Evaluation and Optimization of Machining Parameter for turning of EN 8 steel

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-5                      
Year of Publication : 2013
Authors : Vikas B. Magdum , Vinayak R. Naik

MLA 

Vikas B. Magdum , Vinayak R. Naik. "Evaluation and Optimization of Machining Parameter for turning of EN 8 steel". International Journal of Engineering Trends and Technology (IJETT). V4(5):1564-1568 May 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.

Abstract

This study used for optimization and evaluation of machining parameters for turning on EN8 steel on Lathe machine. This study investigates the use of tool materials and process parameters for machining forces for selected parameter range and estimation of optimum performance characteristics. Develop a methodology for optimization of cutting forces and machining parameters.

References

[1] R W Lanjewar, P Saha, U Datta, A J Banarjee, S Jain and S Sen; “ Evaluation of machining parameters for turning of AISI 304 austenitic stainless s teel on auto sharpening machine ,” journal of scientific and Industrial research;Vol.67, PP 282 - 287 , April 2008 .
[2] E. Daniel Kirby, “ A Parameter design study in a Turning operation using the Taguchi Method ,” the Technology Interface/Fall; PP 1 - 14 , 2006 .
[3] M. Nalbant, H. Gokaya, G. Sur, “ Ap plication of Taguchi method in the optimization of cutting parameters for surface roughness in turning; Materials and Design ,” 1379 – 1385 , 28, 2007 .
[4] G. Akh yar, C.H. Che Haron, J.A. Ghani, “ Application of Taguchi Method in the Optimization of Turning Parame ters for Surface Roughness; International Journal of Science Engineering and Technology ,” Vol. 1, No. 3, 60 - 66 , 2008 .
[5] Ersan Aslan a, Necip Camuscu a, Burak Birg ren, “ Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3 + TiCN mixed ceramic tool; Materials and Design ,” 1618 – 1622 , 28 , 2007 .
[6] Indrajit Mukherjee, Pradip Kumar Ray , “ A review of optimization techniques in metal cutting processes; Computers & Industrial Engineering ,” 15 – 34 , 50, 2006 .
[7] J. Paulo Davim , Lui ́s Figueira , “ Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques; Materials and Design ,” 1186 – 1191 , 28 , 2007 .
[8] Alakesh Manna, Sandeep Salodkar , “ Optimization of machining conditions for e ffective turning of E0300 alloy steel; journal of materials processing technology ,” 147 – 153 , 203, 2008 .
[9] Zhang Xueping a , Gao Erwei a , C. Richard Liu , “ Optimization of process parameter of residual stresses for hard turned surfaces; Journal of Materials Proce ssing Technology ,” 4286 – 4291 , 209, 2009.
[10] Chorng - Jyh Tzeng, Yu - Hsin Lin, Yung - Kuang Yang a , Ming - Chang Jeng , “ Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis; journal of mater ials processing technology ,” 2753 – 2759 , 2 09 , 2009 .
[11] Tzeng Yih - fong, “ Parameter design optimisation of computerised numerical control turning tool steels for high dimensional precision and accuracy; Materials and Design ,” 665 – 675 , 27 , 2006 .
[12] Farhad Kolahan, M oh sen Manoochehri, Abbas Hosseini, “ Simultaneous Optimization of Machining Parameters and Tool Geometry Specifications in Turning Operation of AISI1045 Steel ,” World Academy of Science, Engineering and Technology 74 2011.
[13] Sijo M.T, Biju.N , “ Taguchi Method for Optimization of Cutting P arameters in Turning Operations,” Proc. of. Int. Conf. on Advances in Mechanical Engineering 2010.
[14] Sijo M.T, Biju.N , “ Taguchi Method for Optimization of Cutting Parameters in Turning Operations ,” Proc. of. Int. Conf. on Advances in Mechanical Engineering 2010.
[15] Hari Singh “ Optimizing Tool Life of Carbide Inserts for Turned Parts using Taguchi’s Design of Experiments Approach,” Proceedings of the International MultiConference of Engineers and Computer Scientists 2008 Vo l II IMECS 2008, Hong Kong , 19 - 21 March, 2008 .
[16] Hari Singh, Pradeep Kumar, “ Tool wear optimization in turning operation by Taguchi method; Indian Journal of Engineering and Material Science, ” Vol. II, 19 - 24 , February 2004 .
[17] Dr. S.S.Mahapatra Amar Patnaik Pra bin a Ku. Patnaik, “ Parametric Analysis and Optimization of Cutting Parameters for Turning Operations based on Taguchi Method ,” Proceedings of the International Conference on Global Manufacturing and Innovation - July 27 - 29, 2006.
[18] Kompan Chomsamutr, Somkiat Jon gprasithporn “ The Cutting Parameters Design for Product Quality Improvement in Turning Operations: Optimization and Validation with Taguchi Method,

Keywords
Turning, Optimization, Evaluation, Taguchi method, Orthogonal array, ANOVA.