Analysis of Causes of Engine Overheating due to Cooling System Failure Using Pareto Principle
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2016 by IJETT Journal | ||
| Volume-36 Number-5 |
||
| Year of Publication : 2016 | ||
| Authors : Gurusaheb Singh Missan, Dr. I. P.Keswani |
||
| DOI : 10.14445/22315381/IJETT-V36P245 |
Citation
Gurusaheb Singh Missan, Dr. I. P.Keswani"Analysis of Causes of Engine Overheating due to Cooling System Failure Using Pareto Principle", International Journal of Engineering Trends and Technology (IJETT), V36(5),242-248 June 2016. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
Cooling system plays an important role to control the temperature of the engine. The overheating of the engine can be prevented by using an efficient cooling system and assists the vehicle running at its optimal performance. The failure of cooling system component results in overheating of an engine. This paper presents the study conducted to find out the causes of engine overheating because of cooling system failure through Pareto analysis, cause and effect diagram is prepared to classify the causes into sub causes and the thermal analysis of the cylinder liner is done using Ansys two different materials gray cast iron and aluminium alloy 6061 were used.
References
[1] Prof. J.A. Doshi, J.D. Kamdar, Prof. S.Y. Jani, Prof. S. J. Chaudhary / “ Root Cause Analysis Using Ishikawa Diagram For Reducing Radiator Rejection” International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 www.ijera.com Vol. 2, Issue 6, November- December 2012, pp.684-689
[2] Gogineni. Prudhvi, Gada.Vinay, G.Suresh Babu ” Cooling Systems in Automobiles & Cars” International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-2, Issue-4, April 2013
[3] Tanu Singhai 1, Abhishek Mishra 2 , Rajiv Saxena 3 , Sanjay Chhalotre 4 “Analysis and Performance of Automobile Engine Components Considering Thermal and Structural Effects” International Journal of Innovative Research in Science,Engineering and Technology (An ISO 3297: 2007 Certified Organization) Vol. 3, Issue 1, January 2014
[4] Quazi Mohd. Jawed Ali ** Dr. Suwarna Torgal “Failure Analysis of Engine over Heating Issues Observed in Vibratory Compactor Powered by Air Cooled Diesel Engine (Part-01)” Indian journal of research Volume : 3 | Issue : 5 | June 2013
[5]Shantkumar.B..Bocharrei “Improving the performance of engine block by varying cooling fluids” Proceeding of NCRIET-2015 & Indian J.Sci.Res. 12(1):408-416, 2015
[6] ken nelson “ engine overheating” Shade tree A’s volume 36 No 7 july 2009
[7]Mohiuddin Ahmed1,*; Nafis Ahmad2 “An Application of Pareto Analysis and Cause-and-Effect Diagram (CED) for Minimizing Rejection of Raw Materials in Lamp Production Process” Management Science and Engineering Vol. 5, No. 3, 2011, pp.87-95 DOI:10.3968/j.mse.1913035X20110503.320
Keywords
Cooling system, cylinder liner, Engine overheating, Thermal analysis, Pareto analysis.