IJBTT

Design, Modelling, and Thermal Analysis of Hot Piston of IC Engine using Ansys Workbench 2021 R2

Design, Modelling, and Thermal Analysis of Hot Piston of IC Engine using Ansys Workbench 2021 R2
	© 2021 by IJETT Journal
	Volume-69 Issue-10
	Year of Publication : 2021
	Authors : Raveena R, Rajasekar V, Lakshminarayanan P R
	DOI :  10.14445/22315381/IJETT-V69I10P228

How to Cite?

Raveena R, Rajasekar V, Lakshminarayanan P R, "Design, Modelling, and Thermal Analysis of Hot Piston of IC Engine using Ansys Workbench 2021 R2," International Journal of Engineering Trends and Technology, vol. 69, no. 10, pp. 217-226, 2021. Crossref, https://doi.org/10.14445/22315381/IJETT-V69I10P228

Abstract
A Novel idea was thought to improve the efficiency of a single-cylinder diesel engine twofold. In this design, a hot piston is mounted over the conventional piston, and firing is shifted over the hot piston. The hot piston is planned to be fabricated out of SS304 grade stainless steel material. No lubricant oil is made available between the hot piston and hot cylinder, and a very close gap is maintained between them. The hot piston is fabricated, and its design is unique. The parametric 3D model is created in AUTODESK Inventor Professional 2019 Version Software. Temperature distribution and heat dissipation were analyzed using ANSYS Workbench 2021 R2 Software and compared. The relevant study information is dealt with here.

Keywords
Hot Piston, SS304 Stainless Steel, Temperature distribution, Heat dissipation, Transient thermal.

Reference
[1] Dincer, I. and Rosen, M.A., Exergy: energy, environment and sustainable development. Newnes.(2012).
[2] Roberts, A., Brooks, R. and Shipway, P., Internal combustion engine cold-start efficiency: A review of the problem, causes, and potential solutions. Energy Conversion and Management, (82 (2014) 327-350.
[3] Gingrich, E., Ghandhi, J. and Reitz, R. Experimental investigation of piston heat transfer in a light-duty engine under conventional diesel, homogeneous charge compression ignition, and reactivity controlled compression ignition combustion regimes. SAE International Journal of Engines, 7(1) (2014) 375-386.
[4] Kuppast, Vinay V., S. N. Kurbet, H. D. Umeshkumar, and Adarsh BC. Thermal Analysis of Piston for the Influence on Secondary motion. International Journal of Engineering Research and Applications (IJERA) ISSN (2013): 2248-9622.
[5] Hongyuan Zhang, Jian Xing, Chang Guo, Thermal analysis of diesel engine Piston, Journal of Chemical and Pharmaceutical Research. 5(9) (2013) 388- 398.
[6] Preethi Kumari, Anamika, Dr.H.C. Thakur, Thermal analysis of piston of IC Engine, International Journal of Scientific Engineering Research. 7(12) (2016).
[7] K.S.Mahajan, S.H.Deshmukh, structural and thermal analysis of piston, International journal of current Engineering and Technology. Special issue(5) (2013) 22-29.
[8] I.V.Syeswanth, N.Mani Parasad, International journal of mechanical engineering and technology(IJMET). 9(3) (2018) 962-969.
[9] V. Ganesan., Internal Combustion engines’, Tata McGraw-Hill Publications.
[10] John. B. Heywoob., Internal Combustion Engines: Applied Thermo Science, John Wiley and Sons.
[11] P.K.Nag, Engineering Thermodynamics’, Tata Mc Graw-Hill Publications.
[12] V.B. Bhandari, Design of machine elements, 3rd Edition, Tata Mc Graw-Hill Publications.
[13] Design of Automotive engine components by cad software; Autodesk Inventor and Solidworks: a comparative study, Talal Ibrahem Almudhaf journal of engineering research and application. 10(1) (2020) 25-31.
[14] Vinay Kumar Attar, Himanshu Arora, International Journal of Engineering Sciences & Research Technology. 5(6) (2016) 805-810.
[15] V.G. Cioata, I Kiss, V Alexa, S.A. Ratiu, Mechanical and Thermal analysis of the internal combustion engine piston using Ansys, IOP Conf. Series: Materials Science and Engineering 163 (2017) 1-11.
[16] Ranjith Raj. A, Udhayan. V, Veerapan.M, International Journal of advanced research in management, Architecture, Technology and Engineering (IJARMATE). 3(2) (2017) 184-187.
[17] Thermal Strength and Transient Dynamics Of a Diesel Engine, Journal of Vibroengineering.16(5) (2014) 2563-2571
[18] M. Ramakotaiah, Thermal Analysis of a Piston, International Journal Of Research Science and Engineering Technology. 6(3) (2018) 3065-3072.
[19] Valentin Mereuta, Static and Thermal Analysis of Piston using FEM analysis, International Journal Of Research Science and Engineering Technology. 6(1) (2018) 201-206.
[20] Vengatesvarn, N.Prithivraj, N.Periyasamy, Thermal Analysis and material optimization of the piston in IC engine, IJARIIE. 4(3) (2018) 153-170
[21] L.R PanchPande, R.Y. Patil, Design and Comparative analysis of piston by Ansys, International Journal for Scientific Research & Development. 7(5)(2019) 25-31.
[22] Yash Dhamecha, Vaibhav Saptarshi, Shubham Parikh, Design and Analysis of Piston using Different materials, International Research Journal of Engineering and Technology. 7(12) (2020) 1112-1117
[23] M. Fratita, F Popescu, K Uzuneanu, I V Ion, C M Angheluta, About Structural and thermal analysis of Diesel Engine Piston Using Ansys Software, IOP Conf. Series: Materials Science and Engineering 595 (2019) 1-6.
[24] R.Sabarish, M. Prem Jeya Kumar, The Design and Analysis of Piston - steady State Thermal Analysis using Ansys, International Journal of Mechanical and Production Engineering Research and Development. 9(3) (2019) 197-204
[25] Vinay D. Shinde, Prathik P. Shinde, Tanmay T. Revankar, Prof. Rohit Bhandwale, Thermal analysis of Piston using Ansys, International Research Journal of Engineering and Technology. 6(2) (2019) 2637-2639
[26] Rishu Kumar, Vinay Kumar Yadav, Anil Kumar Kurchania, FEM Analysis and Optimization of Piston of Different materials using Ansys, International Journal of Creative Research Thoughts. 8(7) (2020) 5485-5491.
[27] Ansys Element Reference http://www.ansys.com/customer/content/docuemtation/121/ans_elem .pdf. pp1-1688.
[28] Pandiyan. A, Arun Kumar. G, Daniel Nikedh. D, Design analysis and optimization of the piston for single cylinder 4 - stroke spark ignition engine using coupled steady-state thermal, structural analysis, International Journal of Mechanical Engineering and Technology. 10(3)(2019) 1044-1054.
[29] Adel Mohammed Abdo Abbas, Sachin Kamboj, Design and analysis of IC engine Piston and Piston ring on composite material using creo and Ansys software, International Journal of Scientific & Engineering Research. 11(10) (2020) 959-973.
[30] I.J. Isaac Premkumar, P. Ganeshan, S. Sudhagar, K. RAja, S.Senthilkumar, V.S. Chandrasekar, An Investigation on Piston Structural analysis related with experimental cylinder pressures using different biodiesel oil blend ratios, Elesevier Materials Today Proceedings. 22(2020) 2255- 2265.
[31] A. Nandha Kumar, Adithiyan. V, Pranav Hemachandran, P. Raj Kumar, J. Manikandan, , Review Paper on Design and analysis of Ic Engine Piston with Different material, International journal of management, Technology and Engineering. 9(1),(2019)208-214.
[32] CM Peng, GD Zhang, JF Gong, p Lei, KP Xie, DD Guo, Research on thermal load characterstics of piston based on fluid structure coupled heat transfer, IOP Conf. Series: Materials Science and Engineering. 423 (2018) 1-6.
[33] F. Szmytka, M.Salem, F.Rezai Aria, A.Oudin, Thermal Fatigue Analysis of automotive Diesel piston experimental procedure and numerical protocol, International journal of fatigue, elsevier.73(2015) 48-57.
[34] S.Kiran, M.Palanivendhan, Mitesh Kumar, Modelling and Analysis of Piston and Piston Rings of SI Engine for Different materials using FEM, IOP Conf. Series: Materials Science and Engineering. 993 (2020) 1-16.
[35] Subodh Kumar, C.S.Koli, A Review Paper on thermal analysis of Piston By Finite Element Analysis, International Journal of Scientific Research & Development. 5(12) (2018) 657-661.
[36] D. Mani Sai Kamal, Structural and Thermal Analysis of Ic Engine Piston Head with Concave and Convex Shapes, International Journal of Mechanical and Production Engineering. 5(7)(2017) 91-94.
[37] Sarket R.Jayale, Pro.G.A.Kadam, Umar Pathan, Stress Analysis of piston at different pressure load, International Research Journal of Engineering and Technology. 4(5) (2017) 1190-1194
[38] Balahari Krishnan S, Aezhisai Vallavi MS, Arunkumar M, Haripraveen A, Design and analysis of IC Engine Piston using Composite Materials, European Journal of Advances in Engineering and Technology. 4(3) (2017) 209 - 215.
[39] M. Praveen Kumar, Dr. S. Adhinarayanan, Design optimization of piston of an Ic Engine and Investigations on its influence on overall assembly, International Journal of engineering Science and computing. 7(6) (2017) 13542-13551.
[40] P.Viswabharathy, N.Jeyakumar, P.Kannan, A.Vairamuthu, Design and Analysis of Piston in internal combustion engine using Ansys, International journal o emerging Technologies in engineering research. 5(3) (2017) 62-70.
[41] Jadhav Vishal, Dr.R.K. Jain, Yogendra, Chauhan, Design and Analysis of Aluminium alloy piston using CAE tools, International Journal of engineering sciences & Research Technology. 5(7) (2016) 332-339.
[42] K.Rambabu, G.V.S.Srinivas, Transient Thermal Analysis of Modified piston Head for Improvement of Effieciency, International Journal & Magazine, Technology, Management and Research.7(9) (2020) 32-41.
[43] Dipayan Sinha, Susenjit Sarkar, Samar Chandra Mandal, Thermo Mechanical Analysis of a Piston with Different Thermal Barrier Coating Configuration, International Journal of Engineering Trends and Technology (IJETT), V48(6) (2017) 335-349.
[44] Amit B. Solanki , Mrs.Charula H.Patel , Abhishek Y. Makawana. Design Analysis and Optimization of Hybrid Piston for 4 stroke Single Cylinder 10 HP (7.35 kW) Diesel Engine –A Review, International Journal of Engineering Trends and Technology (IJETT), V16(6) (2014) 258-262.
[45] Vinamra Kumar Rastogi, Static Structural Analysis of a Forged Aluminum High-Performance Piston, International Journal of Engineering Trends and Technology (IJETT), V47(6) (2017) 356- 360.