Optimization of Milling Conditions by Using Particle Swarm Optimization Technique: A Review

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2014 by IJETT Journal
Volume-18 Number-6
Year of Publication : 2014
Authors : Sagar Bahirje , Prof.Vishvajeet Potdar
DOI :  10.14445/22315381/IJETT-V18P251

Citation 

Sagar Bahirje , Prof.Vishvajeet Potdar "Optimization of Milling Conditions by Using Particle Swarm Optimization Technique: A Review", International Journal of Engineering Trends and Technology (IJETT), V18(6),248-251 Dec 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

a review of publications associated with the optimization of milling conditions by particle swarm analysis method. Milling is the most common form of machining, a material removal process, which can create a variety of features on a part by cutting away the unwanted material In order to optimize the cutting conditions, the empirical relationships between input and output variables should be established in order to predict the output. Optimization of these predictive models helps us to select appropriate input variables for achieving the best output performance. In this review paper the study is covered regarding the optimization of different input parameters and results are analyzed.

References

[1] Kennedy, J., & Eberhart, R. (1995). Particle swarm optimization. Proceedings of the IEEE International Conference on Neural Networks (ICNN’95), Perth, Australia.
[2] Marko Reibenschuh F.Cus and Zuperl , “Particle swarm intelligence based optimization of high speed End milling.”Vol3 pp383-393
[3] Haron and Shariff (2010) “Application of GA to optimize cutting condition for minimizing surface roughness in end milling machining process”,Vol37,pp 4650-4659
[4] H.ganesan & g.mohankumar, k.ganesan, k.ramesh kumar “optimization of machining parameters in turning process using genetic algorithm and particle swarm optimization with experimental verification” ISSN : 0975-5462 Vol. 3 No. 2 Feb 2011
[5] Meenu & anuj kumar sehgal” surface roughness optimization by respose Surface methodology and particle swarm optimization” ISSN : 0975-5462 Vol. 5 No.07 July 2013
[6] Vikas Pare, Geeta Agnihotri & C.M. krishna I “Optimization of Cutting Conditions in End Milling Process with the Approach of Particle Swarm Optimization” ssn no. 2231 –6477, volume-1, issue-2, 2011
[7] Baskar, N., Asokan, P., Saravanan, R. and Prabhaharan, G., (2004), “Optimization of machining parameters for milling operations using Non-conventional methods”, Int J Adv Manuf. Technol., Vol. 25, pp. 1078–1088
[8] Alauddin, M., El Baradie, M. A., and Hashmi, M. S. J., (1995) “Computer-aided analysis of a surface-roughness model for end milling”, J. Mater. Process. Technol, Vol. 55, pp. 123–127.
[9] Tandon, V., El-Mounayri. H. and Kishawy, H., (2002), “NC end milling optimization using evolutionary computation”, International Journal of Machine Tools & Manufacture, Vol. 42, pp. 595–605.
[10] Rao, R. V., Savsani, V. J., and Vakharia, D. P., (2011), “Teacher – learning – based optimization: A novel method for constrained mechanical design optimization problems”, Computer – Aided Design, Vol. 43, pp. 303–315
[11] Bharathi, R. S., & Baskar, N. (2011). Particle swarm optimization technique for determining optimal machining parameters of different work piece materials in turning operation. International Journal of Advanced Manufacturing Technology, 54(5–8), 445–463.
[12] Prakasvudhisarn, C., Kunnapapdeelert, S., & Yenradee, P., 2009. Optimal cutting condition determination for desired surface roughness in end milling, International Journal of Advanced Manufacturing Technology, 41(5–6), 440–451
[13] J.G. Li1, Y.X. Yao1, D. Gao1, C.Q. Liu1 and Z.J. Yuan, 2008. Cutting Parameters Optimization by Using Particle Swarm Optimization (PSO), Applied Mechanics and Materials Vols. 10-12 pp. 879-883
[14] Zarei, O., Fesangharyb, M., Farshia, B., JaliliSaffarb, R., Razfarb, M.R., (2008), “Optimization of multi-pass face-milling via harmony search algorithm” J. Mater. Process. Tech., Vol. 5, pp. 1–7.
[15] Huang, H., Li, A., & Lin, X. 2007. Applications of PSO-based wavelet neural network in tool wear monitoring. Proceedings of the IEEE international conference on automation and logistics pp. 2813–2817.
[16] M. Adam Khan & A. Senthil Kumar & A. Poomari, 2011. A hybrid algorithm to optimize cutting parameter for machining GFRP composite using alumina cutting tools. Int J Adv Manuf Technol DOI 10.1007/s00170-011-3553-6. .

Keywords
Milling, Particle swarm optimization, Process parameter optimization