IJBTT

Performance Analysis of Data Transmission Device In Wireless Sensor Network

	International Journal of Engineering Trends and Technology (IJETT)
	© 2020 by IJETT Journal
	Volume-68 Issue-3
	Year of Publication : 2020
	Authors : A.B. Primawan
	DOI :  10.14445/22315381/IJETT-V68I3P201S

Citation 

MLA Style: A.B. Primawan  "Performance Analysis of Data Transmission Device In Wireless Sensor Network" International Journal of Engineering Trends and Technology 68.3(2020):1-5.

APA Style:A.B. Primawan. Performance Analysis of Data Transmission Device In Wireless Sensor Network  International Journal of Engineering Trends and Technology, 68(3),1-5.

Abstract
One of which study of wireless sensor networks is the quality of data transmission. The quality of data transmission on a wireless transmission system is greatly influenced by the characteristics of the data transmission method. Apart from that the sensor network topology will affect the mechanism of data transmission both data transmission between sensor points (sensor nodes) and sending data from sensor points to the central point (gateway node). So that the selection of sensor system devices and the ability to live (life time) is an interesting study for further investigation. Apart from that, the sensor placement scenario also affects the quality of data transmission.

This research implements several sensor network scenarios on two methods of data transmission i.e. standard Radio Frequency (RF24) and WiFi (ESP8266). The quality of data transmission will be measured based on the time delay (delay transmission) and the use of power (power consumption) on each sensor device that is connected in a sensor network. The results of the implementation that have been carried out are the assembly and programming of Gateway devices and sensor nodes each of 1 (one) and 4 (four) pieces. Next install the devices into a temperature sensor network. The network will be created using a mesh topology (tree and star). The results of testing the device show that the device has been able to work well to measure and send data from the node to the gateway.

The results of power and time delay measurements from several pre-designed network scenarios show a large decrease in power at the gateway device compared to the sensor node. Meanwhile the transmission delay is greatly influenced by the data sending algorithm.

Reference

[1] C. R. Okpara, V. E. Idigo, and S. M. Oguchienti, “Wireless Sensor Networks for Environmental Monitoring : A Review,” Int. J. Eng. Trends Technol., vol. 68, no. 1, pp. 68–71, 2020.
[2] M. Mangin, A. Valade, A. Costes, A. Bouillod, and P. Acco, “An Instrumented Glove for Swimming Performance Monitoring,” in Proceedings of the 3rd International Congress on Sport Sciences Research and Technology Support, 2015, no. January.
[3] A. Faustine, A. N. Mvuma, H. J. Mongi, M. C. Gabriel, A. J. Tenge, and S. B. Kucel, “Wireless Sensor Networks for Water Quality Monitoring and Control within Lake Victoria Basin: Prototype Development,” Wirel. Sens. Netw., vol. 6, pp. 281–290, 2014.
[4] G. Padmavathi, D. Shanmugapriya, and M. Kalaivani, “A Study on Vehicle Detection and Tracking Using Wireless Sensor Networks,” Wirel. Sens. Netw., vol. 2, no. February, pp. 173–185, 2010.
[5] U. J. Shorina, R. Primananda, and R. Maulana, “Analisis Kinerja Pengiriman Data Modul Transceiver NRF24l01, Xbee dan Wifi ESP8266 Pada Wireless Sensor Network,” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2, no. 4, pp. 1510–1517, 2018.
[6] X. Gong, J. Trogh, Q. Braet, E. Tanghe, P. Singh, and D. Plets, “Measurement-based wireless network planning, monitoring , and reconfiguration solution for robust radio communications in indoor factories Measurement-based wireless network planning, monitoring , and reconfiguration solution for robust radio communicat,” IET Sci. Meas. Technol., no. July, pp. 1–8, 2016.
[7] N. Zhu and A. V Vasilakos, “A generic framework for energy evaluation on wireless sensor networks,” Wirel. Networks, 2015.
[8] A. H. Mohajerzadeh and M. H. Yaghmaee, “Tree Based Energy and Congestion Aware Routing Protocol for Wireless Sensor Networks,” Wirel. Sens. Netw., no. February, pp. 161–167, 2010.
[9] D. Kumar, “Performance analysis of energy efficient clustering protocols for maximising lifetime of wireless sensor networks,” IET Wirel. Sens. Syst., vol. 4, no. 1, pp. 9–16, 2013.
[10] Z. Zhao, G.-H. Yang, Q. Liu, V. O. K. Li, and L. Cui, “Implementation and application of a multi-radio wireless sensor networks testbed,” IET Wirel. Sens. Syst., vol. 1, no. 4, pp. 191–199, 2011.
[11] J. Yick, B. Mukherjee, and D. Ghosal, “Wireless sensor network survey,” Comput. Networks, 2008.
[12] A. A. Chandra, Y. Lee, B. M. Kim, S. Y. Maeng, S. H. Park, and S. R. Lee, “Review on sensor cloud and its integration with arduino based sensor network,” in International Conference on IT Convergence and Security, ICITCS 2013, 2013.
[13] nRF24L01+ Datasheet, Nordic Semiconductor, 2008.
[14] ESP8266EX Datasheet, E. S. I. Team, 2016.
[15] C. Bell, Beginning Sensor Networks with Arduino and Raspberry Pi. Berkeley, CA: Apress, 2013.
[16] V. Prasad et al., “ANDES: An Analysis-Based Design Tool for Wireless Sensor Networks,” 28th IEEE Int. Real-Time Syst. Symp. (RTSS 2007), pp. 203–213, Dec. 2007.
[17] T. Hanisadewa, T. Y. Viananta, and A. B. Primawan, “Unjuk Kerja Jaringan Sensor Nirkabel Dengan Topologi Star,” in Seminar Nasional Sains Teknologi dan Inovasi Indonesia, 2019, vol. 1, no. 1, pp. 1–8.

Keywords
transmissions delay time, power usage, wireless sensor network.