Mechano-Physical Properties and Microstructure of Colloidal Nanosilica-Incorporated Volcanic Ash-Based Geopolymer Mortar after Exposure to Elevated Temperatures

Mechano-Physical Properties and Microstructure of Colloidal Nanosilica-Incorporated Volcanic Ash-Based Geopolymer Mortar after Exposure to Elevated Temperatures

  IJETT-book-cover           
  
© 2024 by IJETT Journal
Volume-72 Issue-5
Year of Publication : 2024
Author : Samson Kiprop, Richard Ocharo Onchiri, Naftary Gathimba
DOI : 10.14445/22315381/IJETT-V72I5P108

How to Cite?

Samson Kiprop, Richard Ocharo Onchiri, Naftary Gathimba, "Mechano-Physical Properties and Microstructure of Colloidal Nanosilica-Incorporated Volcanic Ash-Based Geopolymer Mortar after Exposure to Elevated Temperatures," International Journal of Engineering Trends and Technology, vol. 72, no. 5, pp. 66-85, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I5P108

Abstract
Due to the expansion of construction activities and the increased threat of fires to civil structures and lives, there has been a need to find alternative fire-resistant materials that meet sustainability and green material standards. This study reports on using Colloidal Nanosilica (CNS) to modify the elevated temperature resistance of Volcanic Ash-Based Geopolymer Mortar (VAGPM). The volcanic Ash (VA) locally sourced in Kenya was partially replaced with between 1-5% CNS by mass of VA and activated with sodium or potassium hydroxide and sodium silicate. The workability of the resulting mixtures was determined. Following a curing period of 28 days, the VAGPM specimens were exposed to temperatures ranging from 200-8000C for durations of 1 and 2 hours, and their compressive strengths, mass losses, volumetric changes, visual appearances, and microstructural properties were analysed. Results indicated that replacing VA with CNS up to 5% by mass resulted in a reduction in the flowability of the fresh mortar and that adding 2% CNS improved compressive strength and elevated temperature resistance. In contrast, higher levels did not significantly improve performance. Specimens recorded increased compressive strengths up to 400 and 6000C. Increasing CNS levels decreased mass loss and volume shrinkage. The samples also displayed changes in colour and mineralogical phases after exposure to elevated temperatures. CNS yielded a denser microstructure.

Keywords
Colloidal Nanosilica, Elevated temperature, Geopolymer mortar, Mechano-physical properties, Volcanic ash.

References
[1] Rahel Kh. Ibrahim, R. Hamid, and M.R. Taha, “Fire Resistance of High-Volume Fly Ash Mortars with Nanosilica Addition,” Construction and Building Materials, vol. 36, pp. 779-786, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[2] M.W. Hussin et al., “Performance of Blended Ash Geopolymer Concrete at Elevated Temperatures,” Materials and Structures, vol. 48, pp. 709-720, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Alaa M. Rashad, and Ahmed S. Ouda, “Thermal Resistance of Alkali-Activated Metakaolin Pastes Containing Nano-Silica Particles,” Journal of Thermal Analysis and Calorimetry, vol. 136, pp. 609-620, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Salmabanu Luhar, Sandeep Chaudhary, and Ismail Luhar, “Thermal Resistance of Fly Ash Based Rubberized Geopolymer Concrete,” Journal of Building Engineering, vol. 19, pp. 420-428, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Siti Nooriza Abd Razak et al., “Fire Performance of Fly Ash-Based Geopolymer Concrete: Effect of Burning Temperature,” IOP Conference Series: Earth and Environmental Science, 4th International Symposium on Green and Sustainable Technology, Kampar, Malaysia, vol. 945, pp. 1-6, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[6] S.K. Saxena, Mukesh Kumar, and N.B. Singh, “Fire Resistant Properties of Alumino Silicate Geopolymer Cement Mortars,” Materials Today: Proceedings, vol. 4, no. 4, pp. 5605-5612, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Marouane EL Alouani et al., “Influence of the Nature and Rate of Alkaline Activator on the Physicochemical Properties of Fly Ash-Based Geopolymers,” Advances in Civil Engineering, vol. 2020, pp. 1-13, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Sujay Chetan Nanavati et al., “A Review on Fly Ash Based Geopolymer Concrete,” IOSR Journal of Mechanical and Civil Engineering, vol. 14, no. 4, pp. 12-16, 2017.
[Google Scholar] [Publisher Link]
[9] Rafael Andres Robayo-Salazar, Mejía de Gutiérrez, and Francisca Puertas, “Study of Synergy between a Natural Volcanic Pozzolan and a Granulated Blast Furnace Slag in the Production of Geopolymeric Pastes and Mortars,” Construction and Building Materials, vol. 157, pp. 151-160, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Enes Ekinci et al., “The Improvement of Mechanical, Physical and Durability Characteristics of Volcanic Tuff Based Geopolymer Concrete by Using Nano Silica, Micro Silica and Styrene-Butadiene Latex Additives at Different Ratios,” Construction and Building Materials, vol. 201, pp. 257-267, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Salmabanu Luhar, Demetris Nicolaides, and Ismail Luhar, “Fire Resistance Behaviour of Geopolymer Concrete: An Overview,” Buildings, vol. 11, no. 3, pp. 1-29, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Nikolaos Nikoloutsopoulos et al., “Physical and Mechanical Properties of Fly Ash Based Geopolymer Concrete Compared to Conventional Concrete,” Buildings, vol. 11, no. 5, pp. 1-14, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Alaa M. Rashad, and Sayieda R. Zeedan, “The Effect of Activator Concentration on the Residual Strength of Alkali-Activated Fly Ash Pastes Subjected to Thermal Load,” Construction and Building Materials, vol. 25, no. 7, pp. 3098-3107, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[14] M.S. Morsy et al., “Behavior of Blended Cement Mortars Containing Nano-Metakaolin at Elevated Temperatures,” Construction and Building Materials, vol. 35, pp. 900-905, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Rabii Hattaf et al., “Influence of the Integration of Geopolymer Wastes on the Characteristics of Binding Matrices Subjected to the Action of Temperature and Acid Environments,” Polymers, vol. 14, no. 5, pp. 1-19, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Fatih Kantarci, İbrahim Türkmen, and Enes Ekinci, “Improving Elevated Temperature Performance of Geopolymer Concrete Utilizing Nano-Silica, Micro-Silica and Styrene-Butadiene Latex,” Construction and Building Materials, vol. 286, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Surendra P. Shah, Pengkun Hou, and Maria S. Konsta-Gdoutos, “Nano-Modification of Cementitious Material: Toward a Stronger and Durable Concrete,” Journal of Sustainable Cement-Based Materials, vol. 5, no. 1-2, pp. 1-22, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Jean Noël Yankwa Djobo et al., “Volcanic Ash-Based Geopolymer Cements/Concretes: The Current State of the Art and Perspectives,” Environmental Science and Pollution Research, vol. 24, pp. 4433-4446, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Muhammad Zahid et al., “Statistical Modeling and Mix Design Optimization of Fly Ash Based Engineered Geopolymer Composite Using Response Surface Methodology,” Journal of Cleaner Production, vol. 194, pp. 483-498, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Senthil P. Mathew, A. Sujatha, and Yashida Nadir, “Bond Strength Properties of Confined and Unconfined Coconut Shell Aggregate Concrete by Beam Splice Test,” Sustainability, Agri, Food and Environmental Research, vol. 10, pp. 31-34, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Nabila Shehata et al., “Geopolymer Concrete as Green Building Materials: Recent Applications, Sustainable Development and Circular Economy Potentials,” Science of the Total Environment, vol. 836, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Hengels Castillo et al., “Factors Affecting the Compressive Strength of Geopolymers: A Review,” Minerals, vol. 11, no. 12, pp. 1-28, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Anwar Hosan, Sharany Haque, and Faiz Shaikh, “Compressive Behaviour of Sodium and Potassium Activators Synthetized Fly Ash Geopolymer at Elevated Temperatures: A Comparative Study,” Journal of Building Engineering, vol. 8, pp. 123-130, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Wan Mastura Wan Ibrahim et al., “Chemical Distributions of Different Sodium Hydroxide Molarities on Fly Ash/Dolomite-Based Geopolymer,” Materials, vol. 15, no. 17, pp. 1-15, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Xi Jiang et al., “A Comparative Study on Geopolymers Synthesized by Different Classes of Fly Ash after Exposure to Elevated Temperatures,” Journal of Cleaner Production, vol. 270, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Joseph Davidovits, Geopolymer Chemistry and Applications, 5th ed., Geopolymer Institute, 2020.
[Publisher Link]
[27] Ahmad Azrem Azmi et al., “A Review on Fly Ash Based Geopolymer Rubberized Concrete,” Key Engineering Materials, vol. 700, pp. 183-196, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Mir Firasath Ali, and M.M. Vijayalakshmi Natrajan, “A Review of Geopolymer Composite Thermal Properties,” IOP Conference Series: Earth and Environmental Science, International Conference on Contemporary and Sustainable Infrastructure, Bangalore, India, vol. 822, pp. 1-10, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Hemn Unis Ahmed, Azad A. Mohammed, and Ahmed S. Mohammed, “The Role of Nanomaterials in Geopolymer Concrete Composites: A State-of-the-Art Review,” Journal of Building Engineering, vol. 49, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Faris Matalkah, Ayman Ababneh, and Ruba Aqel, “Effects of Nanomaterials on Mechanical Properties, Durability Characteristics and Microstructural Features of Alkali-Activated Binders: A Comprehensive Review,” Construction and Building Materials, vol. 336, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[31] David W. Law et al., “Long Term Durability Properties of Class F Fly Ash Geopolymer Concrete,” Material and Structures, vol. 48, pp. 721-731, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Partha Sarathi Deb, Prabir Kumar Sarker, and Salim Barbhuiya, “Effects of Nano-Silica on the Strength Development of Geopolymer Cured at Room Temperature,” Construction and Building Materials, vol. 101, no. 1, pp. 675-683, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Pawel Sikora, Mohamed Abd Elrahman, and Dietmar Stephan, “The Influence of Nanomaterials on the Thermal Resistance of Cement-Based Composites-A Review,” Nanomaterials, vol. 8, no. 7, pp. 1-33, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[34] Morteza Bastami, Mazyar Baghbadrani, and Farhad Aslani, “Performance of Nano-Silica Modified High Strength Concrete at Elevated Temperatures,” Construction and Building Materials, vol. 68, pp. 402-408, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[35] Wang Yonggui et al., “Mechanical Properties and Microstructure of Basalt Fibre and Nano-Silica Reinforced Recycled Concrete after Exposure to Elevated Temperatures,” Construction and Building Materials, vol. 247, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[36] Faiz Shaikh, and Sharany Haque, “Effect of Nano Silica and Fine Silica Sand on Compressive Strength of Sodium and Potassium Activators Synthesised Fly Ash Geopolymer at Elevated Temperatures,” Fire and Materials, vol. 42, no. 3, pp. 324-335, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[37] Partha Sarathi Deb, Prabir Kumar Sarker, and Salim Barbhuiya, “Sorptivity and Acid Resistance of Ambient-Cured Geopolymer Mortars Containing Nano-Silica,” Cement and Concrete Composites, vol. 72, pp. 235-245, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[38] Achile Nana et al., “Mechanical Strength and Microstructure of Metakaolin/Volcanic Ash-Based Geopolymer Composites Reinforced with Reactive Silica from Rice Husk Ash,” Materialia, vol. 16, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[39] Jinyun Xu et al., “Research and Application Progress of Geopolymers in Adsorption: A Review,” Nanomaterials, vol. 12, no. 17, pp. 1-23, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[40] Wyom Paul Zakka, Nor Hasanah Abdul Shukor Lim, and Ma Chau Khun, “A Scientometric Review of Geopolymer Concrete,” Journal of Cleaner Production, vol. 280, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[41] B. Singh et al., “Geopolymer Concrete: A Review of Some Recent Developments,” Construction and Building Materials, vol. 85, pp. 78-90, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[42] Andrés Játiva, Evelyn Ruales, and Miren Etxeberria, “Volcanic Ash as a Sustainable Binder Material: An Extensive Review,” Materials, vol. 14, no. 5, pp. 1-32, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[43] Dali Bondar et al., “Effect of Type, form, and Dosage of Activators on Strength of Alkali-Activated Natural Pozzolans,” Cement and Concrete Composites, vol. 33, no. 2, pp. 251-260, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[44] Sharayu Shamarao Satpute, M.N. Shirsath, and Sandeep L. Hake, “Investigation of Alkaline Activators for Fly-Ash Based Geo- Polymer Concrete,” International Journal of Advance Research and Innovative Ideas in Education, vol. 2, no. 5, pp. 2395-4396, 2016.
[Google Scholar] [Publisher Link]
[45] R.H. Abdul Rahim et al., “Comparison of Using NaOH and KOH Activated Fly Ash-Based Geopolymer on the Mechanical Properties,” Materials Science Forum, vol. 803, pp. 179-184, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[46] Juhyuk Moon et al., “Characterization of Natural Pozzolan-Based Geopolymeric Binders,” Cement and Concrete Composites, vol. 53, pp. 97-104, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[47] Thais da Silva Rocha et al., “Metakaolin-Based Geopolymer Mortars with Different Alkaline Activators (Na+ and K+),” Construction and Building Materials, vol. 178, pp. 453-461, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[48] C.D. Budh, and N.R. Warhade, “Effect of Molarity on Compressive Strength of Geopolymer Mortar,” International Journal of Civil Engineering Research, vol. 5, no. 1, pp. 83-86, 2014.
[Google Scholar] [Publisher Link]
[49] Jun Zhao et al., “Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature,” Polymers, vol. 13, no. 9, pp. 1-26, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[50] William Gustavo Valencia Saavedra, and Ruby Mejía de Gutiérrez, “Performance of Geopolymer Concrete Composed of Fly Ash after Exposure to Elevated Temperatures,” Construction and Building Materials, vol. 154, pp. 229-235, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[51] Hai Yan Zhang et al., “Thermal Behavior and Mechanical Properties of Geopolymer Mortar after Exposure to Elevated Temperatures,” Construction and Building Materials Journal, vol. 109, pp. 17-24, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[52] Patrick N. Lemougna, Kenneth J.D. MacKenzie, and U.F. Chinje Melo, “Synthesis and Thermal Properties of Inorganic Polymers (Geopolymers) for Structural and Refractory Applications from Volcanic Ash,” Ceramics International, vol. 37, no. 8, pp. 3011-3018, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[53] Özge Topal, Mehmet Burhan Karakoç, and Ahmet Özcan, “Effects of Elevated Temperatures on the Properties of Ground Granulated Blast Furnace Slag (GGBFS) Based Geopolymer Concretes Containing Recycled Concrete Aggregate,” European Journal of Environmental and Civil Engineering, vol. 26, no. 10, pp. 4847-4862, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[54] Neetu Singh et al., “Effect of Aggressive Chemical Environment on Durability of Green Geopolymer Concrete,” International Journal of Engineering and Innovative Technology, vol. 3, no. 4, pp. 277-284, 2013.
[Google Scholar] [Publisher Link]
[55] Shoroog Alraddadi, and Hasan Assaedi, “Characterization and Potential Applications of Different Powder Volcanic Ash,” Journal of King Saud University- Science, vol. 32, no. 7, pp. 2969-2975, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[56] Patrick N. Lemougna et al., “Review on the Use of Volcanic Ashes for Engineering Applications,” Resources, Conservation & Recycling, vol. 137, pp. 177-190, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[57] F.N. Okoye, J. Durgaprasad, and N.B. Singh, “Fly Ash/Kaolin Based Geopolymer Green Concretes and their Mechanical Properties,” Data in Brief, vol. 5, pp. 739-744, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[58] Rossibel Churata et al., “Study of Geopolymer Composites Based on Volcanic Ash, Fly Ash, Pozzolan, Metakaolin and Mining Tailing,” Buildings, vol. 12, no. 8, pp. 1-12, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[59] H.K. Tchakoute et al., “Utilization of Volcanic Ashes for the Production of Geopolymers Cured at Ambient Temperature,” Cement and Concrete Composites, vol. 38, pp. 75-81, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[60] ASTM 618-08, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, American Society for Testing and Materials, 2008.
[Google Scholar] [Publisher Link]
[61] Aleksandar Nikolov, Ivan Rostovsky, and Henk Nugteren, “Geopolymer Materials Based on Natural Zeolite,” Case Studies in Construction Materials, vol. 6, pp. 198-205, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[62] Taewan Kim, Jae Hong Kim, and Yubin Jun, “Properties of Alkali-Activated Slag Paste Using New Colloidal Nano-Silica Mixing Method,” Materials, vol. 12, no. 9, pp. 1-22, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[63] R. Kumar, S. Singh, and L.P. Singh, “Studies on Enhanced Thermally Stable High Strength Concrete Incorporating Silica Nanoparticles,” Construction and Building Materials, vol. 153, pp. 506-513, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[64] ASTM C128, ASTM C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate, ASTM: West Conshohocken, 2015.
[Google Scholar] [Publisher Link]
[65] ASTM C33/C33M-08, Standard Specification for Concrete Aggregates, American Society for Testing and Materials, pp. 1-11, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[66] Jean Noël Yankwa Djobo et al., “Mechanical Properties and Durability of Volcanic Ash Based Geopolymer Mortars,” Construction and Building Materials, vol. 124, pp. 606-614, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[67] Fatih Kantarcı, İbrahim Türkmen, and Enes Ekinci, “Optimization of Production Parameters of Geopolymer Mortar and Concrete: A Comprehensive Experimental Study,” Construction and Building Materials, vol. 228, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[68] Hasan Assaedi et al., “Effect of Nanosilica on Mechanical Properties and Microstructure of PVA Fiber-Reinforced Geopolymer Composite (PVA-FRGC),” Materials, vol. 12, no. 21, pp. 1-11, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[69] ASTM C1437-20, Standard Test Method for Flow of Hydraulic Cement Mortar, American Society for Testing and Materials, pp. 1-2, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[70] Muhammad Talha Junaid, Amar Khennane, and Obada Kayali, “Investigation into the Effect of the Duration of Exposure on the Behaviour of GPC at Elevated Temperatures,” MATEC Web of Conferences, vol. 11, pp. 1-5, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[71] Rui He, Nan Dai, and Zhenjun Wang, “Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review,” Advances in Civil Engineering, vol. 2020, pp. 1-17, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[72] ASTM C109/C109M-08, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), American Society for Testing and Materials, pp. 1-9, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[73] Nima Farzadnia et al., “The Effect of Nano Silica on Short-Term Drying Shrinkage of POFA Cement Mortars,” Construction and Building Materials, vol. 95, pp. 636-646, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[74] X. Gao, Q.L. Yu, and H.J.H. Brouwers, “Characterization of Alkali Activated Slag-Fly Ash Blends Containing Nano-Silica,” Construction and Building Materials, vol. 98, pp. 397-406, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[75] Ali Akbar Ramezanianpour, and Mohammad Amin Moeini, “Mechanical and Durability Properties of Alkali Activated Slag Coating Mortars Containing Nanosilica and Silica Fume,” Construction and Building Materials, vol. 163, pp. 611-621, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[76] Elzbieta Horszczaruk et al., “The Effect of Elevated Temperature on the Properties of Cement Mortars Containing Nanosilica and Heavyweight Aggregates,” Construction and Building Materials, vol. 137, pp. 420-431, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[77] M.R. Karim et al., “Development of a Zero-Cement Binder Using Slag, Fly Ash, and Rice Husk Ash with Chemical Activator,” Advances in Materials Science and Engineering, vol. 2015, pp. 1-15, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[78] Mohsen Jafari Nadoushan, and Ali Akbar Ramezanianpour, “The Effect of Type and Concentration of Activators on Flowability and Compressive Strength of Natural Pozzolan and Slag-Based Geopolymers,” Construction and Building Materials, vol. 111, pp. 337-347, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[79] Hemn Unis Ahmed et al., “Compressive Strength of Geopolymer Concrete Modified with Nano-Silica: Experimental and Modeling Investigations,” Case Studies in Construction Materials, vol. 16, pp. 1-29, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[80] Ilknur Bekem Kara, “The Effect of Nano Silica on the Properties of Cement Mortars Containing Micro Silica at Elevated Temperatures,” Romanian Journal of Materials, vol. 49, no. 4, pp. 518-526, 2019.
[Google Scholar] [Publisher Link]
[81] M. Komljenović, Z. Baščarević, and V. Bradić, “Mechanical and Microstructural Properties of Alkali-Activated Fly Ash Geopolymers,” Journal of Hazardous Materials, vol. 181, no. 1-3, pp. 35-42, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[82] D.J. Ilham et al., “Utilization of Volcanic Ashes for Geopolymer Based on Alkaline Activator and Solid-Liquid Ratio,” IOP Conference Series: Earth and Environmental Science, 2nd International Conference on Disaster and Management, Indonesia, vol. 708, no. 1, pp. 1-6, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[83] Zihui Peng, “Microstructural and 29 Si MAS NMR Spectroscopic Evaluations of Alkali Cationic Effects on Fly Ash Activation,” Cement and Concrete Composites, vol. 57, pp. 34-43, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[84] Seick Omar Sore et al., “Comparative Study on Geopolymer Binders Based on Two Alkaline Solutions (NaOH and KOH),” Journal of Minerals and Materials Characterization and Engineering, vol. 8, no. 6, pp. 407-420, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[85] F.N. Okoye, J. Durgaprasad, and N.B. Singh, “Mechanical Properties of Alkali Activated Flyash/Kaolin Based Geopolymer Concrete,” Construction and Building Materials, vol. 98, pp. 685-691, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[86] Lais Alves, Nordine Leklou, and Silvio De Barros, “A Comparative Study on the Effect of different Activating Solutions and Formulations on the Early Stage Geopolymerization Process,” Matec Web of Conferences, vol. 322, pp. 1-13, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[87] Y. Luna-Galiano et al., “Properties of Fly Ash and Metakaolín Based Geopolymer Panels under Fire Resistance Tests,” Construction Materials, vol. 65, no. 319, pp. 1-13, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[88] İbrahim Türkmen et al., “Fire Resistance of Geopolymer Concrete Produced from Elazığ Ferrochrome Slag,” Fire and Materials, vol. 40, no. 6, pp. 836-847, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[89] F.U.A. Shaikh, and V. Vimonsatit, “Compressive Strength of Fly-Ash-Based Geopolymer Concrete at Elevated Temperatures,” Fire and Materials, vol. 39, no. 2, pp. 174-188, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[90] Mukund Lahoti et al., “Effect of Alkali Cation Type on Strength Endurance of Fly Ash Geopolymers Subject to High Temperature Exposure,” Materials and Design, vol. 154, pp. 8-19, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[91] Patrick N. Lemougna et al., “Influence of the Activating Solution Composition on the Stability and Thermo-Mechanical Properties of Inorganic Polymers (Geopolymers) from Volcanic Ash,” Construction and Building Materials, vol. 48, pp. 278-286, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[92] R. Anjusha, and S. Bindu, “Influence of Nanosilica on Properties of Ternary Blended Concrete,” International Journal of Science & Engineering Research, vol. 5, no. 7, pp. 575-582, 2014.
[Google Scholar] [Publisher Link]
[93] T. Bakharev, “Thermal Behaviour of Geopolymers Prepared Using Class F Fly Ash and Elevated Temperature Curing,” Cement and Concrete Research, vol. 36, no. 6, pp. 1134-1147, 2006.
[CrossRef] [Google Scholar] [Publisher Link]
[94] K. Zulkifly et al., “Review of Geopolymer Behaviour in Thermal Environment,” IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Research - ICIR Euroinvent, Iasi, Romania vol. 209, pp. 1-9, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[95] K.M. Klima et al., “Enhancing the Thermal Performance of Class F Fly Ash-Based Geopolymer by Sodalite,” Construction and Building Materials, vol. 314, pp. 1-13, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[96] Faiz Uddin Ahmed Shaikh, Sharany Haque, and Jay Sanjayan, “Behavior of Fly Ash Geopolymer as Fire Resistant Coating for Timber,” Journal of Sustainable Cement-Based Materials, vol. 8, no. 5, pp. 259-274, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[97] Rafia Firdous, Dietmar Stephan, and Jean Noël Yankwa Djobo, “Natural Pozzolan Based Geopolymers: A Review on Mechanical, Microstructural and Durability Characteristics,” Construction and Building Materials, vol. 190, pp. 1251-1263, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[98] Ali Nazari et al., “Thermal Shock Reactions of Ordinary Portland Cement and Geopolymer Concrete: Microstructural and Mechanical Investigation,” Construction and Building Materials, vol. 196, pp. 492-498, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[99] Faiz Uddin Ahmed Shaikh, “Effects of Slag Content on the Residual Mechanical Properties of Ambient Air-Cured Geopolymers Exposed to Elevated Temperatures,” Journal of Asian Ceramic Societies, vol. 6, no. 4, pp. 342-358, 2018.
[CrossRef] [Google Scholar] [Publisher Link