Simulation of Dual Active Bridge Converter for Energy Storage System

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2015 by IJETT Journal
Volume-27 Number-2
Year of Publication : 2015
Authors : Vuppalapati Dinesh, E.Shiva Prasad
  10.14445/22315381/IJETT-V27P213

MLA 

Vuppalapati Dinesh, E.Shiva Prasad"Simulation of Dual Active Bridge Converter for Energy Storage System", International Journal of Engineering Trends and Technology (IJETT), V27(2),79-83 September 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
The increased demand of an intermediate storage of electrical energy in battery systems, in particular due to use of renewable energy, has resulted in the need of dual active bridge converters or bidirectional DC to DC power converters. The most cost effective solution for electrical energy storage is battery. The battery output is converted to AC for connecting to electrical loads. Charging and discharging of the battery can be carried out by bidirectional power converters. DAB converter can be used for battery charging and uninterruptable power supply for hybrid vehicles, telecommunication, industrial, space and defence applications. This thesis investigates different isolated bidirectional DC–DC converters with a rating of voltage 220V, frequency 1 kHz and power of 1600W. Closed loop control blocks for various applications of DAB circuit have been proposed and validated by simulation.

 References

[1] A. Huang, M. Crow, G. Heydt, J. Zheng, and S. Dale, “The Future Renewable Electric Energy Delivery and Management (FREEDM) System: The Energy Internet,”Proceedings of the IEEE, vol. 99, pp. 133–148, Jan. 2011.
[2] F. Krismer, S. Round, and J. Kolar, “Performance optimization of a high current dual active bridge with a wide operating voltage range,” in IEEE Power Electronics Specialists Conference (PESC), 2006, pp. 1–7, Jun. 2006.
[3] H. Qin and J. W. Kimball, “Ac-ac dual active bridge converter for solid state transformer,” in IEEE Energy Conversion Congress and Exposition (ECCE),2009, pp. 3039–3044, 2009.
[4] Kheraluwala, M. N., Randal W. Gascoigne, Deepakraj M. Divan, and Eric D. Baumann. "Performance characterization of a high-power dual active bridge dc-to-dc converter." Industry Applications, IEEE Transactions on 28, no. 6 (1992).
[5] D. Xu, C. Zhao, and H. Fan, “A PWM plus phase-shift control bidirectional dc- dc converter,” IEEE Transactions on Power Electronics, vol. 19, pp. 666–675, Mar. 2004
[6] S. Inoue and H. Akagi, “A bidirectional dc-dc converter for an energy storage system with galvanic isolation,” IEEE Transactions on Power Electronics, vol. 22, pp. 2299–2306, Nov. 2007.
[7] Inoue, S.; Akagi, H. A bidirectional DC TO DC converter for an energy storage system with galvanic isolation. IEEE Trans. Power Electron.2007
[8] D. Xu, C. Zhao, and H. Fan, “A PWM plus phase-shift control bidirectional dc- dc converter,” IEEE Transactions on Power Electronics, vol. 19, pp. 666–675, Mar. 2004

Keywords
Dual Active bridge (DAB) Converter, bidirectional DC–DC converters.