IJBTT

Monitoring and Control System for Industrial Parameters Using Can Bus

	International Journal of Engineering Trends and Technology (IJETT)
	© 2014 by IJETT Journal
	Volume-9 Number-10
	Year of Publication : 2014
	Authors : SargunaPriya.N , Jothi Mani.M , Amudha.P
	10.14445/22315381/IJETT-V9P292

Citation 

SargunaPriya.N , Jothi Mani.M , Amudha.P. "Monitoring and Control System for Industrial Parameters Using Can Bus", International Journal of Engineering Trends and Technology (IJETT), V9(10),479-484 March 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

In modern industrial production, the working temperature change reflects the operating status of equipments and change of many physical characteristics. So the temperature is an important parameter, which needs to be monitored. The workers can make right judgments and operation by a temperature monitor. The embedded microcontroller is used as a CPU of the system. The system realizes the real-time remote data collection monitoring and storage through the CAN bus protocol. In the industrial monitoring field, the parameters are sensed by the respective sensors and are monitored by the individual microcontrollers. Finally, the values are displayed with the help of individual LCD displays. All the parameters such as temperature, pressure and water level are sensed by the sensors and their respective codes are installed in the PIC microcontroller. The microcontroller is connected to the PC through CAN bus and the output will be displayed in that PC with the help of RS232 serial communication. The system platform can be applied to certain equipments of the power system, intelligent industrial remote monitoring, intelligent furniture monitoring, intelligent warehouse monitoring and so on. The system is reliable and stable. It is the most effective and most economical means of equipment safety monitoring. So it has very good social prospects.

References

[1]Zhang Lihong, Sun Lei, Han Shufen, Lu Weina, Hebei, “Measurement and Control System of Soil Moisture of Large Greenhouse Group Based on Double CAN Bus”, ICMTMA, Third International Conference, China, Jan 06, 2011
[2]Xiaoming Li, Mingxiong Li, “An Embedded CAN-BUS Communication Module for Measurement and Control System”, ICEEE, International Conference, China, Nov 07, 2010
[3]Renjun Li, Chu Liu, Feng Luo, “A design for automotive CAN bus monitoring system”, VPPC, Shangai, Sept 03, 2008
[4]Donglin Wang, Chandana. S, Renlun He, Jiuqiang Han, Xiangyu Zhu, Ke Zou, Yong He, “Intelligent Sensor Design in Network Based Automatic Control”, ICJNN,International Joint Conference, Canada, July 18,2010
[5]Mahmoud Meribout,,“A Multi-sensor Device for Real-Time Multiphase Flow Metering”, Instrumentation & Measurement, IEEE ,July 8,2010
[6]Jinsoo Han ,Haeryong Lee, “Remote-Controllable and Energy-Saving based on ZigBee”, Consumer Electronics, IEEE, August 1,2009
[7]Ying-Wen Bai and Chi-Huang Hung, “Remote Power On/Off Control and Current Measurement for Home Electric Outlets Based on a Low- Power Embedded Board and ZigBee Communication” ,Proceedings of the 2008 International Symposium on Consumer Electronics, Algarve, Portugal, 14-16 Apr. 2008
[8]Jui-Yu Cheng, Min-Hsiung Hung, and Jen-Wei Chang, “A ZigBee- Based Power Monitoring System with Direct Load Control Capabilities” , Proceedings of the 2007 IEEE International Conference on Networking, Sensing and Control, London, UK, 15-17 Apr. 2007
[9] C. H. Lo, Y. K. Wong, and A. B. Rad, “Intelligent system for process supervision and fault diagnostic in dynamic physical systems” ,IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 581–592, Apr. 2006
[10]J. Chaoki, L. Larachi, and M. P. Dudokovi´c, “Non-Invasive Monitoring of Multiphase Flows”, Amsterdam, The Netherlands: Elsevier, 2006

Keywords
CAN bus protocol, Control, Microcontroller, Monitor, Sensors.