Experimental Studies on Concrete Replacing Fine Aggregate with Blast Furnace Slags

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2014 by IJETT Journal
Volume-10 Number-8
Year of Publication : 2014
Authors : J. Selwyn Babu , Dr. N. Mahendran
  10.14445/22315381/IJETT-V10P273

MLA 

J. Selwyn Babu , Dr. N. Mahendran. "Experimental Studies on Concrete Replacing Fine Aggregate with Blast Furnace Slags", International Journal of Engineering Trends and Technology (IJETT), V10(8),387-389 April 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

In our world today, concrete has become ubiquitous. It is hard to imagine modern life without it. Approximately five billion tonnes of concrete are used around the world each year. The increasing popularity of concrete as a construction material is placing a huge burden on the natural sand reserves of all countries. In view of the environmental problems faced today considering the fast reduction of natural resources like sand and crushed granite aggregate, engineers have become aware to extend the practice of partially replacing fine aggregate with waste materials. In this present study blast furnace slag from two sources were replaced with fine aggregate and the properties of concrete were studied. The optimum percentages of replacement of these materials were found out. The result obtained encourages the use of these materials as a replacement material for fine aggregate.

References

[1] D Brindha and S Nagan, “Durability studies Copper Slag admixed Concrete”, Asian Journal of Civil Engineering (Building and Housing), Vol. 12 (5), pp 563 – 578, 2011.
[2] Semiha Akcaozoglu and Cengiz Duran Atis, “Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates”, Construction and Building Materials, Vol. 25, pp 4052 – 4058, 2011.
[3] R Arellano Aguilar, O Burciaga Diaz and J I Escalante Garcia, “Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates”, Construction and Building Materials, vol. 24, pp 1166 – 1175, 2010.
[4] Yun Wang Choi, Dae Joong Moon, Yong Jic Kim and Mohamed Lachemi, “Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles”, Construction and Building Materials, vol. 23, pp 2829 – 2835, 2009.
[5] IS 383-1970, Indian standard specification for coarse and fine aggregates from natural sources for concrete (2nd revision), Reaffirmed 1997.
[6] IS 10262-1982, Indian standard recommended guidelines for concrete mix design, Reaffirmed 1999.
[7] IS 516-1959, Indian standard methods of tests for strength of concrete, Edition 1.2, 1991-07

Keywords
Blast Furnace Slag, Ground Granulated Blast Furnace Slag, Fine aggregate replacement.