Fabrication and Analysis of Counter Flow Helical Coil Heat Exchanger
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2014 by IJETT Journal | ||
| Volume-15 Number-5 |
||
| Year of Publication : 2014 | ||
| Authors : Swapnil Ahire , Purushottam Shelke , Bhalchandra Shinde , Nilesh Totala |
||
 10.14445/22315381/IJETT-V15P245 |
Citation
Swapnil Ahire , Purushottam Shelke , Bhalchandra Shinde , Nilesh Totala. "Fabrication and Analysis of Counter Flow Helical Coil Heat Exchanger", International Journal of Engineering Trends and Technology (IJETT), V15(5),229-240 Sep 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
Heat recovery is the capture of energy contained in fluids otherwise that would be lost from a facility. Heat sources may include heat pumps, chillers, steam condensate lines, hot flue gases from boiler, hot air associated with kitchen and laundry facilities, exhaust gases of the engines, power-generation equipment. Helical coil heat exchanger is one of the devices which are used for the heat recovery system. A heat exchanger is a device used to transfer heat between two or more fluids with different temperatures for various application including power plants, nuclear reactors, refrigeration & air condition system, automotive industries, heat recovery system, chemical processing and food industries. Common examples of heat exchangers in everyday use are air pre-heaters and conditioners, automobile radiators, condensers, evaporators, and coolers In present paper analysis of counter flow heat exchanger is done and then variations of various dimensionless numbers i.e. Reynolds Number, Nusselt’s Number and Dean’s number are studied.
References
[1] Salimpour M. R., "Heat transfer Coefficients of shell and coiled tube heat exchangers", Experimental Thermal and Fluid science, 2009.
[2] W. Witchayanuwat and S. Kheawhom, "Heat Transfer Coefficients for Particulate Airflow in Shell and Coiled Tube Heat Exchangers", World Academy of Science, Engineering and Technology, 2009.
[3] Ramesh K. Shah and Dušan P. Sekulic, "Fundamentals of Heat Exchanger Design" ,John Wiley & Sons, Inc.
[4] Ranjit Gouda & Amit Bikram Das, "Some experimental studies on heat transfer augmentation for flow of liquid through circular tubes using twisted angles and tapes", Department of chemical engineering national institute of technology Rourkela, 2008
[5] Tomasz Sobota Cracow , "Experimental Prediction of Heat Transfer Correlations in Heat Exchangers", University of Technology, Poland.
[6] Nasser Ghorbani , Hessam Taherian , Mofid Gorji , Hessam Mirgolbabaei , "An experimental study of thermal performance of shell-and-coil heat exchangers2010.
[7] John W. Rose ,"Heat-transfer coefficients, Wilson plots and accuracy ofthermal ",measurements",Experimental Thermal and Fluid Science, 2004.
[8] C. Y. WANG;J.”,On the low-Reynolds-number flow in a helical pipe”, Fluid Me, 1981.
Keywords
Reynolds Number, Nusselt’s Number, Dean’s Number, overall heat transfer coefficient.