IJBTT

Stability Marshall of Porous Asphalt Mixed with Waste Polyethylene Terephthalate (PET) and Modified Asbuton

Stability Marshall of Porous Asphalt Mixed with Waste Polyethylene Terephthalate (PET) and Modified Asbuton
	© 2023 by IJETT Journal
	Volume-71 Issue-7
	Year of Publication : 2023
	Author : D. S. Mabui, M. Tumpu, M. W. Tjaronge, Irianto, Sri Gusty, Mansyur
	DOI : 10.14445/22315381/IJETT-V71I7P221

How to Cite?

D. S. Mabui, M. Tumpu, M. W. Tjaronge, Irianto, Sri Gusty, Mansyur, "Stability Marshall of Porous Asphalt Mixed with Waste Polyethylene Terephthalate (PET) and Modified Asbuton," International Journal of Engineering Trends and Technology, vol. 71, no. 7, pp. 216-222, 2023. Crossref, https://doi.org/10.14445/22315381/IJETT-V71I7P221

Abstract
The stability of a porous asphalt mixture, including plastic waste, will be investigated in this study. In this study, plastic waste is used as an addition to improve the performance of the porous asphalt mixture. In the lab, this research is experimental. The test object without plastic waste was used as a comparison, and the variables of this study were the porous asphalt mixture utilizing plastic waste in amounts as much as 0.5%, 1.0%, 1.5%, 2.0%, and 2.5%. The results showed that the porous asphalt mixture's stability value containing plastic waste increased by 0.5%, 1.0%, 1.5%, and 2.0% compared to the porous asphalt mixture's stability value without plastic waste, which was 25.50%, 13.84%, 22.42%, and 27.40%, respectively. However, the stability value decreased from 2.0% plastic waste to 2.5% or 26.57%. Therefore, according to the study's findings and the resulting stability value, the ideal level of plastic trash is 2.0%.

Keywords
Stability marshall, Porous asphalt, PET, Modified asbuton.

References
[1] Irianto, M. Tumpu, and H. Parung, “Volumetric Characteristics of HRS-WC Mixed Using Petroleum Bitumen Grade 60/70 as Binder,” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Irianto et al., “Influence of Number of Collisions towards Asphalt Emulsion Mixture Stability Using Marshall Method (SNI 06-2489-1991),” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[3] D.R.G. Kabo, M. Tumpu, and H. Parung, “Influence of Water Immersion on Stability of AC-WC Mixed with Gondorukem Additional Material,” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[4] M. Tumpu et al., “Permeability Measurement of Hot Mix Cold Laid Containing Asbuton as Porous Asphalt,” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Sureyya Tayfur, Halit Ozen, and Atakan Aksoy, “Investigation of Rutting Performance of Asphalt Mixtures, Containing Polymer Modifiers,” Construction and Building Material, vol. 21, no. 2, pp. 328-337, 2007.
[CrossRef] [Google Scholar] [Publisher Link]
[6] B. Birgisson et al., “Determination and Prediction of Crack Patterns in Hot Mix Asphalt (HMA) Mixtures,” Engineering Fracture Mechanics, vol. 75, no. 3-4, pp. 664 -673, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[7] M.W. Tjaronge, and Rita Irmawaty, “Influence of Water Immersion on Physical Properties of Porous Asphalt Containing Liquid Asbuton as Bituminous Asphalt Binder,” Proceedings of 3rd International Conference and Sustainable Construction Material and Technologies, vol. 153, 2013.
[Google Scholar] [Publisher Link]
[8] D.S. Mabui et al., “Resistance to Cohesion Loss in Cantabro Test on Specimens of Porous Asphalt Containing Modificated Asbuton,” IOP Conference Series: Earth and Environmental Science, vol. 419, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[9] D.S. Mabui et al., “Performance of Porous Asphalt Containing Modificated Buton Asphalt and Plastic Waste,” International Journal of GEOMATE, vol. 18, no. 65, pp. 118-123, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[10] L. Caroles et al., “Marshall Properties of LASBUTAG Asphalt Mixes With Pertalite as a Modifier,” IOP Conference Series: Earth and Environmental Science, vol. 871, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[11] M. Pasra et al., “Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads,” International Journal of Engineering Transactions C: Aspects, vol. 35, no. 9, pp. 1779-1786, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[12] P.R. Rangan, M. Tumpu, and Mansyur, “Utilization of Igneous Rock as Coarse Aggregate in Asphalt Concrete Binder Course Mixture,” IOP Conference Series: Earth and Environmental Science, vol. 1134, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[13] M. Tumpu, P.R. Rangan, and Mansyur, “Compressive Strength Characteristic of Concrete Using Mountain Sand,” IOP Conference Series: Earth and Environmental Science, vol. 1134, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Herman Parung et al., “Crack Pattern of Lightweight Concrete under Compression and Tensile Test,” Annals of Chemistry: Science of Material, vol. 47, no. 1, pp. 35-41, 2023.
[Google Scholar] [Publisher Link]
[15] Fred. W. Billmeyer, Textbook of Polymer Science, Third Edition, John Wiley & Sons, New York.
[Google Scholar] [Publisher Link]
[16] Adebayo Olatunbosun Sojobi et al., “Recycling of Polypthylene Terepthalate (PET) Plastic Bottle Wastes in Bituminous Asphaltic Concrete,” Cogent Engineering, vol. 3, no. 1, 2015.
[CrossRef] [Publisher Link]
[17] K. Dharshan, and K.C. Manjunath, “Experimental Study of an Effective Utilization of Industrial By Products in Bituminous Paving Mixes,” SSRG International Journal of Civil Engineering, vol. 9, no. 7, pp. 11-17, 2022.
[CrossRef] [Publisher Link]
[18] Sara Fernandes et al., “Utilization of Waste Materials to Improve Asphalt Mixtures Performance,” Proceeding of the 6th International Conference on Mechanics and Materials in Design, pp. 2047-2052, 2015.
[Google Scholar] [Publisher Link]
[19] Silvia Angelone et al., “Green Pavements: Reuse of Plastic Waste in Asphalt Mixtures,” Materials and Structures, vol. 49, pp. 1655-1665, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Dhirar Taha Mohammed, and Zaid Hazim Hussein, “Use of Pyrolisis Polyethylene Terephthalate (PET) as Asphalt Modifier in Asphalt Concrete Mix,” International Journal of Science Engineering and Technology Research, vol. 3, no. 11, pp. 2908-2913, 2014.
[Google Scholar]
[21] Einas Ibrahim Ali Musa, and Hago El Fadil Haron, “Effect of the Low Density Polyethylene Carry Bags Waste on the Asphalt Mixture,” International Journal of Engineering Research and Science & Technology, vol. 3, no. 2, 2014.
[Google Scholar] [Publisher Link]
[22] Ch. Naveen Kumar, V. John Prashath, and K. Hari Krishna, “An Experimental Study On Bitumen Properties By Using Medical Plastic Waste,” SSRG International Journal of Civil Engineering, vol. 6, no. 8, pp. 17-29, 2019.
[CrossRef] [Publisher Link]
[23] Parea Rusan Rangan, M. Tumpu, and Mansyur, “Marshall Characteristics of Quicklime and Portland Composite Cement (PCC) as Fillers in Asphalt Concrete Binder Course (AC-BC) Mixture,” Annals of Chemistry: Science of Material, vol. 47, no. 1, pp. 51-55, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Rosmariani Arifuddin et al., “Study of Measuring the Application of Construction Safety Management Systems (CSMS) in Indonesia using the Analytic Hierarchy Process,” International Journal of Engineering Trends and Technology, vol. 71, no. 3, pp. 354–361, 2023.
[CrossRef] [Publisher Link]
[25] Amiruddin et al., Experimental Study of HRS-WC Mixture with Petroleum Asphalt and Addition of Latex Additives as Binding Materials, Civil Engineering National Conference (Context 6) (in Indonesian), pp 133–140, 2012.
[Google Scholar]
[26] M. Tumpu et al., “Effect of Limestone and Buton Granular Asphalt (BGA) on Density of Asphalt Concrete Wearing Course (AC-WC) Mixture,” IOP Conference Series: Earth and Environmental Science, vol. 419, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[27] M. Tumpu, M.W. Tjaronge, and A.R. Djamaluddin, “Prediction of Long-term Volumetric Parameters of Asphalt Concrete Binder Course Mixture using Artificial Ageing Test,” IOP Conference Series: Earth and Environmental Science, vol. 419, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[28] M.W. Iroth, M.W. Tjaronge, and M. Pasra, “Influence of Short Term Oven aging on Volumetric Properties of Asphalt Concrete Mixture Containing Modified Buton Asphalt and Limestone Powder Filler,” IOP Conference Series: Earth and Environmental Science, vol. 419, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[29] P.R. Rangan et al., “Compressive Strength of High-strength Concrete with Cornice Adhesive as a Partial Replacement for Cement,” IOP Conference Series: Earth and Environmental Science, vol. 871, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Abrar Mahyuddin et al., “Experimental Analysis on Stability and Indirect Tensile Strength in Asphalt Emulsion Mixture Containing Buton Granular Asphalt,” International Journal of Applied Engineering Research, vol. 12, no. 12, pp. 3162-3169, 2017.
[Google Scholar] [Publisher Link]
[31] S. Gusty et al., “Marshall Characteristics of Porous Asphalt Containing Low Density Polyethylene (LDPE) Plastic Waste,” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[32] P.R. Rangan et al., “The Effect of Curing on Compressive Strength of Geopolymer Mortar Made Rice Straw Ash, Fly Ash and Laterite Soil,” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Mansyur et al., “Utilization of Sea Water to Production of Concrete in Terms of Mechanical Behavior,” IOP Conference Series: Earth and Environmental Science, vol. 921, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[34] Noor Dhani, Ahmad Gasruddin, and Laswar Gombilo Bitu, “Effect of Aggregate Abrasion Value on Marshall Parameters in Mixed LGA (Lawele Granular Asphalt),” International Journal of Engineering Trends and Technology, vol. 71, no. 2, pp. 259-267, 2023.
[CrossRef] [Publisher Link]
[35] General Spesification of Indonesia 2018, Indonesia requirement (in Indonesian). [Online]. Available: https://simk.bpjt.pu.go.id/file_uploads/ketentuan/spesifikasi-umum-bina-marga-2018-untuk-pekerjaan-konstruksi-jalan-dan-jembatan-revisi-2-no-161sedb2020_pdf_22-02-2022_06-46-35.pdf
[36] REAM – SP 5/2008, Spesification for Porous Asphalt, Road Engineering Association of Malaysia. [Online]. Available: http://kllibrary.dbkl.gov.my/client/en_US/pkl/search/detailnonmodal/ent:$002f$002fSD_ILS$002f0$002fSD_ILS:259410/one?qu=Specifications&qf=SUBJECT%09Subject%09Pavements%2C+Asphalt%09Pavements%2C+Asphalt&ic=true&ps=300
[37] Standard National of Indonesia, Standard Test Method of Asphalt Mix with Marshall Test, SNI 06-2489-1991.
[38] Rune Elvik, and Poul Greibe, “Road Safety Effects of Porous Asphalt: A Systematic Review of Evaluation Studies,” Accident Analysis & Prevention, vol. 37, no. 3, pp. 515-522, 2005.
[CrossRef] [Google Scholar] [Publisher Link]
[39] Y.C. Sanjana, T.R. Nikhil, and Yateen Lokesh, “Performance Evaluation of Hot Mix Asphalt using Modified Binders for Bituminous Concrete Grade-2,” SSRG International Journal of Civil Engineering, vol. 5, no. 9, pp. 12-17, 2018.
[CrossRef] [Publisher Link]
[40] Pratikhsa Singh Rajput, and R.K. Yadav, “Use of Plastic Waste in Bituminous Road Construction,” International Journal of Science Technology and Engineering, vol. 2, no. 10, pp. 509-513, 2016.
[Google Scholar] [Publisher Link]
[41] Mehrtash Soltani et al., “Analysis of Fatigue Properties of Unmodified and Polyethylene Terephthalate Modified Asphalt Mixtures Using Response Surface Methodology,” Engineering Failure Analysis, vol. 58, pp. 238-248, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[42] Irianto, and M. Tumpu, “Experimental Study on Determination of Optimum Asphalt Emulsion Content Using Bina Marga Indonesia Requirement,” AIP Conference Proceedings, vol. 2391, no. 1, 2022.
[CrossRef] [Google Scholar] [Publisher Link]