Design and analysis of high frequency switched full - bridge dc - dc converter for ups in telecommunication applications
 |
International Journal of Engineering Trends and Technology (IJETT) | 
|
| © 2013 by IJETT Journal | ||
| Volume-4 Issue-4 |
||
| Year of Publication : 2013 | ||
| Authors : Mrs.K.Rajalakshmi , Mr.S.P.Karthick |
Citation
Mrs.K.Rajalakshmi , Mr.S.P.Karthick. "Design and analysis of high frequency switched full - bridge dc - dc converter for ups in telecommunication applications". International Journal of Engineering Trends and Technology (IJETT). V4(4):1176-1180 Apr 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.
Abstract
This paper describes the design and implementation of high frequency switched full - bridge DC - DC converter using analog control techniques. The major aim of this paper is to provide constant DC voltage to each of the switching equipment of the telephone exchange. In general, all the telephone exchanges are having switching equipment to trace out the route or the communication path to the destination. The voltage to be fed to the switching equipment is obtained from the series connected batteries and is delivered to the DC - DC converter. The DC - DC converter consists of a ferrite transformer. The voltage from the battery is being stepped down by the ferrite transformer according to the requirement. Filters are employed to suppress the harmonics and noise contents in the output voltage. The voltage obtained from the DC - DC converter is controlled by the regulating pulse width modulator using PWM technique.
References
[1]. Pernia A., Prieto M., Lopera J., “High power density DC/DC converter using thick - film hybrid technology”, Conference Procee dings 15 th Annual IEEE Applied Power Electronics Conference, Vol.1,pp.277 - 283,2000
[2].Zhou X., Donati M., Amoroso L., Lee F.C., “Improved Light Load Efficiency For Synchronous Rectifiern Buck Converter ”,Proc. 14 th Annual IEEE Applied Power Electronics Conference and Exposition, Vol.1,pp.295 - 302, 1999
[3].R.A.Fisher, K.D.T.Ngo, and M.H.Kuo,”A 500 KHz 250W dc - to - dc converter with multiple outputs controlled by phase - shift PWM and magnetic amplifiers”,in Proc. High Fr equency Power Conversion Conf., 1988,pp.199 - 110
[4].N.Mohan, T.M.Undeland, and W.P.Robbins, Power Electronics, Converters,applications and Design,John Wiley & sons, 1989
[5].Linfinity Micro Electronics Application Note, Implementing Regulating Pulse Width Modulator.
Keywords
DC - DC converter, regulating pulse width modulator, switching equipment, PWM technique