Assessment For Use Of Gravel In Pervious Concrete
International Journal of Engineering Trends and Technology (IJETT) | |
|
© 2013 by IJETT Journal | ||
Volume-4 Issue-10 |
||
Year of Publication : 2013 | ||
Authors : Darshan S. Shah , Prof. Jayeshkumar Pitroda |
Citation
Darshan S. Shah , Prof. Jayeshkumar Pitroda. "Assessment For Use Of Gravel In Pervious Concrete". International Journal of Engineering Trends and Technology (IJETT). V4(10):4306-4310 Oct 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.
Abstract
Gravel is an important commercial product, with a number of applications. Many roadways are surfaced with gravel, especially in rural areas where there is little traffic or less wheel load. Globally, so many roads are surfaced with gravel, which are used in concrete especially in Russia, which covers 4,00,000 km of gravel roads. Gravel is formed as a result of the Weathering and Erosion of the rocks. Gravel is an alternate material in place of the aggregate which in turn used for making concrete when it is properly mixed with cement and water. Gravel is used for making a special concrete like “Pervious Concrete” and for that purpose, specially 3/4 inch (18.75 mm) and 3/8 inch (9.375 mm) gravel has been taken. For obtaining these two types of gravel from the available quantity sieve analysis has been carried out. Specific gravity, Water absorption and bulk density of gravel is also found out. Gravel becoming compacted and concreted into sedimentary rock called as a conglomerate. Mostly gravel is produced by quarrying and crushing hard-wearing rocks, such as sandstone, limestone, or basalt. Quarries where gravel is extracted are known as gravel pits.
References
[1] Crouch, L. K., Pitt, J., and Hewitt, R. (2007). “Aggregate Effects on Pervious Portland Cement Concrete Static Modulus of Elasticity.” J. Mater. Civ. Eng. 19(7), 561-568.
[2] Ghafoori, N., and Dutta, S., “Building and Non pavement Applications of No- Fines Concrete,” Journal of Materials in Civil Engineering, Volume 7, Number 4, November 1995, pgs. 286-289.
[3] Montes, F., Valavala, S., and Haselbach, L.M. “A New Test Method for Porosity Measurements of Portland Cement Pervious Concrete,” Journal of ASTM International, Vol. 2, No 1, January 2005, pp.13.
[4] S.O. Ajamu, A.A. Jimoh, J.R. Oluremi (2012), “Evaluation of The Structural Performance of Pervious Concrete in Construction” International Journal of Engineering and Technology Volume 2 No. 5, May, 2012.
[5] Richard c Meininger, “ No Fines Pervious Concrete for Paving,” Concrete Intenational Vol. 10, No. 8, August 1988, pp. 20-27.
[6] Rushton B., “Infiltration Opportunities in Parking-Lot Design Reduce Runoff and Pollution”, Storm water, 2002.
Keywords
Gravel, weathering, erosion, pervious concrete, sieve analysis, specific gravity, water absorption, bulk density, gravel pits, sedimentary, conglomerate