Analysis of Battery-based and Direct Current Generator Drone Power System

Analysis of Battery-based and Direct Current Generator Drone Power System

  IJETT-book-cover           
  
© 2024 by IJETT Journal
Volume-72 Issue-5
Year of Publication : 2024
Author : Muhd Hazman Hanafi, M. Zulafif Rahim, Haris Hamizan Hamzah, Fathan Fadzulli, Omar Mohd Faizan Marwah, Zamri Omar, Rasidi Ibrahim, Juita Mastura Mohd Saleh
DOI : 10.14445/22315381/IJETT-V72I5P122

How to Cite?

Muhd Hazman Hanafi, M. Zulafif Rahim, Haris Hamizan Hamzah, Fathan Fadzulli, Omar Mohd Faizan Marwah, Zamri Omar, Rasidi Ibrahim, Juita Mastura Mohd Saleh, "Analysis of Battery-based and Direct Current Generator Drone Power System," International Journal of Engineering Trends and Technology, vol. 72, no. 5, pp. 216-226, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I5P122

Abstract
Conventional power sources for Unmanned Aerial Vehicles (UAVs) are primarily battery-based. However, tethered drones represent a unique establishment from the norm, which will ensure a continuous power supply and data connection. Throughout this unique attribution it is highly suitable for protracted surveillance operations for inaccessible maintenance areas, vigilant oversight of populous events, systematically examining critical infrastructure, and rapidly assessing disaster-stricken areas with real-time aerial perspectives. Nonetheless, it is essential to note that their operational range is significantly limited compared to the untethered UAV, and they possess inherent mobility constraints. Development of a tethered drone is challenging as the suitable motor should be selected appropriately to ensure the energy produced by the DC Generator can provide enough energy to generate the required motor performance. In this research, performance analysis was conducted to understand the differences in electrical characteristics between the battery-based power supply and the developed DC Generator and their impact on the thrust performance of the drone. The experimental study was conducted using several power systems: 4S 100C Battery-based, 4S 75C Battery-based, 3S 25C Battery-based, 3S 5C Battery-based, and DC Generator. The electrical properties of the power provided through a tethered source differ from those of a battery-based power supply. The research noted a significant influence of battery cell count and c-rating on the thrust produced. The highest thrust was recorded at 48.02N for a 4S battery and 36.98N for a 3S battery; interestingly, the study revealed that applying the same voltage as the 4S and 3S batteries to the DC Generator did not yield a similar thrust. To achieve comparable performance to the battery-based system, a higher voltage input was necessary. The research observed that the battery-based system generally had a lower voltage-to-current ratio compared to the DC Generator system. Specifically, a 2.3 times lower ratio was observed between the 3S battery and the DC Generator while maintaining similar thrust levels.

Keywords
Tethered drone, Unmanned Aerial Vehicle (UAV), Quadrotor, Power characteristics, Thrust testing.

References
[1] Gopal Dutta, and Purba Goswami, “Application of Drone in Agriculture: A Review,” International Journal of Chemical Studies, vol. 8, no. 5, pp. 181-187, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Mohamed Nadir Boukoberine, Zhibin Zhou, and Mohamed Benbouzid, “Power Supply Architectures For Drones-A Review." IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, pp. 5826-5831, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Ganchimeg Battsengel, Selvaraj Geetha, and Jeonghwan Jeon, “Analysis of Technological Trends and Technological Portfolio of Unmanned Aerial Vehicle,” Journal of Open Innovation: Technology, Market, and Complexity, vol. 6, no. 3, pp. 1-14, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Mohamed Nadir Boukoberine, Zhibin Zhou, and Mohamed Benbouzid, “A Critical Review on Unmanned Aerial Vehicles Power Supply and Energy Management: Solutions, Strategies, and Prospects,” Applied Energy, vol. 255, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Ashleigh Townsend et al., “A Comprehensive Review of Energy Sources for Unmanned Aerial Vehicles, their Shortfalls and Opportunities for Improvements,” Heliyon, vol. 6, no. 11, pp. 1-9, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Pei-Hsiang Chung, Der-Ming Ma, and Jaw-Kuen Shiau, “Design, Manufacturing, and Flight Testing of an Experimental Flying Wing UAV,” Applied Sciences, vol. 9, no. 15, pp. 1-22, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Vinh Nguyen Duy, and Hyung-Man Kim, “Review on the Hybrid-Electric Propulsion System and Renewables and Energy Storage for Unmanned Aerial Vehicles,” International Journal of Electrochemical Science, vol. 15, no. 6, pp. 5296-5319, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Bowen Zhang et al., “Overview of Propulsion Systems for Unmanned Aerial Vehicles,” Energies, vol. 15, no. 2, pp. 1-25, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Dmitry Bershadsky, Steve Haviland, and Eric N. Johnson, “Electric Multirotor UAV Propulsion System Sizing for Performance Prediction and Design Optimization,” 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Magdi S. Mahmoud, Mojeed O. Oyedeji, and Yuanqing Xia, “Chapter 10 - Path Planning in Autonomous Aerial Vehicles,” Advanced Distributed Consensus for Multiagent Systems, pp. 331-362, 2021.
[CrossRef] [Publisher Link]
[11] Kai-Hung Chang, and Shao-Kang Hung, “Design and Implementation of a Tether‐Powered Hexacopter for Long Endurance Missions,” Applied Sciences, vol. 11, no. 24, pp. 1-13, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Giulio Avanzini, Emanuele L. de Angelis, and Fabrizio Giulietti, “Optimal Performance and Sizing of a Battery-Powered Aircraft,” Aerospace Science and Technology, vol. 59, pp. 132-144, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Andreas Eitel et al., “Multimodal Deep Learning for Robust RGB-D Object Recognition,” 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Hamburg, Germany, pp. 681-687, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[14] G. Maarten Bonnema, Gerrit Muller, and Lisette Schuddeboom, “Electric Mobility and Charging: Systems of Systems and Infrastructure Systems." 2015 10th System of Systems Engineering Conference (SoSE), San Antonio, TX, USA, pp. 59-64, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Simone Barcellona et al., “Analysis of Ageing Effect on Li-Polymer Batteries,” The Scientific World Journal, vol. 2015, pp. 1-8, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[16] William R. Palmer, Daniel L. Schlig, and Timothy F. Mclellan, “Tethered Unmanned Aerial Vehicle,” U.S. Patent No. 10,065,738 B2, pp. 1-19, 2018.
[Google Scholar] [Publisher Link]
[17] Wojciech Walendziuk, Piotr Falkowski, and Krzysztof Kulikowski, “The Analysis of Power Supply Topologies for Tethered Drone Applications,” Proceedings, vol. 51, no. 1, pp. 1-4, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[18] H. Qiao, and Q. Wei, “10- Functional Nanofibers in Lithium-Ion Batteries,” Functional Nanofibers and their Applications, pp. 197-208, 2012.
[CrossRef] [Google Scholar] [Publisher Link]