Design Of Real Time Interactive Data Acquisition And Control System Using ARM9

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-10                      
Year of Publication : 2013
Authors : S.P Rahul Santosh , K. Somasekhara Rao

Citation 

S.P Rahul Santosh , K. Somasekhara Rao . "Design Of Real Time Interactive Data Acquisition And Control System Using ARM9". International Journal of Engineering Trends and Technology (IJETT). V4(10):4418-4421 Oct 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.

Abstract

A web server is a system which hosts a web site and provides services for any requesting clients. The general purpose web servers compose of an operating system, the web pages or the application and a huge amount of memory and sometimes a special hardware. The central function unit to get access on an embedded system via Web browser is the Web server. Digital acquisition is done by special ADC. The measured data are stored in external memory in which the memory acts as a data base during web server mode. The ARM processor directly supports the Ethernet service and RS232 communication. Hence the data has been stored and controlled by some other PCs or network via RS232 & Ethernet. ARM processor has internal I2C module. So it has the ability to communicate with any other peripherals. This system has LCD to display the information and measured parameters which makes the debugging and modification of the parameter easy. The Analog to digital interfacing module is independent with the embedded system, which is beneficial to the system maintenance and upgrade. As the embedded Ethernet interface makes the remote data exchange between the applications become very easy. Here we measure the remote signals and can control the remote devices through reliable protocols and communication network. The embedded web server is interfaced to the appliances and the sensors through the controller and it is via the embedded web server that we can control the appliances and monitor the sensors.

References

[1] S.Li,Jiarong, R.Luo, YichunC.Wu, GuimingM.Li, FengWang, and YongWang. “Continuous and Real-Time Data Acquisition Embedded System for EAST”, IEEE Trans. Nuclear science,Vol.57,No.2, pp. 696-699, April 2010.
[2] E.Siever, A.Weber, S.Figgins, and R.Love, CA:O’Reilly, “Linux in a Nutshell,”,2005.
[3] Clyde C. W. Robson, Samuel Silverstein, and Christian Bohm ,”An Operation-Server Based Data Acquisition System Architecture,” IEEE Trans. Nuclear science, Vol. 55, No. 1, February 2008.
[4] J. E. Marca, C. R. Rindt, M. Mcnally, and S. T. Doherty, “A GPS enhanced in-vehicle extensible data collection unit,” Inst. Transp. Studies, Univ. California, Irvine, CA, Uci-Its-As-Wp-00-9, 2000.
[5] Y. C.Wu, J. R. Luo, and J. Z. Shan, “Development of the central timing system on the EAST Tokamak,” IEEE Trans. Nuclear science, Vol. 30, No. 9, pp. 789–792, 2007.
[6] S. B. Silverstein, J. Rosenqvist, and C. Bohm, “A simple Linux-based platform for rapid prototyping of experimental control systems,” IEEE Trans. Nucl. Sci., vol. 53, no. 3, pp. 927–929, Jun. 2006.
[7] RTLinux – http://www.rtlinux.org
[8] www.opensource.org
[9] www.embeddedarm.com

Keywords
Embedded ARM9 Processor, Real Time Linux Operating system (RTLinux RTOS), Embedded web server, Interactive data acquisition and control system (IDACS).