Investigation of design parameter of two wheeler frame through comparative analysis
 |
International Journal of Engineering Trends and Technology (IJETT) | 
|
| © 2017 by IJETT Journal | ||
| Volume-46 Number-4 |
||
| Year of Publication : 2017 | ||
| Authors : Manmohan Singh Thakur, Dr. Suman Sharma |
||
| DOI : 10.14445/22315381/IJETT-V46P234 |
Citation
Manmohan Singh Thakur, Dr. Suman Sharma "Investigation of design parameter of two wheeler frame through comparative analysis", International Journal of Engineering Trends and Technology (IJETT), V46(4),195-198 April 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
Now a day there are mainly two types of
frames developing one is square frame and other is
tubular frame. In this work we will going to be
compared what are the mechanical differences
between a tubular and square (no tubular) frame
and trying to take some conclusions. In this research
we took two materials which are used mainly in two
wheeler frame. That is aluminium and steel. We used
Creo for modelling and ANSYS for analysis.
References
[1] Derek Covilla*, Steven Begga, Eddy Eltona, Mark Milnea,
Richard Morrisa, Tim Katza “Parametric finite element analysis
of bicycle frame geometries” The 2014 conference of the
International Sports Engineering Association.
[2] Jorge E. Rodrigueztx,And& L. Medaglia` ,Juan P. Casas`,
“Approximation to the optimum design of a motorcycle frame
using finite element analysis and evolutionary algorithm”.
[3] Mohd. Khairudin Bin Yaha “Simulatednstress and finite
element analysis based of Suzuki FXR 150cc Motorcycle chassis”.
[4] Dario Croccolo* ? Massimiliano De Agostinis ?
NicolòVincenzi “Structural Analysis of an Articulated Urban Bus
Chassis via FEM: a Methodology Applied to a Case Study”
Strojniškivestnik - Journal of Mechanical Engineering
57(2011)11, 799-809
[5] Prof. M.Sc. Boži? S.1, Prof.Gomba? E.2, Prof.Harmel A.3
“Redesign of motorcycle rear suspension with CAD technology”
[6] Maulik Lohia, Prof. Mohsin Bukhari, Prof. Mit Patel
“Review Paper on Bike Chassis for Stability of Rider by
Ergonomic”Research article IJESC (Volume 6 Issue No. 12)
[7]. D.Kondayya, “3-Dimensional FE Analysis and
Optimization of Bike Structure’’, International Journal of
Engineering Research, Volume No.5 Issue: Special 2, pp: 308-
311.
[8]. Aparna Deshpande, Amol B. Gaikwad, “Design and
Optimization of Bicycle Frame for the Cyclist`s Comfort’’,
International Journal on Recent and Innovation Trends in
Computing and Communication, Volume: 4 Issue: 5,220 - 224.
[9]. Gaurav Vasantrao Bhunte and Dr. Tushar R. Deshmukh,
“A Review on Design and Analysis of Two Wheeler Chassis’’,
International Journal For Research In Emerging Science And
Technology, Volume-2, Issue-1, January-2015.
[10]. Bhagyashri Adake, Dr. A. D. Desai, H. S. Bawiskar,
“Cost and Structural Optimisation of Modular Bicycle Frame”,
International Journal of Science, Engineering and Technology
Research (IJSETR), Volume 4, Issue 10, October 2015.
[11]. Lakshmi Srinivas.G, BSV Ramarao, M. Aditya Seshu, V.
Gurushanker, “Design And Manufacture Of Composite Bicycle
Frame And Evaluation Of Compressive Properties Of ±450 EGlass/
Epoxy Composite With Different Introduced Defects’’,
International Journal of Science, Engineering and Technology
Research (IJSETR), Volume 4, Issue 8, August-2015.
[12]. Mohammad A Bukhari Marzuki, Mohammad Hadi Abd
Halim and Abdul Razak Naina Mohamed, “Determination of
Natural Frequencies through Modal and Harmonic Analysis of
Space Frame Race Car Chassis Based on ANSYS’’, American
Journal of Engineering and Applied Sciences.
[13]. V. Terzic, S. A. Mahin and M. C. Comerio,
“Comparative Life-Cycle Cost And Performance Analysis Of
Structural Systems For Buildings’’, Proceedings of the 10th
National Conference in Earthquake Engineering, Earthquake
Engineering Research Institute, Anchorage, AK, 2014.
[14]. Sagar Pardeshi, Pankaj Desle, “Design and Development
of Effective Low Weight Racing Bicycle Frame’’, International
Journal of Innovative Research in Science, Engineering and
Technology, Vol. 3, Issue 12, December 2014.
[15]. Derek Covilla, Steven Begga, Eddy Eltona, Mark Milnea,
Richard Morrisa, Tim Katza, “Parametric finite element analysis
of bicycle frame geometries’’, Procedia Engineering 72 ( 2014 )
441 – 446.
Keywords
We used
Creo for modelling and ANSYS for analysis.