Effect of Cutting Parameter for Turning En-31 Material using RSM

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2016 by IJETT Journal
Volume-36 Number-4
Year of Publication : 2016
Authors : Mahesh k. sharma, Sanjay Singh, Rakesh kumar
  10.14445/22315381/IJETT-V36P231

MLA 

Mahesh k. sharma, Sanjay Singh, Rakesh kumar"Effect of Cutting Parameter for Turning En-31 Material using RSM", International Journal of Engineering Trends and Technology (IJETT), V36(4),166-173June 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
This paper presents the effect of process parameter in turning operation to predict surface roughness and material removal rate (MRR). The turning process by using bank a 34 lathe machine. The parameters that affect the turning operation are vibration, tool wear, surface roughness, material removal rate etc. Among this surface roughness and material removal rate are an important factor that affects the quality in manufacturing process. The main objective of this paper is to predict the surface roughness and material removal rate on EN -31 alloy steel by using coated carbide tool. A mathematical model is developed using regression technique and optimization is carried out using Box- Behnken of response surface methodology. Therefore, this study attempts the application of response surface methodology to find the optimal solution of the cutting conditions for giving the minimum value of surface roughness and maximum MRR .

 References

[1] M.Y.Noordin, Venkatesh VC, Sharif S, Elting S, Abdullah , “Application of response Surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel”. Journal of Materials Processing Technology, 2003.
[2] Dilbag singh and P.venkateswara rao, “A surface roughness prediction modal for hard Turning process”,2005
[3] Kandananond.K, “The Determination Of Empirical Model For Surface Roughness In Turning Process Using Design Of Experiment”, vol., 8,issue. 10, 2009 ,
[4] Hwang. Y. K and Lee. C. M, “Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments, Journal of Mechanical Science and Technology”, vol. 24,issue.8 ,2010,pp. [5] Sahoo P., “ Optimization Of Turning Parameters For Surface Roughness Using RSM and GA”, Advances in Production Engineering & Management vol.6 ,2011,pp.197-208
[6] Alexandra Stanimir. A, “ Regressions Modeling Of Surface Roughness In Finish Turning Of Hardened 205cr115 Steel Using Factorial Design Methodology”, Fiability& Durability No 1(7),2011
[7] Aruna. M and Dhanalaksmi. V, “Design Optimization of Cutting Parameters when Turning Inconel 718 with Cermet Inserts”, World Academy of Science, Engineering and Technology ,vol. 61, 2012.
[8] Wasif M. G., Safiulla. M, “ Evaluation Of Optimal Machining Parameters Of Nicrofer C263Alloy Using Response Surface Methodology While Turning On Cnc Lathe Machine” , International Journal of Mechanical and Industrial Engineering (IJMIE), Vol-2,Iss-4,2012
[9] Dr.G.Harinath Gowd,M.Gunasekhar ready and Bathinpua sreenivasnlu , “Empirical Modeling of Hard Turning Process Using response surface methodology”,2012.
[10] Frauko puh,Toni segota,Zaran jurkovic, “Optimization of hard turning process parameter with pcbn tool based on response surface methodology ”,2012
[11] A.D.Bagawade,P.G.Ramdasi,R.S.Pawade,P.k.Bramhan kar, “The effects of cutting condition on Chip area ratio and surface roughness in turning of AISI 52100 steel”,2012 [12] Basha N.Z., Vivek S. “Optimization of CNC Turning Process Parameters on Aluminium 6061 Using response surface methodology”, Engineering Science and Technology An International Journal (ESTIJ),2013
[13] Dr. C. J. Rao , Dr. D. Nageswara Rao , P. Srihari, “Influence of cutting parameters On cutting force and surface finish in turning operation”,2013
[14] Vikas B. Magdum and Vinayak R. Naik, “Evaluation and Optimization of machining parameter for turning of EN-8 steel”, International Journal of Engineering Trends and Technology, volume 4,pp 1564-1568,may 2013
[15] Ranganath M S and Vipin, “Effect of Machining Parameters on Surface Roughness with Turning Process- Literature Review”, International Journal of Advance Research and Innovation, 2014
[16] Ranganath. M. S., Vipin , Nand Kumar , Rakesh Kumar, “Experimental Analysis of Surface Roughness in CNC Turning of Aluminium Using Response Surface Methodology”,2015
[17] Dharindon Sonowal, Thuleswar Nath and Dhrupad “A review on optimization of cutting parameters on turning” International Journal of Engineering Trends and Technology, volume 28,pp 54-60,oct 15

Keywords
Turning process, Surface roughness, MRR, Response Surface method, DOE, ANOVA.