Optimization of Surface Roughness of Bearing Steel during CNC Hard Turning Process
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2014 by IJETT Journal|
|Year of Publication : 2014|
|Authors : Rony Mohan , Josephkunju Paul C , George Mathew
Rony Mohan , Josephkunju Paul C , George Mathew. "Optimization of Surface Roughness of Bearing Steel during CNC Hard Turning Process", International Journal of Engineering Trends and Technology (IJETT), V17(4),173-175 Nov 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
AISI 52100 is mainly used to manufacture bearings. The process for manufacturing bearing includes turning process followed by three different stages of grinding operation. Nowadays grinding operation are replaced by hard turning process and it has been proved that hard turning process are 30% cost effective. The machining parameters (cutting speed, feed rate, depth of cut) are optimized with considerations of surface roughness. Taguchi’s concepts of orthogonal arrays, signal to noise (S/N) ratio and ANOVA are used to optimize the surface roughness for high speed CNC turning process.
 Anderson P. Paiva and Joao Roberto Ferreira (2007), A multivariate hybrid approach applied to AISI 52100 hardened steel turning optimization, Journal of Materials Processing Technology, (189), 1-3.
 Aouici H., Mohamed AthmaneYallese, Kamel Chaoui, Tarek Mabrouki and Jean Francois Rigal, (2012), Analysis of surface roughness and cutting force components in hard turning with CBN tool : Prediction model and cutting conditions optimization, Measurement, (45), 344-353.
 Attanasio A., D. Umbrello, C. Cappellini, G. Rotella and R. M’Saoubi (2012),Tool wear effects on white and dark layer formation in hard turning of AISI 52100 steel, Wear, (286-287), 98-107.
 Bicek. M, F. Dumont, C. Courbon, F. Pusavec, J.Rech and J. Kopac, (2012) Cryogenic machining as an alternative turning process of normalized and hardened AISI 52100 bearing steel, Journal of Materials Processing Technology, (212), 2609-2618.
 C. J. Rao, D. Nageswara Rao and P Srihari, (2013), Influence of cutting parameters on cutting force and surface finish in turning operation, International Conference On DESIGN AND MANUFACTURING, Procedia Engineering, (64), 1405-1415.
 Dale W. Schwach and Y.B. Guo, (2006) A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue, International Journalof Fatigue, (28), 1838-1844.
 E.O. Ezugwu, (2005), Key improvements in the machining of difficult-to-cut aerospace superalloys, International Journal of Machine Tool and & Manufacture, (45), 1353-1367.
 Fredrik Svahn, AsaKassman-Rudolphi and Erik Wallen, (2003), The in?uence of surface roughness on friction and wear of machine element coatings, Wear, (254), 1092-1098.
 Gupta. A, Hari Singh, and Aman Aggarwal, (2011) Taguchi-fuzzy multi output optimization (MOO) in high speed CNC turning of AISI P-20 tool steel, Expert System with Applications, (38), 6822-6828.
 Ilhan Asilturk and Mehmet Cunkas (2011), Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method, Expert Systems with Applications, (38), 5826-5832.
 Jouini . N, Philippe Revel, Guillaume THQUENNE and Fabien LEFEBVRE, (2013) Characterization of surfaces obtained by precision hard turning of AISI 52100 in relation to RCF life, 5th Fatigue Design Conference, Procedia Engineering, (66), 793-802.
 Luiz Gustavo D. Lopes, Jose Henrique de Freitas Gomes, Andreson Paulo de Paiva, Luiz Fernando Barca, Joao Roberto Ferreria and Pedro Paulo Balestrassi (2013), A multivariate surface roughness modeling and optimization under conditions of uncertainty, Measurement, (46), 2555-2568.
 Meng Liu, Jun-ichiro Takagi and Akira Tsukuda, (2004) Effect of tool nose radius and tool wear on residual stress distribution in hard turning of bearing steel, Journal of Materials Processing Technology, (150), 234-241.
 M.Y. Noordin, V.C. Venkatesh, S. Sharif, S. Elting and A. Abdhulla, (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel, Journal of Materials Processing Technology, (145), 46-58.
 Pradeep L. Menezes, Kishore and Satish V. Kailas, (2009), Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate, Wear, (267), 1534-1549.
 P.G. Benardos and G. C. Vosniakos (2003), Predicting surface roughness in machining: a review, International Journal of Machine Tools & Manufacture, (43), 833-844.
 Ramon QUIZA SARDINAS, REIS Pedro and PAULO DAVIM J., (2006), Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms, Composites Science and Technology, (66), 3083-3088.
 Ramon QUIZA SARDINAS, Santana MR and Brindis EA (2005), Genetic algorithm-based multi objective optimization of cutting parameters in turning process, Engineering Applications in Artificial Intelligence, (19), 127-133.
 Suha Karim Shihaba, Zahid A. Khan, Aas Mohammad and Arshad Noor Siddiquee, (2014), A review of turning of hard steels used in bearing and automotive applications, Production and Manufacturing Research, (2), 24-49.
 T.G. Brito, A.P. Paiva, J.R. Ferreira, J. H. F. Jomes and P. P. Balestrassi, 2014, A normal boundary intersection approach to multi response robust optimization of the surface roughness in end milling process with combined arrays, Precision Engineering, (38), 628-638.
 Yavuz Sun and Hayrettin Ahlatci, (2011), Mechanical and wear behaviors of Al–12Si–XMg composites reinforced with in situ Mg2 Si particles, Materials and Design, (32), 2983-2987
CNC hard turning, surface roughness, AISI 52100, Taguchi, ANOVA.