IJBTT

Application of Mixed Methodologies in the Production Planning of Screw Conveyors for the Flour and Pasta Food Industry

Application of Mixed Methodologies in the Production Planning of Screw Conveyors for the Flour and Pasta Food Industry
	© 2022 by IJETT Journal
	Volume-70 Issue-8
	Year of Publication : 2022
	Authors : Lucy Casallo, Elizabeth Lucero, Fernando Maradiegue, Eloy Marcelo, Jose C. Alvarez
	DOI : 10.14445/22315381/IJETT-V70I8P244

How to Cite?

Lucy Casallo, Elizabeth Lucero, Fernando Maradiegue, Eloy Marcelo, Jose C. Alvarez, "Application of Mixed Methodologies in the Production Planning of Screw Conveyors for the Flour and Pasta Food Industry," International Journal of Engineering Trends and Technology, vol. 70, no. 8, pp. 435-446, 2022. Crossref, https://doi.org/10.14445/22315381/IJETT-V70I8P244

Abstract
The continuous growth of the food industry has consequently brought the need for equipment, parts, and pieces to meet the local market demand. One of these parts has a higher demand in the market, which are the screw conveyors of stainless steel 304; these are one of the components that have greater use of hours machines. For this reason, it is required to plan maintenance and repairs in the industry of reference. This article is focused on identifying the most important failure reasons in the agribusiness supply industry; it was identified that the processes of greatest opportunity measure and assembly. These processes increase the delivery time of the final product, which failures should not increase because providing the product outside the agreed time causes high financial impact as penalties and loss of customers. The company manufactures various parts for industrial mills and has a problem with delivery delays because its current fulfilment rate is below correct. This delay causes poor distribution, lack of proper planning, and not having proper cleaning in work areas. To solve this problem, it is proposed to apply mixed tools that include standardizing work to reduce production time and redistributing workstations; and the application of MRP. The proposal shows an increase in the level of on-time delivery service, which contributes to reducing penalties.

Keywords
Screw conveyor, On-time deliveries, System layout planning, Standardization work, Simulation.

Reference
[1] “Metal Mechanics is Key to Development,” Lima Chamber of Commerce, 2019.
[2] Data from the Annual Diagnostic and Evaluation Report on the Business Activity of Micro and Small Enterprises in Peru, Ministry of Production, Lima, Peru.
[3] Data from the Production Report, Ministry of Production, Lima, Peru.
[4] “Engineering & Operations,” Eemax, 2017.
[5] L. Casallo, E. Lucero, F. Maradiegue and J. C. Alvarez, “Proposal of Work Standardization to Improve a Metal-mechanical Process,” in IEEE International Conference on Industrial Engineering and Engineering Management IEEM, Conference Paper, pp. 668-672, 2021.
[6] L. Tiacci, “Mixed-Model U-Shaped Assembly Lines: Balancing and Comparing with Straight Lines with Buffers and Parallel Workstations,” Journal of Manufacturing Systems, vol. 45, pp. 286-305, 2017.
[7] C. Monteiro, L.P. Ferreira, N.O. Fernandes, F. J. G. Silva, and I. Amaral, “Improving the Machining Process of the Metalwork Industry by Upgrading Operative Sequences,” Standard Manufacturing Times and Production Procedure Changes, Procedia Manufacturing, vol. 38, pp. 1713–1722, 2019.
[8] A. Pooya, N. Fakhlaei, and A. Alizadeh-Zoeram, “Designing a Dynamic Model to Evaluate Lot-Sizing Policies in Different Scenarios of Demand and Lead Times in Order to Reduce the Nervousness of the MRP System,” Journal of Industrial and Production Engineering, vol. 38, no. 2, pp. 122-136, 2021.
[9] J. S. Randhawa, and I. S. Ahuja, “5S – A Quality Improvement Tool for Sustainable Performance: Literature Review and Directions,” International Journal of Quality and Reliability Management, Emerald Group Publishing Ltd, vol. 34, no. 3, pp. 334-361, 2017.
[10] P. Neves, F. J. G. Silva, L. P. Ferreira, T. Pereira, A. Gouveia, and C. Pimentel, “Implementing Lean Tools in the Manufacturing Process of Trimmings Products,” in Procedia Manufacturing, vol. 17, pp. 696-704, 2018.
[11] C. Veres, L. Marian, S. Moica, and K. Al-Akel, “Case Study Concerning 5S Method Impact in an Automotive Company,” in Procedia Manufacturing, vol. 22, pp. 900-905, 2018.
[12] A. D. Makwana, and G. S. Patange, “Strategic Implementation of 5S and its Effect on Productivity of Plastic Machinery Manufacturing Company,” Australian Journal of Mechanical Engineering, vol. 20, no. 1, pp. 111-120, 2019.
[13] T. Pombal, L. P Ferreira, J. C. Sá, M. T. Pereira, and F. J. G. Silva, “Implementation of Lean Methodologies in the Management of Consumable Materials in the Maintenance Workshops of an Industrial Company,” in Procedia Manufacturing,vol. 38, pp. 975-982, 2019.
[14] F. Lastra, N. Meneses, E. Altamirano, C. Raymundo, and J.M. Moguerza, “Production Management Model Based on Lean Manufacturing for Cost Reduction in the Timber Sector in Peru,” in Advances in Intelligent Systems and Computing, vol. 971, pp. 467- 476, 2019.
[15] C. E. Gutti-Salazar, F. Segura-Chavez, F. Maradiegue-Tuesta and J. C. Alvarez-Merino, “Kanban-CONWIP Hybrid Model for Improving Productivity of an Electrostatic Coating Process,” in IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Conference Paper, pp. 1295-1299, 2019.
[16] M. Rabanal, S. Zamami, J. Quiroz, and J. Alvarez, “Systematic Layout Planning: A Research on the Third-Party Logistics of a Peruvian Company,” in Advances in Intelligent Systems and Computing, vol. 1018, pp. 988-993, 2020.
[17] R. H. C. Machado, A. L. Helleno, M. C. de Oliveira, M. S. C. dos Santos, and R. M. da C. Dias, “Analysis of the Influence of Standard Time Variability on the Reliability of the Simulation of Assembly Operations in Manufacturing Systems,” Human Factors, vol. 61, no. 4, pp. 627-641, 2019.
[18] Y. Harari, R. Riemer, and A. Bechar, “Factors Determining Workers' Pace While Conducting Continuous Sequential Lifting, Carrying, and Lowering Tasks,” Applied Ergonomics, vol. 67, pp. 61-70, 2018.
[19] A. Desai, “Ease of Product Assembly through a Time-Based Design Methodology,” Assembly Automation, vol. 39, no. 5, pp. 881-903, 2019.
[20] A. P. Velasco Acosta, C. Mascle, and P. Baptiste, “Applicability of Demand-Driven MRP in a Complex Manufacturing Environment,” International Journal of Production Research, vol. 58, no. 14, pp. 4233-4245, 2020.
[21] M. Arévalo, J. Montenegro, G. Viacava, C. Raymundo, and F. Dominguez, “Proposal for Process StandarDization for Continuous Improvement in a Peruvian Textile Sector Company,” in Advances in Intelligent Systems and Computing, vol. 1026, pp. 909-915, 2020.
[22] V. Barzola-Cisneros, J. Calderon-Tirado, G. Viacava-Campos, and D. Aderhold, “Production Model to Increase Productivity and Delivery Compliance in the Peruvian Textile Sector by Applying Value Stream Mapping, 5S and Flexible Production Systems,” in Advances in Intelligent Systems and Computing, vol. 1253, pp. 599-605, 2021.
[23] S. A. Ali Naqvi, M. Fahad, M. Atir, M. Zubair, and MM Shehzad, “Productivity Improvement of a Manufacturing Facility using Systematic Layout Planning,” Cogent Engineering, vol. 3, no. 1, 2016.
[24] A. Bocanegra, “Proposal to Improve Production Management to Increase the Profitability of a Publishing Company,” Thesis to obtain the Professional Degree of Industrial Engineer, Universidad Privada del Norte. Trujillo, Peru, 2018.
[25] G. Goyal, and D.S. Verma, “Optimization of Plant Layout in Manufacturing Industry,” International Journal of Recent Technology and Engineering IJRTE, vol. 8, no. 2, pp. 3115-3118, 2019.
[26] Tushar Kapratwar, Siddhi Jadhav, Harshvardhan Uttarwar, Nirmity Bomidwar, Shubham Patil, "Layout Improvement at a Printing Press," International Journal of Industrial Engineering, vol. 7, no. 3, pp. 9-24, 2020. Crossref, https://doi.org/10.14445/23499362/IJIE-V7I3P102
[27] Haftu Hailu and Tewedros Hailu, "Reduction of Long Delivery Time by Implementing Advanced Kaizen (Problem Solving Approach)," International Journal of Industrial Engineering, vol. 4, no. 3, pp. 26-48, 2017. Crossref, https://doi.org/10.14445/23499362/IJIE-V4I6P103
[28] Debaleena Chatterjee, Supriya Pandey, "A Time Study on Dispatch and Delivery of Material in the Food Processing Sector," International Journal of Economics and Management Studies, vol. 7, no. 2, pp. 52-58, 2020. Crossref, https://doi.org/10.14445/23939125/IJEMS-V7I2P108.