Controller For Standalone Hybrid Renewable Power Generation

Controller For Standalone Hybrid Renewable Power Generation

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-6                      
Year of Publication : 2013
Authors : P. Madhu Prabhuraj , R.M. Sasiraja

Citation 

P. Madhu Prabhuraj , R.M. Sasiraja."Controller For Standalone Hybrid Renewable Power Generation". International Journal of Engineering Trends and Technology (IJETT). V4(6):2498-2502 Jun 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.

Abstract

The project utilizes the resources available locally like sunlight, wind and biogas plant which can be installed with aids from government. A controller is designed to switch between generation sources with preference to renewable modes. When renewable energy is excess, the biogas is shut down and the power is used to pump water to a higher level, which can later be used for agriculture and micro hydro generation. In the hybrid system, energy has a higher reliability, can be cost effective and improve the quality of life in small town. At large scale and hybrid system will independently provide a stable power source and daily gas for small towns. Hybrid power system that aims to increase the system efficiency and increase use of renewable energy based hybrid power system. In order to meet sustained load demands during varying natural conditions, different renewable energy sources need to be integrated with each other like solar ,wind , waste of energy municipal waste/ liquid waste, small hydro.

References

[1] Toshiro Hirose and Hirofumi Matsuo, fellow, IEEE ” Standalone Hybrid Wind - Solar Power Generation System Applying Dump Power Control Without Dump Load ” IEEE transactions on industrial electronics, vol. 59, no. 2, February 2012
[2] S. - K. Kim, J. - H. Jeon, C. - H. Cho, J. - B. Ahn, and S. - H. Kwon, “Dynamic modeling and control of a grid connected hybrid generation system with versatile power transfer,” IEEE Trans. Ind. Electron. , vol. 55, no. 4,pp. 1677 – 1688, Apr. 2008 .
[3] K. Kobayashi, H. Matsuo, and Y. Sekine, “An excellent operating point tracker of the solar - cell power supply system,” IEEE Trans. Ind. Electron. , vol. 53, no. 2, pp. 495 – 499, Apr. 2006
[4] Fra nçois Guérin, Dimitri Lefebvre, Alioune Badara Mboup,Jean - Yves Parédé, Eric Lemains, and Pape Alioune Sarr Ndiaye, “Hybrid Modeling for Performance Evaluation of Multisource Renewable Energy Systems” IEEE transactions on automation science and engineering, vol. 8, no. 3, july 2011
[5] Rajiv K. Varma, Vinod Khadkikar, and Ravi Seethapathy” Nighttime Application of PV Solar Farm as STATCOM to Regulate Grid Voltage” IEEE transactions on energy conversion, vol. 24, no. 4, december 2009
[6] A. Elmitwally , Member, IEEE, and Mohamed Rashed, Member, IEEE” Flexible Operation Strategy for an Isolated PV - Diesel Microgrid Without Energy Storage” IEEE transactions on energy conversion, vol. 26, no. 1, march 2011
[7] Cristian Drago? Dumitru, Adrian Gligor ”Petru Maior”University of Târgu Mure?, Romania “ modeling and simulation of renewable hybrid power system using matlab/simulink environment ”
[8] R. Belfkira, O. Hajji, C. Nichita, and G. Barakat, “Optimal sizing of stand - alone hybrid wind/pv system with battery storage,” in Proc. Power Electron. Appl. Eur. Conf. , Sep. 2007, pp. 1 – 10.
[9] S. Wang and Z. Qi, “Coordination control of energy management for stand - alone wind/pv hybrid systems,” in Proc. IEEE ICIEA , May 2 009, pp. 3240 – 3244.
[10] C. Liu, K. T. Chau, and X. Zhang, “An efficient wind - photovoltaic hybrid generation system using doubly excited permanent - magnet brushless machine,” IEEE Trans. Ind. Electron. , vol. 57, no. 3, pp. 831 – 839, Mar. 2010.
[11] F. Bon anno, A. Consoli, S. Lombardo, and A. Raciti, “A logistical model for performance evaluations of hybrid generation systems,” IEEE Trans. Ind. Appl. , vol. 34, no. 6, pp. 1397 – 1403, Nov./Dec. 1998.
[12] M. H. Nehrir, B. J. LaMeres, G. Venkataramanan, V. Ger ez, and L. A. Alvarado, “An approach to evaluate the general performance of stand - alone wind/photovoltaic generating systems,” IEEE Trans. Energy Convers. , vol. 15, no. 4, pp. 433 – 439, Dec. 2000.
[13] J. M. Carrasco, L. G. Franquelo, J. T. Bialasiewicz, E . Galvan, R. C. P. Guisado, M. A. M. Prats, J. I. Leon, and N. Moreno - Alfonso, “Power - electronic systems for the grid integration of renewable energy sources: A survey,” IEEE Trans. Ind. Electron. , vol. 53, no. 4, pp. 1002 – 1016, Jun. 2006.
[14] S. Jiao, G. Hunter, V. Ramsden, and D. Patterson, “Control system design for a 20 kW wind turbine generator with a boost converter and battery bank load,” in Proc. PESC , Sep./Oct. 2001, pp. 2203 – 2206.
[15] S. Tanezaki, T. Matsushima, and S. Muroyama, “Stand - alone hybrid power supply system composed of wind turbines and photovoltaic modules for powering radio relay stations,” in Proc. IEEE INTELEC , Oct. 2003, pp. 457 – 462.

Keywords
Dump load, dump power control, Fuzzy Logic Controller, low cost, standalone hybrid power generation.