A Review: Design, Modeling and Stress Analysis of high speed helical gear according to Bending strength and Contact strength using AGMA and ANSYS
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2015 by IJETT Journal | ||
| Volume-22 Number-11 |
||
| Year of Publication : 2015 | ||
| Authors : Tanvirkhan A.Malek, Prof. Amit B.Solanki |
||
| DOI : 10.14445/22315381/IJETT-V22P307 |
Citation
Tanvirkhan A.Malek, Prof. Amit B.Solanki "A Review: Design, Modeling and Stress Analysis of high speed helical gear according to Bending strength and Contact strength using AGMA and ANSYS", International Journal of Engineering Trends and Technology (IJETT), V22(11),526-530 April 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
In the gear design the bending stress and surface strength of the gear tooth are considered to be one of the main contributors for the failure of the gear in a gear set. Thus, the analysis of stresses has become popular as an area of research on gears to minimize or to reduce the failures and for optimal design of gears In this paper bending and contact stresses are calculated by using analytical method as well as Finite element analysis. To estimate bending stress modified Lewis beam strength method is used. Pro-e solid modeling software is used to generate the 3-D solid model of helical gear. Ansys software package is used to analyze the bending stress. Contact stresses are calculated by using modified AGMA contact stress method. In this also Pro-e solid modeling software is used to generate contact gear tooth model. Ansys software package is used to analyze the contact stress. Finally these two methods bending and contact stress results are compared with each other.
References
[1] Contact stress analysis for a pair of mating gears by Seok- Chul Hwang, Jin-Hwan Lee, Dong-Hyung Lee c, Seung- Ho Hana, Kwon-Hee Lee a published in Mathematical and Computer Modelling 57 (2013) 40–49 in 2013
[2] A Finite Element Approach to Bending, Contact and Fatigue Stress Distribution in Helical Gear Systems by S. Jyothirmaia, R. Rameshb, T. Swarnalathac, D. Renukad published in Procedia Materials Science 6 (2014) 907 – 918 in 2014
[3] Modified involute helical gears: computerized design, simulation of meshing and stress analysis by Faydor L. Litvin , Alfonso Fuentes , Ignacio Gonzalez-Perez ,Luca Carvenali,Kazumasa Kawasaki , Robert F. Handschuh in Comput. Methods Appl. Mech. Engrg. 192 (2003) 3619– 3655 in 20134.
[4] Design and Structural Analysis of High Speed Helical Gear Using Ansys by J. Venkatesh, Mr. P. B. G. S. N. Murthy published in Int. Journal of Engineering Research and Applications in 2014.
[5] New version of Novikov–Wildhaber helical gears: computerized design, simulation of meshing and stress analysis by Faydor L. Litvin a, Alfonso Fuentes b, Ignacio Gonzalez-Perez a, Luca Carnevali a, Thomas M. Sep published in Comput. Methods Appl. Mech. Engrg.In 2010.
[6] Design,Modeling and Manufacturing of Helical Gear by B.Venkatesh V.Kamala A.M.K.Prasad published in INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL in 2010.
[7] Investigate the Combined Effect of Gear ratio, Helix angle ,Face width and Module on Bending and Compressive stress of Steel alloy Helical Gear by B.Venkatesha S. V.Prabhakar Vattikutia ,S.Deva Prasada published in Procedia Materials Science 6 in 2010.
Keywords
bending stress, contact stress ,face width, helix angle.