Optimization and Design of a Laser-Cutting Machine using Delta Robot

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2014 by IJETT Journal
Volume-10 Number-4
Year of Publication : 2014
Authors : B.Moharana , Rakesh Gupta, Bashishth Kumar Kushwaha
  10.14445/22315381/IJETT-V10P233

MLA 

B.Moharana , Rakesh Gupta, Bashishth Kumar Kushwaha. "Optimization and Design of a Laser-Cutting Machine using Delta Robot", International Journal of Engineering Trends and Technology (IJETT), V10(4),176-179 April 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

Industrial high-speed laser operations the use of delta parallel robots potentially offers many benefits, due to their structural stiffness and limited moving masses. This paper deals with a particular Delta, developed for high-speed laser cutting. Parallel delta robot has numerous advantages in comparison with serial robots: Higher stiffness, and connected with that a lower mass of links, the possibility of transporting heavier loads, and higher accuracy. The main drawback is, however, a smaller workspace. Hence, there exists an interest for the research concerning the workspace of robots.in industrial cutting tool maximum do not have more prescribe measurement to cut so that in This paper is oriented to parallel kinematic robots definition, description of their specific application of laser cutting, comparison of robots made by different producers and determination of velocity and acceleration parameters, kinematic analysis – inverse and forward kinematic. It brings information about development of Delta robot. The production of laser cutting machines began thirty years ago. The progress was very fast and at present time every year over 3000 laser cutting machines is installed in the world. Laser cutting is one of the largest applications of lasers in metal working industry.

References

[1] D. Stewart, 1965,”A platform with 6 degrees of freedom”, Proc. of the Institution of mechanical engineers, Vol. 180 (Part 1, 15),pp. 371-386, 1965.
[2] Clavel, R. 1986. Une nouvelle structure de manipulation parallèle pour la robotique légère.R.A.I.R.O. APII, Vol 23, No 6.
[3] Griffis, M., and Duffy, J.,”A Forward Displacement Analysis of a Class of Stewart
Platforms,” Trans. ASME Journal of Mechanisms, Transmissions, and A automation in Design, Vol. 6, No. 6, June 1989, pp. 703-720.
[4] Zhang, D. Parallel Robotic Machine Tools. Oshawa: Springer Science and Business Media, LLC 2010, ISBN 978-1-4419-1116-2, e-ISBN 978-1-4419-1117-9
[5] R. Boudreau and C. M. Gosselin 1999, ”The synthesis of planar parallel manipulators with a genetic algorithm”, ASME Journal of Mechanical Design, Vol 121, pp 533-537.
[6] R. Boudreau and C. M. Gosselin 2001, ”La synthèse d’une plate forme de Gough-Stewart pour un espace de travail atteignable prescrit”, Mech. Mach. Theory 36 (2001) 327-342.
[7] Kosinska, A, Galicki, M. and Kedzior, K. 2003,”Design and optimization of parameters of Delta-4 Parallel Manipulator for a Given Workspace”, Journal of Robotic Systems 20 (9), pp 539-548.
[8] J. A. Snyman and A. M. Hay 2005, ”Optimal synthesis for a continuos prescribed dexterity interval of 3-DOF parallel planar manipulator for different prescribed output workspaces”, Proceeding of CK2005, 12th International Workshop on Computational Kinematics Cassino May 4-6.
[9] M. Gallant and R. Boudreau 2002, ”The synthesis of planar parammel manipulators with prismatic joints for an optimal, singularity-free workspace”, Journal of Robotic Systems 19 (1), pp 13-24.
[10] Zavatsky,M. Delta robot kinematic2009.http://forums.trossenrobotics.com/tutorials/introduction-129/delta-robot-kinematics-3276/.
[11] Xie, S.Q., Wang, G.G. and Liu, Y. (2007) ‘Nesting of two-dimensional irregular parts:an integrated approach’, International Journal of Computer Integrated Manufacturing,Vol. 20, No. 8, pp.741–756.
[12] Xie, S.Q., Tu, Y.L., Liu, J.Q. and Zhou, Z.D. (2001) ‘Integrated and concurrent approach for compound sheet metal cutting and punching’, International Journal of Production Research, Vol. 39, No. 6, pp.1095–1112.
[13] Liu, X.-J., Jeong, J., and Kim, J.: 2003, A three translational DoFs parallel cube-manipulator,Robotica 21, 645–653.
[14] Pierrot, F., Reynaud, C., and Fournier, A.: 1990, DELTA: A simple and efficient parallel robot,Robotica 8, 105–109.
[15] Ryu, J. and Cha, J.: 2003, Volumetric error analysis and architecture optimization for accuracy of HexaSlide type parallel manipulators, Mechanism Machine Theory 38, 227–240.

Keyowrds
Delta robot, parallel kinematic structure, Laser robot, control system.