Modelling Surface Finish in Wire Electrical Discharge Machining of 9CrSi Tool Steel
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2018 by IJETT Journal | ||
| Volume-61 Number-2 |
||
| Year of Publication : 2018 | ||
| Authors : Tran Anh Duc, Nguyen Manh Cuong, Luu Anh Tung, Le Xuan Hung, Vu Ngoc Pi |
||
| DOI : 10.14445/22315381/IJETT-V61P212 |
Citation
MLA Style: Tran Anh Duc, Nguyen Manh Cuong, Luu Anh Tung, Le Xuan Hung, Vu Ngoc Pi "Modelling Surface Finish in Wire Electrical Discharge Machining of 9CrSi Tool Steel" International Journal of Engineering Trends and Technology 61.2 (2018): 72-74.
APA Style:Tran Anh Duc, Nguyen Manh Cuong, Luu Anh Tung, Le Xuan Hung, Vu Ngoc Pi, (2018). Modelling Surface Finish in Wire Electrical Discharge Machining of 9CrSi Tool Steel. International Journal of Engineering Trends and Technology, 61(2), 72-74.
Abstract
This paper presents a study on modelling surface finish in Wire Electrical Discharge Machining of 9CrSi tool steel. In the study, experiments were conducted based on full factorial design and the work-piece material was 9CrSi steel. A total of 32 experiments were conducted. The input parameters including cutting voltage, pulse on time, pulse off time,servervoltage, wire feed and cutting speed were selected. The effect of input parameters on the surface roughness were investigated by analysing variance. Furthermore, based on the results of the experiments, a regression equation for determining the surface roughness is proposed.
Reference
[1] M. Durairaj, D. Sudharsun, N. Swamynathan, Analysis of Process Parameters in Wire EDM with Stainless Steel Using Single Objective Taguchi Method and Multi Objective Grey Relational Grade, Procedia Engineering, Volume 64, 2013, Pages 868-877.
[2] G. Ugrasen, H.V. Ravindra, G.V. Naveen Prakash, R. Keshavamurthy, Process Optimization and Estimation of Machining Performances Using Artificial Neural Network in Wire EDM, Procedia Materials Science, Volume 6, 2014, Pages 1752-1760.
[3] Parameswara Rao, M Sarcar, Evaluation of optimal parameters for machining brass with wire cut EDM, Journal of Scientific & Industrial Research, Vol. 68, January 2009, pp. 32-34.
[4] Basil Kuriachen, Josephkunju Paul, Jose Mathew, Modeling of Wire Electrical Discharge Machining Parameters Using Titanium Alloy (Ti-6AL-4V), International Journal of Emerging Technology and Advanced Engineering, Volume 2, Issue 4, April 2012.
[5] M. Panner Selvam, P. Ranjith Kumar, Optimization Kerf Width and Surface Roughness in Wirecut Electrical Discharge Machining Using Brass Wire, Mechanics and Mechanical Engineering, Vol. 21, No. 1 (2017) 37–55.
[6] Anurag Joshi, Wire cut edm process limitations for tool and die steel, International Journal of Technical Research and Applications, Volume 2, Special Issue 1 (July-Aug 2014), PP. 65-68.
[7] F. Klocke, D. Welling, A. Klink, D. Veselovac, R. Perez, Evaluation of Advanced Wire-EDM Capabilities for the Manufacture of Fir Tree Slots in Inconel 718, Procedia CIRP, Volume 14, 2014, Pages 430-435.
[8] D. Amrish Raj, T. Senthilvelan, Empirical Modelling and Optimization of Process Parameters of machining Titanium alloy by Wire-EDM using RSM, Materials Today: Proceedings, Volume 2, Issues 4–5, 2015, Pages 1682-1690.
Keywords
WEDM, Surface Roughness, Full Factorial Design, tool steel machining.