Elimination of Harmonics Using Active Power Filter Based on DQ Reference Frame Theory

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-4                       
Year of Publication : 2013
Authors : M.SUNITHA , B. N . KARTHEEK

Citation 

M.SUNITHA , B. N . KARTHEEK. "Elimination of Harmonics Using Active Power Filter Based on DQ Reference Frame Theory". International Journal of Engineering Trends and Technology (IJETT). V4(4):781-785 Apr 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract

Active power filters have the following multiple functions; harmonic filtering, damping, isolation and t ermination, reactive - power control for power factor correction and voltage regulation, load balancing, voltage - flicker reduction, and/or their combinations. Significant cost reductions in both power semiconductor devices and signal - processing devices have inspired manufactures to put active filters on the market. This paper presents a method for obtaining the desired reference current for Voltage Source Converter (VSC) of the Shunt Active Power Filter (SAPF) using Synchronous Reference Frame Theory. The met hod relies on the performance of the Proportional - Integral (PI) controller for obtaining the best control performance of the SAPF. Using Reference Frame Transformation, reference signals are transformed from a ? b ? c stationery frame to 0 ? d ? q rotating fra me. Using the PI controller, the reference signals in the 0 ? d – q rotating frame are controlled to get the desired reference signals for the Pulse Width Modulation

References

1. Boon Teck Ooi, “Advanced Distribution to Deliver Custom Power”, Electric Power Research Institute, Inc. (EPRI), 1991.
2. C. Qiao, K. M. Smedley, “Three - ph ase Active Power Filters with Unified Constant - frequency Integration control”,www.eng.uci.edu/~smedley/IPEMC - A185.PDF.
3. C. Collombet, J. Lupin, J. Schonek, (1999), Harmonic disturbances in networks, and their treatment, Schneider Electric’s “Collection Tec hnique”, Cahier technique no.152, http://www.schneiderelectric.com/cahier_technique/en/pdf/ect202.pd f. Available online.
4. U. Abdurrahman, R. Annette, L. S. Virginia, “A DSP Controlled Resonant Filter for Power Conditioning in Three - Phase Industrial Power’’ , System. Signal Processing, Volume 82, Issue 11,November 2002, pp 1743 - 1752.
5. P. Fabiana, Pottker and B. Ivo, “Single - Phase Active Power Filters for Distributed Power Factor Correction”, PESC 2000.
6. H.J. Gu, and H.C. Gyu, “New active power filter with sim ple low cost structure without tuned filters”, 29th Annual IEEE Power Electronics Specialists Conference, Vol.1, pp 217 - 222, 1998.
7. F. Hideaki, Y. Takahiro, and A. Hirofumi , “A hybrid Active Filter for Damping of Harmonic Resonance in Industrial Power Sys tem”, 29th Annual IEEE Power Electronics Specialists Conference, pp209 - 216 1998

Keywords
Pulse Width Modulation (PWM), Shunt Active Power Filter (SAPF), Voltage Sourc e Converter (VSC).