Study on Cold Forging Process Design for Automotive Components of Al 6061 Alloys

Study on Cold Forging Process Design for Automotive Components of Al 6061 Alloys

  IJETT-book-cover           
  
© 2024 by IJETT Journal
Volume-72 Issue-5
Year of Publication : 2024
Author : Sung-Nam Park, Jyun-Pyo Hong, Jung-Woo Song, Jong-Hun Kang
DOI : 10.14445/22315381/IJETT-V72I5P112

How to Cite?

Sung-Nam Park, Jyun-Pyo Hong, Jung-Woo Song, Jong-Hun Kang, "Study on Cold Forging Process Design for Automotive Components of Al 6061 Alloys," International Journal of Engineering Trends and Technology, vol. 72, no. 5, pp. 113-119, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I5P112

Abstract
The present study was conducted to develop forgings for automobiles by increasing the cold forging formability of the Al6061 material. Heat treatment was performed at the temperatures of 350°C, 375°C, 400°C, 425°C, 450°C, 475°C, and 500°C to evaluate the formability of the raw material depending on the heat treatment conditions. Tensile test specimens were prepared for each heat treatment condition, and their tensile strength, yield strength, and elongation were measured through a tensile test. The test results showed that the maximum elongation and the minimum yield strength, indicative of the highest formability, were found at 400°C. The flow stress and fracture damage were calculated by using the displacement-load relationship obtained from the tensile test. Multi-stage forging process was designed, and forming process analysis was performed. In the forming analysis of products with a large flange and a small thickness, a value equal to or less than the limiting damage was predicted. A prototype forming was performed through the designed forging process, and as predicted by the finite element analysis, no forging defect occurred. It was confirmed that in the forging process with a large amount of deformation, forming limits can be increased through heat treatment of raw materials, and defects can be avoided.

Keywords
Aluminum alloys, Annealing treatment, Flow stress, Cold forging, Forging defects, Finite element analysis.

References
[1] John Gilbert Kaufman, Introduction to Aluminum Alloys and Tempers, ASM International, pp.87-118, 2000.
[Google Scholar] [Publisher Link]
[2] S.V.S. Narayana Murty, B. Nageswara Rao, and B.P. Kashyap, “Improved Ductile Fracture Criterion for Cold Forming of Spheroidised Steel,” Journal of Materials Processing Technology, vol. 147, no. 1, pp. 94-101, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[3] J.J.V. Jeyasingh, B. Nageswara Rao, and A. Chennakesava Reddy, “Development of a Ductile Fracture Criterion in Cold Forming,” Materials Sciences Research Journal, vol. 2, no. ¾, pp. 191-206, 2008.
[Google Scholar] [Publisher Link]
[4] Hossein Talebi-Ghadikolaee et al., “Fracture Analysis on U-bending of AA6061 Aluminum Alloy Sheet Using Phenomenological Ductile Fracture Criteria,” Thin-Walled Structures, vol. 148, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Aditya H. Naronikar et al., “Optimizing the Heat Treatment Parameters of Al-6061 Required for Better Formability,” Materials Today: Proceedings, vol. 5, no. 2, pp. 24240-24247, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[6] V. Monica et al., “An Experimental Analysis and Optimization of Heat Treatment Parameters of Al6061 Alloy for Improved Mechanical Properties,” International Journal of Mechanical and Production Engineering Research and Development, vol. 9, pp. 46-59, 2019.
[Google Scholar]
[7] Fubao Zhang et al., “Optimization of AlSi10MgMn Alloy Heat Treatment Process Based on Orthogonal Test and Grey Relational Analysis,” Crystals, vol. 11, no. 4, pp. 1-12, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Kevin Anderson, John Weritz, and J. Gilbert Kaufman, Properties and Selection of Aluminum Alloys, ASM International, pp. 394-397, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[9] D. Maisonnette et al., “Effects of Heat Treatments on the Microstructure and Mechanical Properties of 6061 Aluminum Alloy,” Materials Science and Engineering: A, vol. 528, no. 6, pp. 2718-2724, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Woei-Shyan Lee, and Zih-Chao Tang, “Relationship between Mechanical Properties and Microstructural Response of 6061-T6 Aluminum Alloy Impacted at Elevated Temperatures,” Materials & Design, vol. 58, pp. 116-124, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[11] A. Rafey Khan et al., “Reducing Residual Stresses for Optimal Machining of AA-6061 (T-6) Alloy Through Re-Heating Technique,” Materials Science and Technology, vol. 33, no. 6, pp. 731-737, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[12] ManSoo Joun, Jea Gun Eom, and Min Cheol Lee, “A New Method for Acquiring True Stress–Strain Curves Over a Large Range of Strains Using a Tensile Test and Finite Element Method,” Mechanics of Materials, vol. 40, no. 7, pp. 586-593, 2008.
[CrossRef] [Google Scholar] [Publisher Link]