Static Analysis Of Tractor Trolley Axle

  ijett-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
  
© 2013 by IJETT Journal
Volume-4 Issue-9                      
Year of Publication : 2013
Authors : P.Manasa , Dr.C.Vijaya Bhaskar Reddy

Citation 

P.Manasa , Dr.C.Vijaya Bhaskar Reddy. "Static Analysis Of Tractor Trolley Axle". International Journal of Engineering Trends and Technology (IJETT). V4(9):4183-4187 Sep 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group.

Abstract

This paper deals with static analysis of tractor trolley axle. In India tractor trolley (or) trailers are very popular and che aper mode for transport of goods and in rural as well as urban areas. Especially various small scale industries are adopting the crude methodologies for designing and manufacturing machine compo nents. One such industry producing tractor trolleys for agricultural use has been identified for this study. Most of the tractor trolley axle used today is rectangular cross section type which in turn leads to increase in the weight of tractor trolley and axle. The soli d modeling of axle is developed by CATIA - V5. Analysis is done using ANSYS work bench. In paper an attempt has made by replacing rectangular cr oss section with circular section. Further static analysis is done to determine von - misses stress, equivalent elastic strain, maximum shear stress, total deformation. Finally the results of rectangular section axle with circular section axle are compared which result in reducing the 20% weight of the circular axle.

References

[1]. H. V. Katore, S. B. Jaju, “ Redesigning of Tractor - Trolley Axle using ANSYS,”International Journal of Engineering Science and Technology (IJEST), vol.3, pp. 4702 - 4710, June2011.
[2]. MajidKhanali, Ali Jafari, HosseinMobliand Ali Rajabipour “Analysis and design optimization of a frontal combine harvester axle using finite element and experimental methods “Journal of food, Agriculture , &Enviournmental,WFL Publisher, Vol 8(2) pp. 359 - 364, 2010.
[3]. Happy Bansal , Sunil Kumar, “ Weight Reduction and Analysis of Trolley Axle UsingAnsys”, International Journal of Engineering and Management Research, Vol. - 2, Issue - 6, Pages: 32 - 36, December 2012.
[4]. Sanjay Aloni, Sandip Khedkar,“Comparative E valuation of Tractor Trolley Axle by Using Finite Element Analysis Approach “International Journal of Engineering Science and Technology (IJEST). Vol4. No.4 pp - 1351 - 1360, April 2012
[5]. http://en.wikipedia.org .
[6]. R.S. Khurmi“ Strength of material”.
[7]. R.S. Khurmi and Gupta” Theory of Machine”.

Keywords
ANSYS Workbench, CATIAV5 , Static Analysis .