Characterisation and Processing of Sago Particle Reinforced Composite

Characterisation and Processing of Sago Particle Reinforced Composite

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2015 by IJETT Journal
Volume-24 Number-3
Year of Publication : 2015
Authors : Dr. P. Prabhakara Rao, B. Ravi Kumar
DOI :  10.14445/22315381/IJETT-V24P228

Citation 

Dr. P. Prabhakara Rao, B. Ravi Kumar"Characterisation and Processing of Sago Particle Reinforced Composite", International Journal of Engineering Trends and Technology (IJETT), V24(3),151-154 June 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
Composite materials are multi-phase materials in which the phase distribution and geometry can be controlled in order to optimize one or more properties depending upon our requirement and application of the composites. The purpose of the paper was to enhance this, as we fabricated the composites using Natural particle reinforced polymer composites. Epoxy resin along with Sago starch particles were used to prepare the specimens in various weight proportions. In order to study the characterization of the composite specimens various test were conducted which include tensile test, Compression test, Flexural test and Water absorption test.. This paper consists of all the literature required, fabrication processes, testing methods and the analysis about the characterization of the fabricated composite

 References

[1] J. Olumuyiwa Agunsoye*, Talabi S. Isaac, Sanni O.Samuel “Study of Mechanical Behaviour of Coconut Shell Reinforced Polymer Matrix Composite” Journal of Minerals and Materials Characterization and Engineering, 2012, 11, 774-779
[2] R.Karthik, S Sathiyamurthy, S Jayabal and K.Chidambaram “TRIBOLOGICAL BEHAVIOUR OF RICE HUSK AND EGG SHELL HYBRID PARTICULATED COIR-POLYESTER COMPOSITES”, (IOSRJMCE) Pg75-80
[3]“Evaluation and Testing of Mechanical properties of wood plastic composite” N. Srivastavaa, V.K. Singhb*, J. Bhaskar, International Journal of thermoplastic composite materials Volume 25 No 4
[4] “ROTATIONAL MOLDING OF NATURAL FIBERS AND POLYETHYLENE COMPOSITE MATERIALS” W.Yan, R.J.T.Lin*, D.Bhattacharyya
[5] K.Naresh “Tensile and flexural strength of glass fiber epoxy composites
[6], V. Krishna[2], D. Srinivas rao[3], International jouranal ,246-249

Keywords
Natural particle reinforced composite, Epoxy resin, Sago starch particles and characterization.