IJBTT

Finite Element Analysis of a Patient Specific Maxillofacial Implant

Finite Element Analysis of a Patient Specific Maxillofacial Implant
	© 2022 by IJETT Journal
	Volume-70 Issue-9
	Year of Publication : 2022
	Authors : J. Akshay Kumar, Kode Jaya Prakash, Yeole Shivraj Narayan, B. Satyanarayana
	DOI : 10.14445/22315381/IJETT-V70I9P235

How to Cite?

J. Akshay Kumar, Kode Jaya Prakash, Yeole Shivraj Narayan, B. Satyanarayana, "Finite Element Analysis of a Patient Specific Maxillofacial Implant" International Journal of Engineering Trends and Technology, vol. 70, no. 9, pp. 354-361, 2022. Crossref, https://doi.org/10.14445/22315381/IJETT-V70I9P235

Abstract
The present study examines the mastication force that the implant can withstand for a patient-specific parameter. As a result, a finite element (FE) analysis is performed on the patient's unique oral maxillofacial implant. The force applied to the implant gradually increases to create a relationship between implant strength and mastication forces. The FE analysis's von Mises stress findings assist in identifying the maximum allowed mastication force. Furthermore, FE analysis facilitates the identification of crucial areas of the implant. There is just one critical area where stress concentration occurs in the implant used for this purpose. The findings of the FE analysis based on mastication forces are utilized to advise the patient on food intake restrictions.

Keywords
Computational Tomography, Finite element analysis, Mastication force, Maxillofacial implant, Patient-specific implant.

Reference
[1] M. Colombo, C. Mangano, E. Mijiritsky, M. Krebs, U. Hauschild, T. Fortin, “Clinical Applications and Effectiveness of Guided Implant Surgery: A Critical Review Based on Randomized Controlled Trials,” BMC Oral Health, vol. 17, pp. 1-9, 2017. Https://Doi.Org/10.1186/S12903-017-0441-Y.
[2] G. Huang, L. Wu, J. Hu, X. Zhou, F. He, L. Wan, and S. Pan, “Main Applications and Recent Research Progresses of Additive Manufacturing in Dentistry,” BioMed Research International., vol. 2022, pp. 1-26, 2022. Https://Doi.Org/10.1155/2022/5530188
[3] P. Honigmann, N. Sharma, B. Okolo, U. Popp, B. Msallem, and F. M. Thieringer, “Patient-Specific Surgical Implants Made of 3d Printed Peek: Material, Technology, and Scope of Surgical Application,” BioMed Research International, vol. 2018, pp. 1-8, 2018. Doi: 10.1155/2018/4520636.
[4] Parthasarathy, Jayanthi, “3d Modeling, Custom Implants and Its Future Perspectives in Craniofacial Surgery,” Annals of Maxillofacial Surgery., vol. 4, no. 1, pp. 9-18, 2014. Doi:10.4103/2231-0746.133065
[5] K.S.Vepa, N.V.S.S.Sagar, B.Esakki and C.Udayagiri, “Numerical Modeling and Analysis of A Multi-Rotor Uas,” In Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering, pp. 171-179, 2021.
[6] N.V.S.S.Sagar, B.Esakki, C.Udayagiri and K.S.Vepa, “Multistage Mass Optimization of a Quadcopter Frame,” In Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering, pp. 181-188, 2021.
[7] K. S. Vepa, and N. V. S. S. Sagar, “Design, Optimization and Manufacturing of Quad Copter Frame Using Fdm,” International Journal of Engineering Advanced Technology, vol. 8, no. 5, pp. 1726-1731, 2019.
[8] Suliman Alfarawi, Azeldin El-Sawi, Hossin Omar, “Discontinuous Finite Element Analysis of Counter Flow Heat Exchanger Unit Cell,” SSRG International Journal of Mechanical Engineering, vol. 8, no. 8, pp. 7-10, 2021. Crossref, https://doi.org/10.14445/23488360/Ijme-V8i8p102.
[9] M. I. Ishak, M. R. A. Kadir, E. Sulaiman, and N. H. A. Kasim, “Finite Element Analysis of Different Surgical Approaches in Various Occlusal Loading Locations for Zygomatic Implant Placement for the Treatment of Atrophic Maxillae,” International Journal of Oral Maxillofacial Surgery., vol. 41, pp. 1077–1089, 2012. https://doi.org/10.1016/J.Ijom.2012.04.010.
[10] D. Darvish, S. Khorramymehr, and M. Nikkhoo, “Finite Element Analysis of the Effect of Dental Implants on Jaw Bone under Mechanical and Thermal Loading Conditions,” Mathamatical Problems in Engineering., vol. 2021, pp. 1-17, 2021. Https://Doi.Org/10.1155/2021/9281961
[11] J. W. Nicholson, “Titanium Alloys for Dental Implants: A Review,” Prosthesis., vol. 2, no. 2, pp. 100-116, 2020.
[12] V. C. Pathade, and S. N. Keche, “Determination of Stresses Induced in the Jawbone After Implant of Tooth Using Finite Element Method,” International Journal Scientific and Engineering Research, vol. 4, no. 3, pp. 104-107, 2016.
[13] A. Yodrux, N. Yodpijit, and M. Jongprasithporn, “Compressive Stress, Shear Stress, and Displacement Study on Different Structured Dental Implant: 3-Dimensional Finite Element Analysis,” International Journal of Engineering and Research Technology, vol. 6, no. 7, pp. 427-432, 2017.
[14] L. Zheng, J. Yang, X. Hu, and J. Luo, “Three Dimensional Finite Element Analysis of a Novel Osteointegrated Dental Implant Designed to Reduce Stress Peak of Cortical Bone,” Acta Bioengineering and Biomechnics., vol. 16, no. 3, pp. 21-28, 2014.
[15] A. Merdji, B. Bachir Bouiadjra, T. Achour, B. Serier, B. Ould Chikh, and Z. O. Feng, “Stress Analysis In Dental Prosthesis,” Computational Materials Science, vol. 49, no. 1, pp. 126-133, 2010. https://doi.org/10.1016/J.Commatsci.2010.04.035.
[16] Abdul Azeez, A. Gopichand, N. V. S. Shankar, and K. Hanumantharao, "A Novel Prosthetic Hand Support for Physically Disabled," International Engineering Trends and Technology, vol. 29, no. 6, pp. 295-298, 2015. https://doi.org/10.14445/22315381/Ijett-V29p255.
[17] S. Mahajan, and R. Patil, “Optimizing Dental Implant Model By Comparison of Three Dimensional Finite Element,” International Journal Innovative Research Science, Engineering and Technology., vol. 4, no. 11, pp. 11223-11231, 2015. Doi:10.15680/Ijirset.2015.0411067
[18] J. Giannatsis, and V. Dedoussis, “Additive Fabrication Technologies Applied to Medicine and Health Care: A Review,” International Journal of Advanced Manufacturing Technology, vol. 40, no. 1-2, pp. 116-127, 2009.
[19] H. T. Yau, T. J. Yang, and Y. C. Chen, “Tooth Model Reconstruction Based Upon Data Fusion for Orthodontic Treatment Simulation,” Computers in Biology and Medicine., vol. 48, pp. 8-16, 2014. Doi: 10.1016/J.Compbiomed.2014.02.001.
[20] Samad Gadiwale, S. A. Kore, "Analysis of Welded Joint Used in Pipeline Support Using Finite Element Method," SSRG International Journal of Mechanical Engineering, vol. 7, no. 6, pp. 41-46, 2020. Crossref, https://doi.org/10.14445/23488360/IJME-V7I6P107.
[21] S. Negi, S. Dhiman, and R. K. Sharma, “Basics and Applications of Rapid Prototyping Medical Models,” Rapid Prototyping Journal, vol. 20, no. 3, pp. 256-267, 2014. https://doi.org/10.1108/Rpj-07-2012-0065
[22] Humaira Tanvir, Jasmeena Tabeen Bhatt, Vikram Kapoor, “Developing Muscular Balance in a Denture”," SSRG International Journal of Medical Science, vol. 7, no. 5, pp. 4-6, 2020. Crossref, https://doi.org/10.14445/23939117/IJMS-V7I5P102.
[23] B. Sivasankari, B. Affrudeen, R. Abinaya, B. Harish, and V. Gunaseelan, “Preferment and Intension of the Intellectual 3d Printed Prosthetic Arm Appropriating Emg Signals,” International Journal of Engineering Trends and Technology, vol. 67, no. 10, pp. 95-99, 2019. https://doi.org/10.14445/22315381/IJETT-V67I10P218.
[24] S. Andrejus, “A Digital Workflow for Modeling of Custom Dental Implants,” 3D Printing in Medicine., vol. 5, no. 1, pp. 1-11, 2019.
[25] N. Parkhe, U. Hambire, C. Hambire, and S. Gosavi, “Enhancing Dental Implant Model By Evaluation of Three-Dimensional Finite Element Analysis,” International Journal of Engineering and Science Invention., vol. 4, no. 12, pp. 26-33, 2015.
[26] G. Laura, J. P. Salcido, T. Guda, and J. L. Ong, “Current Trends In Dental Implants,” Journal of the Korean Association of Oral and Maxillofacial Surgeons, vol. 40, no. 2, pp. 50-60, 2014. https://doi.org/10.5125/Jkaoms.2014.40.2.50
[27] Z. Mehmet, and S. Aksoy, “Stress Analysis Around Dental Implant in Human Mandible,” Mathematical and Computational. Applicaion, vol. 3, no. 2, pp. 83-91, 1998.
[28] Yahya Işık, Ecenur Öztürk, "Experimental Analysis of Cutting Forces and Finite Element Simulation in Milling Operations," SSRG International Journal of Mechanical Engineering, vol. 8, no. 11, pp. 1-7, 2021. Crossref, https://doi.org/10.14445/23488360/IJME-V8I11P101.
[29] N.V.S.S.Sagar and K.S.Vepa, “Experimental Investigations for Improving the Strength of Parts Manufactured Using Fdm Process," In Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering, pp. 307-313, 2019.
[30] R. Jain, Supriya, S. Bindra, and K. Gupta, “Recent Trends of 3-D Printing In Dentistry - A Review,” Annals of Prosthodontics and Restorative. Dentistry., vol. 2, no. 4, pp. 101-104, 2016.