Enhancement of the Performance of Ring Laser Gyro using Silane Compound

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2014 by IJETT Journal
Volume-11 Number-4
Year of Publication : 2014
Authors : A.Ramchander Rao , G.D.Purnachandra , M.K. Gupta , Dr.I.M Chhabra , K Rambabu , C.Vishnu Vardhan Reddy
  10.14445/22315381/IJETT-V11P237

Citation 

A.Ramchander Rao , G.D.Purnachandra , M.K. Gupta , Dr.I.M Chhabra , K Rambabu , C.Vishnu Vardhan Reddy. "Enhancement of the Performance of Ring Laser Gyro using Silane Compound ", International Journal of Engineering Trends and Technology (IJETT), V11(4),185-187 May 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

Ring Laser Gyro ( RLG ), in its original form is insensitive to small rotation rates. This insensitivity occurs because of the coupling between the two counter propagating travelling waves, having a very low frequency difference. The main reason of coupling between the waves is due to the scattering from the surfaces of optical components like mirrors and prisms, being used for the turning of the lasers. The scattering from the surfaces is directly related with the level of surface roughness as well as Sub Surface Damage (SSD) generated during the polishing of optical components. This paper presents the experimental studies carried out using silane compound as a modifier of polishing powder for achieving the super polishing of fused silica glass. It has minimized the surface roughness and in turn coupling effect between the counter propagating waves, enhancing the performance of the RLG

References

[1] Zhong ZW (2003) “Ductile or partial ductile mode machining of brittle materials” Int J Adv Manuf Technol 21(8):579–585
[2] Zhong ZW (2002) “Surface finish of precision machined advanced materials” J Mater Process Technol 122(2–3):173–178
[3] S.Dominika,,AndrzejG?adki, Krystyna Mazur, Ewa Talik “ Optimisation of the epi-ready semi-insulating gas wafer preparation procedure” Vacuum 72 (2004) 217–22
[4] K. Gottfried, I. Schubert S.E. Schulz, T. Gessner “Cu/Barrier CMP on porous low-k based interconnect schemes” Microelectronic Engineering 83 (2006) 2218–2224.
[5] Zhu Yonghua , Pan Guoshun1 Dai Yuanjing, Luo Jianbin, Liu Yan “Influence of slurry as ph value on chemical mechanical polishing of hard disc glass substrate” Chinese Lubrication Engineering 32 (2007) 24–27
[6] J.Z. Sun, J Z Sun, G S Pan, Y Zhou, Y H Zhu, J B Luo, X C Lu, Y Liu “Effect of ingredients in slurry containing alumina on chemical mechanical polishing of hard disc substrate” Journal of Engineering Tribology: Part J 223 (2009) 1003–1011.
[7] Y Tang E.J., Cheng G.X., Ma X.L., Pang X.S., Zhao Q. “Surface modification of zinc oxide nanoparticle by PMAA and its dispersion in aqueous system” Appl.Surf.Sci., 2006, v.252, iss.14, p.5227-5232.
[8] Zhang Z.F., Lei H “Preparation of a-alumina/polymethacrylic acid composite abrasive and its CMP performance on glass substrate” Microelectronic Engineering, 2008, v.85, iss.4, p.714-720.
[9] Lei H., Lu H.S., Luo J.B., Lu X.C. Preparation of a alumina- g-polyacrylamide composite abrasive and chemical mechanical polishing behavior. Thin Solid Films, 2008, v.516, iss.10, p.3005-3008.
[10] Lei H., Zhang P.Z. “ Preparation of alumina/silica core-shell abrasives and their CMP behavior “ Appl.Surf.Sci., 2007, v.253, iss.21, p.8754 8761
[11] Zhang Zefang, Yu Lei, Liu Weilia, Song Zhitang, “Surface modification of ceria nanoparticles and their chemical mechanical polishing behavior on glass substrate” Applied Surface Science,Vol.253, Issue 11, 30 March 2007, Pages 4951–4954
[12] ZhongHua Gu, Yan Zhou, Tuo Li, Hua Gong, Yan Liu “Preparation of silane modi?ed SiO2 abrasive particles and their ChemicalMechanical Polishing (CMP) performances” Wear 273 (2011) 100–104

Keywords
RLG, Surface Roughness, SSD, Silane compound