Static and Dynamic Analysis of Base of Vertical Machining Center A Review

Static and Dynamic Analysis of Base of Vertical Machining Center - A Review

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2015 by IJETT Journal
Volume-21 Number-9
Year of Publication : 2015
Authors : Nikunj Aadeshra, Prof. R. L. Patel
DOI :  10.14445/22315381/IJETT-V21P281

Citation 

Nikunj Aadeshra, Prof. R. L. Patel"Static and Dynamic Analysis of Base of Vertical Machining Center - A Review", International Journal of Engineering Trends and Technology (IJETT), V21(9),419-422 March 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

In industry the machine tool aims for high precision and repeatability while it is in operation. Generally machine tool contain several Structural components like base, saddle, headstock ,column of the machine tool play a vital role in helping to achieve consistent performance. Vertical machining center base selected for present study because base is the main structural part of the machine tool. It is a force bearing component of machine tool so it must contain high structural stiffness and good damping characteristics during machining operations. Otherwise it will affect accuracy and performance of that machine tool. So that to overcome this type of issue it is must need to analyze the structure. It is very difficult to analyse the structure analytically and the accurate results for stress, deflection etc. are the limitation of this method in Machine tool. So FEA is the best way to analyse the structural part of the machine tool. Static analysis is useful for estimating stresses, strains and deflections, whereas dynamic analysis deals with the prediction of natural frequencies and corresponding mode shapes, which will in turn, prevent the catastrophic failure of the machine tool .

References

1. B.V Subrahmanyyam, A. Srinivasa Rao,C H Rama Krishna “static and Dynamic Analysis of Machine Tool Structures”, International journal of research in mechanical engineering & technology ,Volume 4,Issue SPL 1(2013-14) 14-18
2. S D kamble, Prof. A S Todkar, .“Structural Analysis for frame of machine tool-EDM using CAE tools through the evaluation phase of the design ”,International journal of advanced engineering technology ,Volume 4,Issue 4 (2013) 07-10
3. S. SyathAbuthakeer, P.V. Mohanram, G. Mohan Kumar.“Structural redesigning of a cnc lathe bed to improve its static and dynamic characteristics”,International journals of engineering 78 (2011) 389-394
4. B. Malleswara Swami, K.SunilRatna Kumar, CH.Ramakrishna,“Design structural analysis of cnc Vertical milling machine bed”, International Journal of Advanced Engineering Technology volume 3, Issue 4(2012) 97-100
5. A.Selvakumar, P.V.Mohanram, “Analysis of alternative composite material for high speed precision machine tool structure”, International journals of engineering,(2012) 95-98
6. YANG Xu-dong,SUN Dong, “The Beam Structure Analysis And Research of Beam-fixed CNC GantryBoring And Milling Machine.”Journal of Convergence Information Technology(JCIT) Volume8, Number 17(2013) 84-90
7. Naeem S. Mian, S. Fletcher, A.P. Longstaff, A. Myers,“ Efficient estimation by FEA of machine tool distortion due to environmental temperature perturbations”, Journals of Precision Engineering 37 (2013) 372– 379

Keywords
machine tool structure, FEA, Static analysis, Dynamic analysis, catastrophic Failure Introduction.