A Brief Review on Corrugated Composite Sandwich Structure

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2016 by IJETT Journal
Volume-40 Number-4
Year of Publication : 2016
Authors : Syed Mufeez Ahmed
  10.14445/22315381/IJETT-V40P232

MLA 

Syed Mufeez Ahmed"A Brief Review on Corrugated Composite Sandwich Structure", International Journal of Engineering Trends and Technology (IJETT), V40(4),201-205 October 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
Fibre composite sandwich has become the new generation of material used in civil infrastructure in the last decade. A structural sandwich is a special form of a laminated composite fabricated by attaching two thin but stiff skins to the lightweight but thick core. Because of this special feature, the sectional area is increased and consequently an increase in its flexural rigidity. The strength of this type of construction results from the combination of properties from the skin, core and interface. In a sandwich structure, the strong and stiff skins carry most of the in-plane and bending loads while the core mainly bears the transverse shear and normal loads.

 References

[1] Fibre Metal Laminates - An Introduction edited by Ad Vlot, Jan Willem Gunnink, Delft University of Technology, Faculty of Aerospace Engineering Delft, The Netherlands.
[2] Vogelesang LB, Vlot A. Development of fibre metal laminates for advanced. J Mater Process Technol 2000;103: 1–5.
[3] Botelho EC, Silva RA, Pardini LC, Rezende MC. A review on the development and properties of continuous fibre/epoxy/aluminum hybrid composites for aircraft structures. Mater Res 2006;9(3):247–256.
[4] KAUFMAN, J. G., “Fracture Toughness of 7075-T6 and – T651 sheet, plate and multilayered adhesive-bonded panels,” Jounal of Basic Engineering, vol. 89.
[5] JOHNSON, W. S., “Damage tolerance evaluation of adhesively laminated titanium,” ASME Journal of Materials Science and Technology, vol. 105, no. 3, pp. 182 – 187, 1983.
[6] VOGELESANG, L. B., MARISSEN, R., AND SCHIJVE, J., “A new fatigue resistant material: Aramid reinforced aluminum laminate (ARALL),” in Proceedings of the 11th ICAF Symposium, 1981.
[7] WU, G. AND YANG, J.-M., “The mechanical behavior of GLARE laminates for aircraft structures,” JOM, pp. 72 – 79, 2005.

Keywords
Composite Sandwich Structure, Corrugated Sandwich Structure.