Analysis of Mechanical Properties of Hybrid Composites Experimentally
International Journal of Engineering Trends and Technology (IJETT) | |
|
© 2016 by IJETT Journal | ||
Volume-35 Number-8 |
||
Year of Publication : 2016 | ||
Authors : T.karthikeyan, S.K.Aravindhkumar, P.Sreepathi, N. Shanmuga Prakash |
||
DOI : 10.14445/22315381/IJETT-V35P279 |
Citation
T.karthikeyan, S.K.Aravindhkumar, P.Sreepathi, N. Shanmuga Prakash"Analysis of Mechanical Properties of Hybrid Composites Experimentally", International Journal of Engineering Trends and Technology (IJETT), V35(8),391-396 May 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
Due to increasing environmental concerns natural fibres are once again being considered as reinforcements for polymer composites. This present work evaluated the effect of mechanical properties of hybrid (carbon+flax) fibre reinforced epoxy composites. In this work hybrid (carbon+flax) fibre is used as reinforcement which treated with NaOH solution for enhancing the bonding strength between fibre and resin by removing moisture contents. Samples of hybrid (carbon+flax) fibre reinforced composites were fabricated by compression moulding and investigated their mechanical properties. The work of this experimental study has been carried out to determine the mechanical properties due to the effect of hybrid (carbon+flax) + carbon) fibre with orientations as 00/900 orientation. The results of this study indicate the orientation 00/900 gives better mechanical properties when compared with the other orientations.
References
1. Dario Croccolo and Stefano fini(2015)Mechanical characteristics of two environmental friendly Resin reinforced with flax fibres–Material and design.- Elsevier
2. V.S.Srinivasan , S.RajendraBoopathy, D.Sangeetha (2014),Evaluation of mechanical and thermal properties of banana – flax based natural fibre composites –Material and design.- Elsevier
3. Vieille Benoit , Lefebvre and Coppale Alex (2014),Poot fire behavior of carbon fibresPoluphenylenesulfide- and epoxy based laminates for aeronautical applications– Material and design.- Elsevier
4. E.Mahdi and T.A.Sebaey(2014)Crushing behavior of hybeidhezagonal and octagonal crllular composite system : Aramide / carbon hybrid composite –Material and design.- Elsevier
5. Shaoxiong Liang and Papa BirameGning (2014),quasi behavior and damage assessment of flax eposxy composites–Material and design.- Elsevier
6. YiniziZhuro and Mingkang (2013),Reinforced concrete beams strengthened with carbon fibre reinforced polymer by friction hybrid bond technique : Experimental investigation –Material and design.- Elsevier
7. Libo Yan and NawawiChouw (2013),Compressive and flexural behavior and theroritical analysis of flax fibre reinforced polymer tube encased coir fibre reinforced concrete composite–Material and design.- Elsevier
8. B.A.Muralidhar (2013),Study of Flax hybrid performs reinforced epoxy composites–Material and design.- Elsevier
9. Analysis of Composite Material (Fiber Glass) International Journal of Engineering Trends and Technology (IJETT) ... Created on 07 April 2016
10. M. Mozaffari-Kermani and A. Reyhani- Masoleh, ?A lowpower high performance concurrent fault detection approach for the composite field S-box and inverse Sbox, IEEE Trans. Comput., vol. 60, no. 9, .Created on 09 April 2016
Keywords
Orientations, Composite, Epoxy, Resin; Flax, Carbon, Testing.