A Novel Soft-Switching Based Closed Loop KY Converter with Ripple-Free Current
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2018 by IJETT Journal | ||
| Volume-56 Number-1 |
||
| Year of Publication : 2018 | ||
| Authors : SK. Saidalli, B. Seshagiri, V.S.N. Narasimha Raju |
||
| DOI : 10.14445/22315381/IJETT-V56P209 |
Citation
SK. Saidalli, B. Seshagiri, V.S.N. Narasimha Raju "A Novel Soft-Switching Based Closed Loop KY Converter with Ripple-Free Current", International Journal of Engineering Trends and Technology (IJETT), V56(1),46-53 February 2018. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
A soft-switching based closed loop KY converter with ripple-free output current is proposed. This converter is based on a voltage boosting converter, named KY converter. Initially the basic function of traditional KY boost converter with soft switching and also output current ripples is discussed. It is achieved by utilizing an auxiliary circuit to the KY boost converter, the zero-voltage-switching (ZVS) of power switches is achieved. Moreover, the auxiliary circuit cancels out the filter inductor current ripple. Then, ripple-free output current is achieved. For the improvement of the functionality of the KY boost converter the PI controller in voltage mode control path is used. Finally the output response of conventional boost converter and KY boost converter in open loop and closed loop of the methods are compared. A comparison study was conducted to characterize the output voltage ripple percentage, output current ripple percentage and switching losses of each switch in the converter. The switching loss is reduced and the system efficiency is improved. The operational principle and a steady-state analysis of the closed loop KY boost converter are provided in detail.
Reference
[1] Se-jin kim and hyun-lark do. “Soft-switching step-up converter with ripple-free output current.” IEEE Trans. Power Electron.
[2] K. I. Hwu and Y. T. Yau, “KY converter and its derivatives,” IEEE Trans. Power Electron., vol. 24, no. 1, pp. 128–137, Jan. 2009.
[3] B.M Hasaneen, Adel A.Elbaset Mohammed. “Design and simulation of DC/DC boost converter” IEEE Trans. Power Electron.
[4] Yeong-Chin Chen, Cheng-I Chen, Zhen-Ting Shao, ”A DC-DC boost converter with high voltage gain for distributed generation”. IEEE Trans. Power Electron.
[5] S. Dwari and L. Parsa, “An efficient high-step-up interleaved DC–DC converter with a common active clamp,” IEEE Trans. Power Electron., vol. 26, no. 1, pp. 66–78, Jan. 2011.
[6] H. B. Shin, J. G. Park, S. K. Chung, H. W. Lee, and T. A. Lipo, “Gen-eralized steady-state analysis of multiphase interleaved boost converter with coupled inductors,” IEE Proc. Electr. Power Appl., vol. 152, no. 3, pp. 584–594, May 2005.
[7] R. Giral, E. Arango, J. Calvente, and L. Martinez-Salamero, “Inherent DCM operation of the asymmetrical interleaved dual buck-boost,” in Proc. 28th IEEE Ind. Electron. Soc., 2002, vol. 1, pp. 129–134.
[8] C.-P. Ku, D. Chen, C.-S. Huang, and C.-Y. Liu, “A novel SFVM-M3 control scheme for interleaved CCM/DCM boundary-mode boost con-verter in PFC applications,” IEEE Trans. Power Electron., vol. 26, no. 8, pp. 2295–2303, Aug. 2011.
[9] W. C. Cheng and C. L. Chen, “Optimal lowest-voltage-switching for boundary mode power factor correction converters,” IEEE Trans. Power Electron., vol. 30, no. 2, pp. 1042–1049, Feb. 2015.
[10] H. S. Choi and L. Balogh, “A cross-coupled master–slave interleaving method for boundary conduction mode (BCM) PFC converters,” IEEE Trans. Power Electron., vol. 27, no. 10, pp. 4202–4211, Oct. 2012.
[11] N. Altintas, A. F. Bakan, and I. Aksoy, “A novel ZVT-ZCT-PWM boost converter,” IEEE Trans. Power Electron., vol. 29, no. 1, pp. 256–265, Jan. 2014.
[12] B. Akin, “An improved ZVT–ZCT PWM DC–DC boost converter with increased efficiency,” IEEE Trans. Power Electron., vol. 29, no. 4,1919–1926, Apr. 2014.
[13] P. Das, S. A. Mousavi, and G. Moschopoulos, “Analysis and design of nonisolated bidirectional ZVS-PWM DC–DC converter with coupled inductors,” IEEE Trans. Power Electron., vol. 25, no. 10, pp. 2630–2641, Oct. 2010.
[14] H. Bodur, S. Cetin, and G. Yanik, “A new zero-voltage transition pulse width modulated boost converter,” IET Power Electron., vol. 4, no. 7, 827–834, Aug. 2011
[15] R. N. Alencar Leao˜ e Silva Aquino, F. Lessa Tofoli, P. Peixoto Praca, D. de Souza Oliveira Jr., and L. H. Silva Colado Barreto, “Soft switching high-voltage gain DC–DC interleaved boost converter,” IET Power Electron., vol. 8, no. 1, pp. 120–129, Jan. 2015.
[16] W. Li, X. Xiang, C. Li, W. Li, and X. He, “Interleaved high step-up ZVT converter with built-in transformer voltage doubler cell for distributed PV generation system,” IEEE Trans. Power Electron., vol. 28, no. 1, pp. 300–313, Jan. 2013.
[17] S. H. Lee, P. S. Kim, and S. W. Choi, “High step-up soft-switched converters using voltage multiplier cells,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3379–3387, Jul. 2013.
[18] J. J. Lee, J. M. Kwon, E. H. Kim, and B. H. Kwon, “Dual series-resonant active-clamp converter,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 699–710, Feb. 2008.
[19] J. Y. Lin, W. Z. Tzeng, H. Y. Lin, C. F. Wang, and P. J. Liu, “Active-clamping forward converter with non-linear step-down conversion,” IET Power Electron., vol. 8, no. 1, pp. 112–119, Jan. 2015.
[20] Y. Hu, W. Xiao, W. Li, and X. He, “Three-phase interleaved high-step-up converter with coupled-inductor-based voltage quadrupler,” IET Power Electron., vol. 7, no. 7, pp. 1841–1849, Jul. 2014.
[21] Y. H. Park, B. K. Jung, and S. W. Choi, “Nonisolated ZVZCS resonant PWM DC–DC converter for high step-up and high-power applications,” IEEE Trans. Power Electron., vol. 27, no. 8, pp. 3568–3575, Aug. 2012.
[22] X. Zhang, L. Jiang, J. Deng, S. Li, and Z. Chen, “Analysis and design of a new soft-switching boost converter with a coupled inductor,” IEEE Trans. Power Electron., vol. 29, no. 8, pp. 4270–4277, Aug. 2014.
[23] B. R. Lin and B. R. Hou, “Analysis and implementation of a zero-voltage switching pulse-width modulation resonant converter,” IET Power Elec-tron., vol. 7, no. 1, pp. 148–156, Jan. 2014.
[24] T. Zhan, Y. Zhang, J. Nie, Y. Zhang, and Z. Zhao, “A novel soft-switching boost converter with magnetically coupled resonant snubber,” IEEE Trans. Power Electron., vol. 29, no. 11, pp. 5680–5687, Nov. 2014.
[25] M. R. Mohammadi and H. Farzanehfard, “New family of zero-voltage-transition PWM bidirectional converters with coupled inductors,” IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 912–919, Feb. 2012.
[26] Y. Zhang, P.C. Sen, and Y.-F. Liu, “A novel zero voltage switched (ZVS) buck converter using coupled inductor,” in Proc. Elect. Comput. Eng. Can. Conf., May 2001, vol. 1, pp. 357–362.
[27] R. S. Balog and P. T. Krein, “Coupled-inductor filter: A basic filter building block,” IEEE Trans. Power Electron., vol. 28, no. 1, pp. 537–546, Jan. 2013.
keywords
KY converter, soft-switching, conventional boost converter, ripples free.