Design and Development of a Small Heat Exchanger as Auxiliary Cooling System for Domestic and Industrial Applications

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)
  
© 2013 by IJETT Journal
Volume-5 Number-6
Year of Publication : 2013
Authors : O.T.Araromi , A.O.Oyelaran , L.O.Ogunleye

MLA 

O.T.Araromi , A.O.Oyelaran , L.O.Ogunleye. "Design and Development of a Small Heat Exchanger as Auxiliary Cooling System for Domestic and Industrial Applications". International Journal of Engineering Trends and Technology (IJETT). V5(6):314-319 Nov 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

The epileptic supply of power from the national grid in Nigeria has made many industries to engage Internal Combustion Engine generators as alternative to providing energy required for production. The excessive use of these machines has mostly altered their effective performance, thereby necessitating more frequent maintenance or repair than recommended by the manufacturers. Frequent break-downs of these machines reduce rate of production of these industries and by extension, this adversely affects the economy development of the country. A known engineering enterprise in Kano; North West region of Nigeria due to the same factor stated above, subjected her 30 kva generator to run almost throughout the working hours of the week. Initially, the generator run perfectly within the manufacturer recommended 100 hours of operation before conducting maintenance works. After sometime, due to excessive use, the generator hardly met half the required service hours before overheating and this resulted in frequent damage of the gasket and repair of the valve outlets, consequently increased the cost of maintenance. A Small Tube and Shell Heat Exchanger with parallel/counter flow that would serve as an auxiliary cooling system for the radiator was designed and developed.

References

[1] J. Coulson and J. Richardson, “Chemical engineering- fluid flow, heat and mass transfer,”Journal of Reed Educational & Professional Technology, Vol. 1, pp 1132-1134, 1999.
[2] D. P. Dewitt and F. P. Incropera, Fundamental of Heat and Mass Transfer” 3rd ed., NY, USA: Wiley Press, 1990.
[3] E. Dogan, “Thermoeconomic optimization of baffle spacing for shell and tube heat exchangers,” Journal of Energy Conservation and Management, Vol. 47, pp 1478–1489, 2005
[4] A. J. Hugo, (2008) Chemical Reaction Modeling; Multiphase Reactive Flow, 2nd ed., Berlin, Heidelber Germany: Springer Verlag, 2008.
[5] Kakaç and L. Hongtan, Heat Exchangers; Selection, Rating and Design” 2nd ed., China: CRC Press, 2002.
[6] J. Kerr. (2011) Auto tech: radiator shutters [Online]. Available: http//www.tandfonline.com/aut-
[7] R. Ladewal and G. Kamaruddin, “ Design of small tube and shell heat exchanger,” in Proc. University of Malaysia Institutional Repository of UMP Research and Publication, 2010, pp. 113
[8] R.K. Rajput, Heat and Mass Transfer, 4th ed., New Delhi: S. Chand and Company Ltd, 2000.

Keywords
Flow, Fluid, Heat, Transfer and Tube.