Design and Implementation of a Maintenance Plan Based on Total Productive Maintenance in the Packaging of Chemical Products for the Agroindustrial Sector
Design and Implementation of a Maintenance Plan Based on Total Productive Maintenance in the Packaging of Chemical Products for the Agroindustrial Sector |
||
 |
 |
|
| © 2025 by IJETT Journal | ||
| Volume-73 Issue-11 |
||
| Year of Publication : 2025 | ||
| Author : Carlos Antonio Porras Guzmán, Fernando Sierra-Liñan | ||
| DOI : 10.14445/22315381/IJETT-V73I11P108 | ||
How to Cite?
Carlos Antonio Porras Guzmán, Fernando Sierra-Liñan,"Design and Implementation of a Maintenance Plan Based on Total Productive Maintenance in the Packaging of Chemical Products for the Agroindustrial Sector", International Journal of Engineering Trends and Technology, vol. 73, no. 11, pp.87-106, 2025. Crossref, https://doi.org/10.14445/22315381/IJETT-V73I11P108
Abstract
The main purpose of this research was to apply Total Productive Maintenance with the purpose of improving productivity in the Agroindustry company, whose economic activity consists of the manufacture of fertilizers, insecticides, and herbicides. For this purpose, Lean Manufacturing techniques were used, such as: The Ishikawa diagram facilitated the analysis and detection of the points that affect the lack of a standardized system and the demotivation of the personnel in the production area; likewise, the application of the 5S methodology allowed optimizing the organizational environment, and finally, Autonomous Maintenance was implemented as a strategy to improve the operational efficiency of the equipment. The modality of the study is applied, with an orientation towards the design, which is pre-experimental and explanatory level, with a sample of 218 participants by means of probabilistic sampling. As a result, the degree of productivity of the organization improved from 46.62% to 77.49%. Finally, it should be noted that there is a lack of research on the implementation of TPM in the packaging stage within the agroindustrial sector, which limits the optimization of yield, reduction of losses, and assurance of quality under conditions of high seasonal demand and sanitary restrictions.
Keywords
Empowerment, TPM, Improvement plan, Time analysis, Productivity, 5S.
References
[1] Shreeja Basak et al., “Reducing Production Losses in Additive Manufacturing Using Overall Equipment Effectiveness,” Additive Manufacturing, vol. 56, pp. 1-12, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Gabriel Alejandro Diaz Muñoz, and Diego Alfredo Salazar Duque, “Quality as a Strategic Tool for Business Management,” Podium, no. 39, pp. 19-36, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Md. Tanjid Hossen Irfan, Md. Rafiquzzaman, and Yeasin Arafat Manik, “Productivity Improvement through Lean Tools in Cement Industry - A Case Study,” Heliyon, vol. 11, no. 3, pp. 1-17, 2025.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Shrouk Awaad et al., “Impact of Material Supply Chain on the Productivity Optimization for the Construction of Roads Projects,” Scientific Reports, vol. 14, no. 1, pp. 1-13, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Miguel Angel Fernández Torres, Fabiola Elizabeth Casapaico Pultay, and Pedro Modesto Loja Herrera, “Application of Total Productive Maintenance (TPM) and 5'S to Increase the Availability of a Ham Packaging Line of a Food Company,” 4th LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development - LEIRD, Costa Rica, pp. 1-9, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[6] I. Rizkya et al., “Evaluation of Total Productive Maintenance Implementation in Manufacture,” IOP Conference Series: Materials Science and Engineering, Medan, Indonesia, vol. 1122, no. 1, pp. 1-7, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Shuting Chen, and Dengke Yu, “Exploring the Impact of Knowledge Management Capability on Firm Performance: The Mediating Role of Business Model Innovation,” Kybernetes, vol. 53, no. 10, pp. 3591-3620, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Muhibul Haq, and Julie Davies, “‘The Person with Maximum Knowledge Will Win the Race’: Conceptualizing Knowledge in Microbusinesses,” Journal of Small Business Management, vol. 61, no. 2, pp. 295-321, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Ahmet Demir et al., “Links Between Knowledge Management and Organisational Sustainability: Does the ISO 9001 Certification have an Effect?,” Knowledge Management Research and Practice, vol. 21, no. 1, pp. 183-196, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Daniela Emiliano de Souza, Camila Favoretto, and Marly M. Carvalho, “Knowledge Management, Absorptive and Dynamic Capacities and Project Success: A Review and Framework,” Engineering Management Journal, vol. 34, no. 1, pp. 50-69, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Carmen Alondra-Torres Millones, Juan Carlos Quiroz-Flores, and S. Nallusamy, “Enhancement of Productivity and Efficiency through a Service Model with Lean Service Tools-Case Study,” SSRG International Journal of Mechanical Engineering, vol. 10, no. 9, pp. 18-30, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Tryson Yangailo, Justine Kabela, and Herbert Turyatunga, “The Impact of Total Quality Management Practices on Productivity in the Railway Sector in African Context,” Proceedings on Engineering Sciences, vol. 5, no. 1, pp. 177-188, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Diego Augusto de Jesus Pacheco, and Giovana Di Giorgio Heidrich, “Revitalising the Setup Reduction Activities in Operations Management,” Production Planning and Control, vol. 34, no. 9, pp. 791-811, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Yu. G. Sledkov, L.L. Khoroshko, and P.M. Kuznetsov, “Production Management at Manufacturing Enterprises,” Russian Engineering Research, vol. 42, no. S1, pp. S102-S104, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Macarena Farah-Alva, Stefanny Montaño-Vaez, and Juan Carlos Quiroz-Flores, “Enhancing Productivity in Agricultural Packing Operations Through TPM and Lean Manufacturing: A Case Study of Asparagus Processing in Peru,” SSRG International Journal of Mechanical Engineering, vol. 11, no. 11, pp. 1-14, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Jose Herrera-Uribe, Diana Rivero-Davila, and Martin Sáenz-Morón, “Model Based on TPM to Increase the Overall Efficiency of Equipment in an Oil Company,” 21st LACCEI International Multi-Conference for Engineering, Education, and Technology, Buenos Aires - Argentina, vol. 1, no. 8, pp. 1-9, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Yulong Li et al., “Workforce Productivity Evaluation of the US Construction Industry from 2006 To 2016,” Engineering, Construction and Architectural Management, vol. 28, no. 1, pp. 55-81, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Carlos Coutinho Fernandes JuniorCorresponding Author, and Leonel Teixeira Pinto, “Productivity Increase in a Large Size Slaughterhouse: A Simulation Approach Applying Lean Manufacturing,” International Journal of Lean Six Sigma, vol. 13, no. 4, pp. 803-823, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Lisbeth del Carmen Ng Corrales et al., “Overall Equipment Effectiveness : Systematic Literature Review and Overview of Different Approaches,” Applied Science, vol. 10, no. 18, pp. 1-20, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[20] De Guzmán-Lunarejo et al., “Improvement Proposal to Increase Productivity of A SME in the Primary Manufacturing Sector Using Standardized Labor and TPM Tools,” Proceedings of the Conference on Production Systems and Logistics: CPSL, Hannover, pp. 176-190, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Andrea Chiarini, “Improvement of OEE Performance Using a Lean Six Sigma Approach: An Italian Manufacturing Case Study,” International Journal of Productivity and Quality Management, vol. 16, no. 4, pp. 416-433, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Jianling Zhang, and Guoshun Wang, “Energy Saving Technologies and Productive Efficiency in the Chinese Iron and Steel Sector,” Energy, vol. 33, no. 4, pp. 525-537, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Joe Calderon Osco et al., “Operations Management Model Based on 5S, TPM, and SMED to Increase the Effectiveness of Equipment in a Plastics Company,” 2023 International Congress on Innovation and Trends in Engineering (CONIITI), Bogotá, Colombia, pp. 1-6, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Kenshin Aranda-Gonzales, Andrea Sanchez-Gutierrez, and Martín Saenz-Moron, “Increase in Operational Availability in Agricultural Fertilizer Production: A TPM Approach with Internet of Things (Iot),” 4th LACCEI International Multiconference on Entrepreneurship, Innovation and Regional Development - LEIRD, Costa Rica, pp. 1-8, 2024.
[CrossRef] [Publisher Link]
[25] Kumar Srinivasan, Parikshit Sarulkar, and Vineet Kumar Yadav, “Operational Excellence of the Steel Industry Using the Lean Six Sigma Approach: A Case Study,” International Journal of Quality and Reliability Management, vol. 41, no. 3, pp. 826-849, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Anouar Hallioui et al., “A Review of Sustainable Total Productive Maintenance (STPM),” Sustainability, vol. 15, no. 16, pp. 1-30, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Ping-Kuo Chen et al., “Sustainable Manufacturing: Exploring Antecedents and Influence of Total Productive Maintenance and Lean Manufacturing,” Advances in Mechanical Engineering, vol. 11, no. 11, pp. 1-16, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Laura Lucantoni et al., “A Data-Driven Framework for Supporting the Total Productive Maintenance Strategy,” Expert Systems with Applications, vol. 268, pp. 1-17, 2025.
[CrossRef] [Google Scholar] [Publisher Link]