Flexural Behaviour of Concrete Beams With Composite Reinforcement
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2020 by IJETT Journal | ||
| Volume-68 Issue-4 |
||
| Year of Publication : 2020 | ||
| Authors : A. Abdul Hameed, KU. Mani Kandhan, S. Gnana Venkatesh, K. C. Denesh |
||
| DOI : 10.14445/22315381/IJETT-V68I4P211S |
Citation
MLA Style: A. Abdul Hameed, KU. Mani Kandhan, S. Gnana Venkatesh, K. C. Denesh "Flexural Behaviour of Concrete Beams With Composite Reinforcement" International Journal of Engineering Trends and Technology 68.4(2020):59-63.
APA Style:A. Abdul Hameed, KU. Mani Kandhan, S. Gnana Venkatesh, K. C. Denesh . Flexural Behaviour of Concrete Beams With Composite Reinforcement International Journal of Engineering Trends and Technology, 68(4),59-63.
Abstract
This paper describes the properties and behavior of RC beams with composite reinforcement. This studies the comparative resulting advantages by the in-filled steel pipes. This also discuss about implementing of this reinforcement in construction and the forthcoming benefits of this project. The beams casted were tested for flexure, under two-point loading condition. Different structural parameters were investigated.
Reference
[1] Abdelrahim Dessouki.K Ahmed Yousef.H ,Mona Fawzy .M (2015) “Investigation of in-plane moment connections of Ibeams to square gravity loads” HBRC Journal Vol.no 11, PP (43–56)
[2] Aiello. M. A, Leuzzi. F, Centonze. G, Maffezzoli. A (2009) “Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength” Waste Management Vol.no 29, PP (1960–1970)
[3] Ayman Moustafa, Mohamed ElGawady.A (2015) “Mechanical properties of high strength concrete with scrap tire rubber” Construction and Building Materials Vol.no 93, PP (249–256)
[4] Brown. N. K, Kowalsky. M. J, Nau. J .M (2015) “Impact of D/t on seismic behavior of reinforced concrete filled steel Fig.5 Deflection at mid span tubes” Journal of Constructional Steel Research Vol .no 107, PP (111–123)
[5] Esmaeel Esmaeeli, Joaquim Barros.A.O (2015) “Flexural strengthening of RC beams using Hybrid Composite Plate (HCP): Experimental and analytical study” Composites Vol.no 79, PP (604-620)
[6] Fabiana Maria da Silva, Luisa Andréia Gachet Barbosa, Rosa Cristina Cecche Lintz, Ana Elisabete Jacintho(2015) “Investigation on the properties of concrete tactile paving blocks made with recycled tire rubber” Construction and Building Materials Vol.no 91, PP (71–79)
[7] Haolin Su , Jian Yang, Tung-Chai Ling , Gurmel S. Ghataora , Samir Dirar (2014) “Properties of concrete prepared with waste tyre rubber particles of uniform and varying sizes” Journal of Cleaner Production Vol.no 19, PP (1-9)
[8] Huiyong Ban, Brian Uy, Sameera Wijesiri Pathirana, Ian Henderson, Olivia Mirza, Xinqun Zhu (2015) “Timedependent behaviour of composite beams with blind bolts under sustained loads” Journal of Constructional Steel Research Vol. no 112, PP (196–207) 39
[9] Jia-Bao Yan, Richard Liew.J. Y, Xudong Qian, Jun-YanWang (2015) “Ultimate strength behavior of curved steel–concrete– steel sandwich composite beams” Journal of Constructional Steel Research Vol.no 115, PP (316–328)
[10] E.K. Mohanraj and Dr. S. Kandasamy, “Experimental Behaviour of Axially Loaded Slender Hollow Steel Columns In-filled with Rubber Concrete, New Building Materials & Construction World”, August 2007, Vol: 13, No: 02, pp.166- 174.
Keywords
Composite reinforcement, flexure, in-filled pipes, structural parameters.