Development and Characterization of Mechanical and Acoustic Properties of a Corn Husk/Fly Ash Hybrid Composite Board
Development and Characterization of Mechanical and Acoustic Properties of a Corn Husk/Fly Ash Hybrid Composite Board |
||
 |
 |
|
| © 2024 by IJETT Journal | ||
| Volume-72 Issue-9 |
||
| Year of Publication : 2024 | ||
| Author : N. Z. Nkomo, A. A. Alugongo |
||
| DOI : 10.14445/22315381/IJETT-V72I9P135 | ||
How to Cite?
N. Z. Nkomo, A. A. Alugongo, "Development and Characterization of Mechanical and Acoustic Properties of a Corn Husk/Fly Ash Hybrid Composite Board," International Journal of Engineering Trends and Technology, vol. 72, no. 9, pp. 384-389, 2024. Crossref, https://doi.org/10.14445/22315381/IJETT-V72I9P135
Abstract
This study focuses on the development of an acoustic hybrid composite that will be used as a sound absorber using corn husks obtained from maize, fly ash from coal and polyester resin. Corn husks were pre-treated using 5% hydroxide before being used in the fabrication of the composite, and fly ash was only moistened using distilled water. The fabrication of the composite was carried out using the hand-laying method. Three different samples were fabricated, with sample A having 30% corn husks, 20% fly ash, and 50% polyester resin, sample B with an equal ratio of corn husk and fly ash of 25% and polyester being 50%. Sample C has 20% corn husks, 30% fly ash, and 50% polyester resins. These percentages were in terms of mass fractions. Different tests were carried out, including sound absorption test, compression strength test, flexural strength test and water absorption test. Both the fabricated samples showed good sound absorbance, with good results obtained from the one with a high mass fraction of corn husk.
Keywords
Composite, Corn husk, Fly ash, Mechanical strength, Flexural Strength.
References
[1] Shibly Shadik Mir Md, Ming Yeng Chan, and Seong Chun Koay, “Mechanical Properties of Polyester/Corn Husk Fibre Composite Produced Using Vacuum Infusion Technique,” Polymers and Polymer Composites, vol. 29, no. S9, pp. S1532-S1540, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[2] H.M. Akil et al., “Kenaf Fiber Reinforced Composites: A Review,” Materials & Design, vol. 32, no. 8-9, pp. 4107-4121, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Ch’ng Zhin Pao, and Chan Ming Yeng, “Properties and Characterization of Wood Plastic Composites Made from Agro-Waste Materials and Post-Used Expanded Polyester Foam,” Journal of Thermoplastic Composite Materials, vol. 32, no. 7, pp. 951-966, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Koay S. Chun et al., “Wood Plastic Composites Made From Corn Husk Fiber and Recycled Polystyrene Foam,” Journal of Engineering Science and Technology, vol. 13, no. 11, pp. 3445-3456, 2018.
[Google Scholar] [Publisher Link]
[5] Kuhananthan Nanthakumar, Chan Ming Yeng, and Koay Seong Chun, “Tensile and Water Absorption Properties of Solvent Cast Biofilms of Sugarcane Leaves Fibre-Filled Poly(Lactic) Acid,” Journal of Thermoplastic Composite Materials, vol. 33, no. 3, pp. 289-304, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[6] N.B. Karthik Babu et al., “Thermal and Mechanical Behavior of the Coir Powder Filled Polyester Micro-Composites,” Journal of Natural Fibers, vol. 17, no. 7, pp. 1058-1068, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Xue Li, Lope G. Tabil, and Satyanarayan Panigrahi, “Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review,” Journal of Polymers and the Environment, vol. 15, pp. 25-33, 2007.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Özer Sevim, and İlhami Demir, “Optimization of Fly Ash Particle Size Distribution for Cementitious Systems with High Compactness,” Construction and Building Materials, vol. 195, pp. 104-114, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Indrek Külaots, Robert H. Hurt, and Eric M. Suuberg, “Size Distribution of Unburned Carbon in Coal Fly Ash and its Implications,” Fuel, vol. 83, no. 2, pp. 223-230, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[10] N. Gamage et al., “Overview of Different Types of Fly Ash and their Use as a Building and Construction Material,” International Conference of Structural Engineering, Construction and Management, Kandy, Sri Lanka, 2011.
[Google Scholar]
[11] Yi-Wen Shen et al., “Insight of the Size Dependent Bioavailability and Health Risk Assessment of Arsenic in Resuspended Fly Ash from Power Plants,” Fuel, vol. 327, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Yi Chen et al., “A Comprehensive Review of Toxicity of Coal Fly Ash and its Leachate in the Ecosystem,” Ecotoxicology and Environmental Safety, vol. 269, pp. 1-16, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Chan Ming Yeng, Salmah Husseinsyah, and Sam Sung Ting, “A Comparative Study of Different Crosslinking Agent-Modified Chitosan/Corn Cob Biocomposite Films,” Polymer Bulletin, vol. 72, pp. 791-808, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Nasmi Herlina Sari et al., “Corn Husk Fiber-Polyester Composites as Sound Absorber: Nonacoustical and Acoustical Properties,” Advances in Acoustics and Vibration, vol. 2017, no. 1, pp. 1-7, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Rozli Zulkifli, Zulkarnain, and Mohd Jailani Mohd Nor, “Noise Control Using Coconut Coir Fiber Sound Absorber with Porous Layer Backing and Perforated Panel,” American Journal of Applied Sciences, vol. 7, no. 2, pp. 260-264, 2010.
[Google Scholar] [Publisher Link]
[16] Zhangfeng Luo et al., “Comparison of Performances of Corn Fiber Plastic Composites Made from Different Parts of Corn Stalk,” Industrial Crops and Products, vol. 95, pp. 521-527, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Raymond Gentil Elenga et al., “Effects of Alkali Treatment on the Microstructure, Composition, and Properties of the Raffia Textilis Fiber,” BioResources, vol. 8, no. 2, pp. 2934-2949, 2013.
[Google Scholar] [Publisher Link]
[18] Min Zhi Rong et al., “The Effect of Fiber Treatment on the Mechanical Properties of Unidirectional Sisal-Reinforced Epoxy Composites,” Composites Science and Technology, vol. 61, no. 10, pp. 1437-1447, 2001.
[CrossRef] [Google Scholar] [Publisher Link]
[19] C.A. Boynard, S.N. Monteiro, and J.R.M. d'Almeida, “Aspects of Alkali Treatment of Sponge Gourd (Luffa Cylindrica) Fibers on the Flexural Properties of Polyester Matrix Composites,” Journal of Applied Polymer Science, vol. 87, no. 12, pp. 1927-1932, 2003.
[CrossRef] [Google Scholar] [Publisher Link]
[20] P. Ramesh, B. Durga Prasad, and K.L. Narayana, “Characterization of Kenaf Fiber and its Composites: A Review,” Journal of Reinforced Plastics and Composites, vol. 37, no. 11, pp. 731-737, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Z.Y. Lim et al., “Sound Absorption Performance of Natural Kenaf Fibres,” Applied Acoustics, vol. 130, pp. 107-114, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[22] N.H. Zunaidi et al., “Effect of Physical Properties of Natural Fibre on the Sound Absorption Coefficient,” Journal of Physics: Conference Series: International Conference on Applications and Design in Mechanical Engineering, Penang, Malaysia, vol. 908, no. 1, pp. 1-6, 2017.
[CrossRef] [Google Scholar] [Publisher Link]