Analysis of Composite Drum Brake Using FEA Approach
 |
International Journal of Engineering Trends and Technology (IJETT) | 
|
| © 2013 by IJETT Journal | ||
| Volume-4 Issue-8 |
||
| Year of Publication : 2013 | ||
| Authors : Simon George , Arun LR , Guru Prasad BS |
Citation
Simon George , Arun LR , Guru Prasad BS. "Analysis of Composite Drum Brake Using FEA Approach". International Journal of Engineering Trends and Technology (IJETT). V4(8):3398-3402 Jul 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.
Abstract
The modern development in the field of material technology gave rose to hybrid materials such as composites that paved the way for engineers to explore the possibility of substitute material which can perform efficiently and effectively than co nventional materials. For the Engineering applications such as Automotive and Aerospace are the prima - feci in such applications. The present work is concentrated on the development of a particulate reinforced composite material for an automobile brakedrum in place of conventional material such as cast iron and aluminum alloys are heavier and can be replace by light weight aluminium hybrid composites . Al6061 with 9% Sic and 15 % fly ash is used to develop the composite by vortex casting. It is observed tha t this composition has enhanced mechanical and physical properties and FEA analysis shows the projected improvement which enables it to be used in practical application such as drum brakes
References
[1] K Radhakrishna, hardness and wear characteristics of Al - 4.5%CU (LM11) alloy and fly ash composite (AMC), prof of BMS college of eng i neering, june 2008.
[2] Beinias, microstructure and corrosio n behaviour of alum i nium fly ash composites, dept of materials engineering, lublin university of technology, Poland, 2008
[3] Sudarshan, M.K. Surappa, Dry sliding wear of fly ash particle reinfo r cedA356 Al composites, Wear 265 (2008): pp 349 – 360
[4] S. C. Mishra, Aluminum – fly ash composite produced by impeller mi x ing, Journal of reinforced plastics and composites,(2008):pp1 - 6
[5] Ganesan Pandi, Saravanan Muthusamy “A review on m a chining and tribological behaviours of aluminium hybrid composites”, Procedia Eng i neering 38 (2012) 1399 - 1408, ELSEVIER
[6] G Rajesh Babu, N Amar Nageswara Rao, “Static and modal analysis of rear axle housing of a truck”, International Journal of Mathematical sciences, Technology and Humanities 7 (2011) 69 - 76.
[7] Muhammad najib bi n abdul hamid[6] Thesis on “a study on the effect of out - of - roundness of drum brakerotor on the braking force using the finite element method” Universiti Sains Malaysia”
[8] Nam Ho Kim Finite element analysis and experiments of me t al/metal wear in oscil latory contacts, Wear 258 (2005) 1787 – 1793 - Elsevier
Keywords
Drum Break, Brakedrum, Alumini um hybrid composites, SiC , Fly ash, Ansys