Microcontroller Application in Industrial Control & Monitoring Systems
 |
International Journal of Engineering Trends and Technology (IJETT) | 
|
| © 2014 by IJETT Journal | ||
| Volume-17 Number-1 |
||
| Year of Publication : 2014 | ||
| Authors : Mir Munawar Ali , Syed Habeebullah Hussaini , Mohammed Zaheer Uddin Abbas , Mohammed Zain Ul Abedin , Mohd Habeebullah Khan , Mohd Omair , Mansoor Mohammed Khan , Arutla Thirumala Chaya , Challa.Thirupathi Reddy |
||
 10.14445/22315381/IJETT-V17P205 |
Citation
Mir Munawar Ali , Syed Habeebullah Hussaini , Mohammed Zaheer Uddin Abbas , Mohammed Zain Ul Abedin , Mohd Habeebullah Khan , Mohd Omair , Mansoor Mohammed Khan , Arutla Thirumala Chaya , Challa.Thirupathi Reddy. "Microcontroller Application in Industrial Control & Monitoring Systems", International Journal of Engineering Trends and Technology (IJETT), V17(1),26-31 Nov 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
The use of doubly fed induction generators (DFIGs) in wind turbines has become quite common over the last few years. DFIG wind turbine is an integrated part of distributed generation system. This paper presents a Fuzzy based controller SMES unit in DFIG for improving the ac output on grid side. The excitation system is composed of the rotor-side converter, the grid-side converter, the dc chopper and the superconducting magnet. The superconducting magnet is connected with the dc side of the two converters, which can handle the active power transfer with the rotor of DFIG and the power grid independently, even thou Sutton small fluctuations are occur in active power on AC side. For smoothening the AC output power waveform a Fuzzy based controller is introduced in SMES controller unit, which implemented using simulation developed in MATLAB/ SIMULINK 7.2 version. The model of the FUZZY controlled SMES based excitation system for DFIG is established, and the simulation tests are performed to evaluate the system performance.
References
[1] Muhammad Ali Mazidi; 8051 microcontroller and embedded systems; 2nd Edition, 2011.
[2] Jacqueline Wilkie, Michael Johnson and Reza Katebi; Control Engineering : An Introductory Course; Palgrave Macmillan,2001
[3] Gayakwad. R.A, Op-amps and linear integrated circuits;4th Edition, 2010
[4] John.A.Shaw ; PID Control Algorithm How it works, How to tune it and how to use it; 2nd Edition,2003
[5] Richard Barnett, Larry O’Cull and Sarah Cox; Embedded C Programming and the Atmel AVR; Cengage Learning, 2006
[6] Christian Diedrich, Francesco Russo, Ludwig Winkel ,Terry Blevins; Function Block Application in Control System Based on IEC 61804;
[7] R.W. Lewis; Programming industrial control systems using IEC 1131-3; Revised Edition
[8] Michael Barr. "Embedded Systems Glossary". Neutrino Technical Library. Retrieved 2007-04-21.
[9] Heath, Steve (2003). Embedded systems design. EDN series for design engineers (2 ed.). Newnes. p. 2. ISBN 978-0-7506-5546-0. "An embedded system is a microprocessor based system that is built to control a function or a range of functions."
[10] Michael Barr; Anthony J. Massa (2006). "Introduction". Programming embedded systems: with C and GNU development tools. O`Reilly. pp. 1–2. ISBN 978-0-596-00983-0.
[11] Giovino, Bill. "Micro controller.com – Embedded Systems supersite".
[12] Kinner, Russell H., P.E. Designing Programable Controller Application Programs Using More than One Designer. 14th Annual International Programmable Controllers Conference Proceedings, 1985, p. 97-110.
[13] W. Bolton, Programmable Logic Controllers, Fifth Edition, Newnes, 2009 ISBN 978-1-85617-751-1, Chapter 1.
[14] "Introduction to Industrial Control Networks". IEEE Communications Surveys and Tutorials. 2012.
[15] Stout, T. M. and Williams, T. J. (1995). "Pioneering Work in the Field of Computer Process Control". IEEE Annals of the History of Computing.
Keywords
PLC (Programmable Logic Controllers), DCS (Distributed Control Systems), PID Control Timers and Device Drive Logics.