Development of Drilling and Blasting Technology for the Destruction of Watered Fractured Rocks by Borehole Charges
Development of Drilling and Blasting Technology for the Destruction of Watered Fractured Rocks by Borehole Charges |
||
 |
 |
|
| © 2024 by IJETT Journal | ||
| Volume-72 Issue-7 |
||
| Year of Publication : 2024 | ||
| Author : Zhanibek Seitov |
||
| DOI : 10.14445/22315381/IJETT-V72I7P110 | ||
How to Cite?
Zhanibek Seitov, "Development of Drilling and Blasting Technology for the Destruction of Watered Fractured Rocks by Borehole Charges," International Journal of Engineering Trends and Technology, vol. 72, no. 7, pp. 95-103, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I7P110
Abstract
The purpose of this study is to develop an effective drilling and blasting technology that will improve the productivity and safety of blasting operations during the construction or development of rocks. The study describes the examination of the Kariernoie gold deposit in Kazakhstan using geological and mining methods and materials, including analysis of the gold content in ores, assessment of the capacities of ore bodies, determination of the chemical composition of the ore, and conducting studies to optimise the extraction process. The productivity of the equipment and personnel involved is substantially reduced, and the cost of rock excavation and preparation for explosion increases. Hydrogeology manifests itself in the selection of various explosive materials, the justification of charging methods and methods of forming charges in boreholes, and the choice of technical means and technical measures to reduce the negative consequences of waterlogging. In some cases, the removal of water from the well can reduce the water level in a relatively short time. Therewith, there are explosive blocks where the flow of water into the well is comparable to the performance of a pump of special equipment for pumping water, and the decision to use special equipment for pumping water is clearly impractical. The development of an effective drilling and blasting technology is of high practical importance for the oil and gas industry, as it can increase the productivity and safety of workers and reduce the cost of good operation, which is an urgent problem in this industry.
Keywords
Blasting operations, Contour blasting, Ecology, Emissions into the atmospheric air, Environmental protection, Water pumping equipment.
References
[1] M. Borovyk, A. Vovk, and M. Gordijchuk, “Colmatating of Productive Gas Formations while Drilling Wells with Abnormally Lower Hydrostatic Pressures,” Prospecting and Development of Oil and Gas Fields, vol. 21, no. 4, pp. 16-23, 2021.
[CrossRef] [Publisher Link]
[2] Annaguly Deryaev, “Dual Completion Operation Technology for Two Gas Condensate Reservoirs with Production Lifting by One Column of Pumping and Compressor Pipes,” Machinery & Energetics, vol. 14, no. 4, pp. 33-41, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[3] E. A. Kravtsova, “Minimization of Dust Emission During Drilling and Blasting Operations in Open Pits Using Hydraulic Ramming of Wells in Central Kazakhstan,” Mining Information and Analytical Bulletin, vol. 12, pp. 23-26, 2016.
[Publisher Link]
[4] V.A. Malashkina, and E.A. Kravtsova, “Dust Emission Control Methods in Drilling and Blasting at Open Pit Mines in winter in Central Kazakhstan,” Mining Information and Analytical Bulletin, vol. 5, pp. 318-322, 2017.
[Publisher Link]
[5] M. S. Anufrik, “Issues Of Ensuring Safety During Drilling Operations In The Republic Of Kazakhstan,” Student Science: Current Issues, Achievements and Innovation, pp. 60-63, 2022.
[Google Scholar] [Publisher Link]
[6] A. Kotyashev, and V. G. Shemenev, “Approbation of Technology for the Destruction of Rock Massifs Using Dispersed Charges,” Mining Journal of Kazakhstan, vol. 7, pp. 30-34, 2015.
[Publisher Link]
[7] K.T. Atageldiev, and M. B. Baizbaev, “Multi-Ray Short-Delay Blasting Of Borehole Charges In Step-Breaking Conditions,” Innovative Technologies for the Development of Mineral Deposits, pp. 57-64, 2019.
[Google Scholar] [Publisher Link]
[8] S. Kabidenova, “Improvement of Drilling and Explosion Works on the Limit Contour of the Quarry,” International Scientific Journal – Science Bulletin,” vol. 2, no. 35, pp. 83-86, 2021.
[Google Scholar] [Publisher Link]
[9] Jambyl Region, Working Project for the Development of Reserves of the Karyerny Site of JSC AK Altynalmas by Open-Pit Mining, Located in the Zhambyl Region, Kariernoie, 2006. [Online]. Available: https://antal.kz/ru/nashi-proekty/item/43-mestorozhdenie-karernoe.html
[10] LiDong YU et al., “Hydrothermal Alteration and Migration of Elements in the Yufeng Gold Deposit of the Eastern Tienshan Orogen,” Acta Petrologica Sinica, vol. 36, no. 5, pp. 1597-1610, 2020.
[CrossRef] [Publisher Link]
[11] Dalibor Serafimovski, Goran Tasev, and Ivan Boev, “Access Database for the Cukar 2 East Ore Body Buchim Mine, Republic of North Macedonia,” Knowledge – International Journal, vol. 51, no. 3, pp. 443-449, 2022.
[Google Scholar] [Publisher Link]
[12] Abdelmjeed Mohamed, Saeed Salehi, and Ramadan Ahmed, “Significance and Complications of Drilling Fluid Rheology in Geothermal Drilling: A Review,” Geothermics, vol. 93, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[13] F.Y. Umarov et al., “Development of an Innovative Technology for Drilling and Blasting with Downhole Explosive Charges of Directional Action of Detonation Products Using the Cumulative Effect,” Academic Research in the Educational Sciences, vol. 1, no. 1, pp. 233-243, 2020.
[Publisher Link]
[14] Zhen Liu et al., “Lead-free (Ag,K)NbO3 Materials for High-Performance Explosive Energy Conversion,” Science Advances, vol. 6, no. 21, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Santosh Kumar Ray et al., “A Review of Preventive and Constructive Measures to Prevent Explosions in Coal Mines: An Indian Perspective,” International Journal of Mining Science and Technology, vol. 32, no. 3, pp. 471-485, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Hengzhong Zhu, and Huajun Wang, “Case Study on Pre-Splitting Blasting Reasonable Parameters of Goaf-Side Entry Retained by Roof Cutting for Hard Main Roof,” Processes, vol. 11, no. 2, pp. 1-18, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Abubakar Sharafat et al., “BIM-Based Tunnel Information Modeling Platform for Visualization, Management and Simulation of Drilling and Blasting Projects,” Journal of Computing in Civil Engineering, vol. 35, no. 2, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[18] E.I. Kryzhanivskyi, and D.O. Panevnyk, “The Improvement of the Mathematical Model of the Work Process of Borehole Ejection Systems,” Prospecting and Development of Oil and Gas Fields, vol. 20, no. 1, pp. 36-44, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Mahdi Shadabfar et al., “Probabilistic Modeling of Excavation-Induced Damage Depth around Rock-Excavated Tunnels,” Results in Engineering, vol. 5, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Yerzhan Uteshov et al., “The Potential for Increasing the Efficiency of Design Processes for the Development of Solid Mineral Deposits Based on Digitalization and Advanced Analytics,” Mining Development, vol. 15, no. 2, pp. 102-110, 2021.
[Google Scholar] [Publisher Link]
[21] Jan Feher et al., “Research of the Technical Seismicity due to Blasting Works in Quarries and their Impact on the Environment and Population,” Applied Sciences, vol. 11, no. 5, pp. 1-21, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Rachel E. Abercrombie, “Resolution and Uncertainties in Estimates of Voltage Drop and Energy Release during an Earthquake,” Philosophical Transactions of the Royal Society A, vol. 379, no. 1-32, 2021.
[Google Scholar] [Publisher Link]
[23] Ming Chen et al., “The Movement Process and Length Optimization of Deep-Hole Blasting Stemming Structure,” International Journal of Rock Mechanics and Mining Sciences, vol. 146, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Murtada Saleh Aljawad et al., “Improving Carbonate Rock Hardness by Consolidating Additives to Sustain Long Term Fracture Conductivity,” Journal of Petroleum Science and Engineering, vol. 195, 2020.
[CrossRef] [Google Scholar] [Publisher Link]