IJBTT

Business Process Model Re-Design with A Data-Based Green Lean Management Approach with OEEM: A Case of Plastic Product Manufacturing Firm

Business Process Model Re-Design with A Data-Based Green Lean Management Approach with OEEM: A Case of Plastic Product Manufacturing Firm
	© 2025 by IJETT Journal
	Volume-73 Issue-3
	Year of Publication : 2025
	Author : Joe Calderon, Mirco Cuellar, Orkun Yildiz, Duilio Aranda, José C. Alvarez
	DOI : 10.14445/22315381/IJETT-V73I3P122

How to Cite?
Joe Calderon, Mirco Cuellar, Orkun Yildiz, Duilio Aranda, José C. Alvarez, "Business Process Model Re-Design with A Data-Based Green Lean Management Approach with OEEM: A Case of Plastic Product Manufacturing Firm," International Journal of Engineering Trends and Technology, vol. 73, no. 3, pp. 289-314, 2025. Crossref, https://doi.org/10.14445/22315381/IJETT-V73I3P122

Abstract
This study addresses the growing need for sustainable practices in the manufacturing industry, driven by increased awareness of environmental impacts and regulatory pressure to reduce emissions. It explores the application of the Overall Equipment Effectiveness Method (OEEM) within the framework of Green Lean Management, emphasizing a data-driven approach to sustainable business process optimization. Despite the rising interest in OEEM, research on its implementation remains scarce, particularly regarding the barriers hindering its adoption. This article identifies and categorizes these barriers through a literature review and principal component analysis using a case study from the plastic manufacturing sector. The findings demonstrate how strategic OEEM implementation, supported by Lean Management tools (5S, TPM, SMED), can enhance machine efficiency, as evidenced by a 7.72% increase in availability and a 7.51% improvement in performance. The reduction in setup times from 248 to 117.5 minutes further underscores the effectiveness of this approach. This research provides critical insights for policymakers and industry leaders, promoting the adoption of OEEM to align economic development with environmental sustainability.

Keywords
Business Data Analytics, Green Business Process Model, Lean Management, Overall Equipment Effectiveness Method (OEEM), Sustainability.

References
[1] Diagnosis of the Production, Use and Final Disposal of Single-Use Plastics in Bolivia, WWF, Bolivia, 2011. [Online]. Available: https://wwflac.awsassets.panda.org/downloads/diagnostico_plasticos_de_un_solo_uso_wwf_bolivia.pdf/
[2] The State of Plastics: World Environment Day 2018 Outlook, UN Environment Programme, 2018. [Online]. Available: https://www.unep.org/es/resources/informe/el-estado-de-los-plasticos-perspectiva-del-dia-mundial-del-medio-ambiente-2018/
[3] Plastics Producers, Plastic-The Fast Facts 2024, Plastics Europe, 2021. [Online]. Available: https://plasticseurope.org/knowledge-hub/plastics-the-fast-facts-2024/
[4] Impact of Plastic Abandonment on Nature, Libera, 2019. [Online]. Available: https://proyectolibera.org/storage/recursos/Impacto-de-los-plasticos-abandonados_LIBERA-def-1.pdf/
[5] Juan Carlos Quiroz Flores, and Melanie Lucia Vega-Alvites, “Review Lean Manufacturing Model of Production Management Under the Preventive Maintance Approach to Improve Efficiency in Plastics Industry in Plastics Industry SMEs: A Case Study,” The South African Journal of Industrial Engineering, vol. 32, no. 2, pp. 143-156, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[6] C. Jaqin, A. Rozak, and H. Hardi Purba, “Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-Do-Check-Act Cycle,” International Journal of Engineering, vol. 33, no. 11, pp. 2245-2251, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[7] S. Adithya, and T. Anantharaj, “Enhancement of Overall Equipment Effectiveness in Automotive Parts Manufacturing Industry,” International Journal of Mechanical Engineering, vol. 6, no. 3, pp. 306-310, 2021.
[Google Scholar] [Publisher Link]
[8] Sahar ALMashaqbeh, and Eduardo Munive Hernandez, “Evaluation and Improvement of a Plastic Production System using Integrated OEE Methodology: A Case Study,” Management Systems in Production Engineering, vol. 32, no. 3, pp. 450-463, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Amitkumar Dhanjibhai Makwana, et al., “Implementation of Integrated PDCA-Kaizen in the Plastic Converting Machinery Manufacturing Industry,” International Journal of Engineering Trends and Technology, vol. 71, no. 11, pp. 116-123, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[10] James P. Womack, Daniel T. Jones, and Daniel Roos, The Machine that Changed the World: The Story of Lean Production-Toyota’s Secret Weapon in the Global Car Wars that is now Revolutionizing World Industry, Simon and Schuster, 2007.
[Google Scholar] [Publisher Link]
[11] Christian Berggren, “Lean Production-The End of History?,” Work, Employment and Society, vol. 7, no. 2, pp. 163-188, 1993.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Edward A. Silver, “Process Management Instead of Operations Management,” Manufacturing & Service Operations Management, vol. 6, no. 4, pp. 273-279, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Antonio Sartal, Xosé H. Vázquez, and Luis M. Lozano-Lozano, “Organizational Tools and Cultural Change in the Success of Lean Transformations: Delving into Sequence and Rhythm,” IEEE Transactions on Engineering Management, vol. 69, no. 5, pp. 2205-2217, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Naděžda Klabusayová, “The Possibilities for Increasing Production Processes Efficiency by Utilizing the Lean Manufacturing Principles,” Applied Mechanics and Materials, vol. 693, pp. 483-488, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Mwafak Shakoor, Mohamed Rafik Qureshi, and Samar Jaber, “Applying Management Principles of Lean Manufacturing for Enhancing Efficiency and Effectiveness of Emergency Department Rooms,” Jordan Journal of Mechanical & Industrial Engineering, vol. 13, no. 4, pp. 292-299, 2019.
[Google Scholar] [Publisher Link]
[16] Daniel Prajogo, Carlos Mena, and Anand Nair, “The Fit between Supply Chain Strategies and Practices: A Contingency Approach and Comparative Analysis,” IEEE Transactions on Engineering Management, vol. 65, no. 1, pp. 168-180, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Wallace J. Hopp, and Mark L. Spearman, “To Pull or Not to Pull: What Is the Question?,” Manufacturing & Service Operations Management, vol. 6, no. 2, pp. 133-148, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Karen A. Brown, Thomas G. Schmitt, and Richard J. Schonberger, “ASP, the Art and Science of Practice: Three Challenges for a Lean Enterprise in Turbulent Times,” Interfaces, vol. 45, no. 3, pp. 260-270, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Susana G. Azevedo, “Influence of Green and Lean Upstream Supply Chain Management Practices on Business Sustainability,” IEEE Transactions on Engineering Management, vol. 59, no. 4, pp. 753-765, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Ruggero Colombari, and Paolo Neirotti, “Leveraging Frontline Employees’ Knowledge for Operational Data-Driven Decision-Making: A Multilevel Perspective,” IEEE Transactions on Engineering Management, vol. 71, pp. 13840-13851, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Masoud Rahiminezhad Galankashi et al., “A Multiobjective Aggregate Production Planning Model for Lean Manufacturing: Insights from Three Case Studies,” IEEE Transactions on Engineering Management, vol. 69, no. 5, pp. 1958-1972, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Srijit Krishnan, Kaliyan Mathiyazhagan, and V. Raja Sreedharan, “Developing a Hybrid Approach for Lean Six Sigma Project Management: A Case Application in the Reamer Manufacturing Industry,” IEEE Transactions on Engineering Management, vol. 69, no. 6, pp. 2897-2914, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Nasim Ganjavi, and Hamed Fazlollahtabar, “Integrated Sustainable Production Value Measurement Model Based on Lean and Six Sigma in Industry 4.0 Context,” IEEE Transactions on Engineering Management, vol. 70, no. 6, pp. 2320-2333, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Sevilay Demirkesen, and Hasan Gokberk Bayhan, “Critical Success Factors of Lean Implementation in the Construction Industry,” IEEE Transactions on Engineering Management, vol. 69, no. 6, pp. 2555-2571, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Maria Monserrat et al., “Applying Lean to Improve Software Project Management Education,” IEEE Transactions on Engineering Management, vol. 71, pp. 7496-7510, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Fabiane Flores Sum et al., “Analysis of the Implementation of a Lean Service in a Shared Service Center: A Study of Stability and Capacity,” IEEE Transactions on Engineering Management, vol. 67, no. 2, pp. 334-346, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Peter Middleton, and David Joyce, “Lean Software Management: BBC Worldwide Case Study,” IEEE Transactions on Engineering Management, vol. 59, no. 1, pp. 20-32, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Lidia Betcheva, Feryal Erhun, and Houyuan Jiang, “OM Forum-Supply Chain Thinking in Healthcare: Lessons and Outlooks,” Manufacturing & Service Operations Management, vol. 23, no. 6, pp. 1333-1353, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Zhang Tian Xiang, and Jeng Feng Chin, “Implementing Total Productive Maintenance in A Manufacturing Small or Medium-Sized Enterprise,” Journal of Industrial Engineering and Management, vol. 14, no. 2, pp. 152-175, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Tamer Haddad, Basheer W. Shaheen, and István Németh, “Improving Overall Equipment Effectiveness (OEE) of Extrusion Machine using Lean Manufacturing Approach,” Manufacturing Technology Engineering Science and Research Journal, vol. 21, no. 1, pp. 56-64, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[31] Atalay Atasu et al., “Sustainable Operations Management through the Perspective of Manufacturing & Service Operations Management,” Manufacturing & Service Operations Management, vol. 22, no. 1, pp. 146-157, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[32] R. Ben Ruben, P. Nagapandi, and S. Nachiappan, “Modelling and Analysis of Barriers of Lean Sustainability in Metal Manufacturing Organizations,” Materials Today: Proceedings, vol. 45, pp. 6807-6812, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Jose Arturo Garza-Reyes, “Green Lean and the Need for Six Sigma,” International Journal of Lean Six Sigma, vol. 6, no. 3, pp. 226-248, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[34] Abdulaziz Banawi, and Melissa M. Bilec, “A Framework to Improve Construction Processes: Integrating Lean, Green and Six Sigma,” International Journal of Construction Management, vol. 14, no. 1, pp. 45-55, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[35] Ping-Kuo Chen et al., “Lean Manufacturing and Environmental Sustainability: The Effects of Employee Involvement, Stakeholder Pressure and ISO 14001,” Sustainability, vol. 12, no. 18, pp. 1-29, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[36] Anass Cherrafi et al., “The Integration of Lean Manufacturing, Six Sigma and Sustainability: A Literature Review and Future Research Directions for Developing a Specific Model,” Journal of Cleaner Production, vol. 139, pp. 828-846, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[37] Jorge Luis García-Alcaraz et al., “Effect of Lean Manufacturing Tools on Sustainability: The Case of Mexican Maquiladoras,” Environmental Science and Pollution Research, vol. 29, no. 26, pp. 39622-39637, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[38] André Luís Helleno, Aroldo José Isaias de Moraes, and Alexandre Tadeu Simon, “Integrating Sustainability Indicators and Lean Manufacturing to Assess Manufacturing Processes: Application Case Studies in Brazilian Industry,” Journal of Cleaner Production, vol. 153, pp. 405-416, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[39] Anbesh Jamwal et al., “Two Decades of Research Trends and Transformations in Manufacturing Sustainability: A Systematic Literature Review and Future Research Agenda,” Production Engineering, vol. 16, no. 1, pp. 109-133, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[40] Luay Jum’a et al., “Exploring the Influence of Lean Manufacturing and Total Quality Management Practices on Environmental Sustainability: The Moderating Role of Quality Culture,” International Journal of Lean Six Sigma, vol. 14, no. 7, pp. 1626-1654, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[41] Mahender Singh Kaswan et al., “Exploration and Investigation of Green Lean Six Sigma Adoption Barriers for Manufacturing Sustainability,” IEEE Transactions on Engineering Management, vol. 70, no. 12, pp. 4079-4093, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[42] Wilson Kosasih, I. Nyoman Pujawan, and Putu Dana Karningsih, “Integrated Lean-Green Practices and Supply Chain Sustainability for Manufacturing SMEs: A Systematic Literature Review and Research Agenda,” Sustainability, vol. 15, no. 16, pp. 1-28, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[43] Annachiara Longoni, and Raffaella Cagliano, “Cross-Functional Executive Involvement and Worker Involvement in Lean Manufacturing and Sustainability Alignment,” International Journal of Operations & Production Management, vol. 35, no. 9, pp. 1332-1358, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[44] C.M. Manmohan, and P.R. Shalij, “Optimal Prediction of Manufacturing Parameters for Integration of Lean and Sustainability with QMS in SMES,” Arabian Journal for Science and Engineering, vol. 47, no. 12, pp. 15865-15873, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[45] Marko Milosevic et al., “Sustainability of the Production Process by Applying Lean Manufacturing through the PDCA Cycle - A Case Study in the Machinery Industry,” Proceedings of the International Conference on Manufacturing Engineering and Materials, Nový Smokovec, Slovakia, pp. 199-211, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[46] Fotios Misopoulos et al., “Addressing Organisational Pressures as Drivers towards Sustainability in Manufacturing Projects and Project Management Methodologies,” Sustainability, vol. 10, no. 6, pp. 1-28, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[47] Duc T. Pham, and Andrew J. Thomas, “Fit Manufacturing: A Framework for Sustainability,” Journal of Manufacturing Technology Management, vol. 23, no. 1, pp. 103-123, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[48] Vichathorn Piyathanavong et al., “The Adoption of Operational Environmental Sustainability Approaches in the Thai Manufacturing Sector,” Journal of Cleaner Production, vol. 220, pp. 507-528, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[49] Foivos Psarommatis et al., “Zero-Defect Manufacturing the Approach for Higher Manufacturing Sustainability in the Era of Industry 4.0: A Position Paper,” International Journal of Production Research, vol. 60, no. 1, pp. 73-91, 2022. [CrossRef] [Google Scholar] [Publisher Link]
[50] Aline Ribeiro Ramos et al., “A Lean and Cleaner Production Benchmarking Method for Sustainability Assessment: A Study of Manufacturing Companies in Brazil,” Journal of Cleaner Production, vol. 177, pp. 218-231, 2018.
[CrossRef] [Google Scholar] [Publisher Link] [51] Zhe Tong, and Luisa Huaccho Huatuco, “Lean Manufacturing, Culture and Their Role on Sustainability: A Case Study in the Chinese Automotive Industry,” Proceedings of the 5th International Conference on Sustainable Design and Manufacturing, Gold Coast, QLD, Australia, pp. 1-10, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[52] Toan Tran et al., “Paradoxical Association between Lean Manufacturing, Sustainability Practices and Triple Bottom Line Performance,” IEEE Transaction on Engineering Management, vol. 71, pp. 6636-6648, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[53] José Roberto Xavier Alves, and João Murta Alves, “Production Management Model Integrating the Principles of Lean Manufacturing and Sustainability Supported by the Cultural Transformation of a Company,” International Journal of Production Research, vol. 53, no. 17, pp. 5320-5333, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[54] Vishal V. Agrawal, Atalay Atasu, and Luk N. Van Wassenhove, “OM Forum-New Opportunities for Operations Management Research in Sustainability,” Manufacturing & Service Operations Management, vol. 21, no. 1, pp. 1-12, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[55] Vishal V. Agrawal, and Sezer Ülkü, “The Role of Modular Upgradability as a Green Design Strategy,” Manufacturing & Service Operations Management, vol. 15, no. 4, pp. 640-648, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[56] Barış Ata, Deishin Lee, and Mustafa H. Tongarlak, “Optimizing Organic Waste to Energy Operations,” Manufacturing & Service Operations Management, vol. 14, no. 2, pp. 231-244, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[57] Charles J. Corbett, “OM Forum-The Operations of Well-Being: An Operational Take on Happiness, Equity, and Sustainability,” Manufacturing & Service Operations Management, vol. 26, no. 2, pp. 409-430, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[58] Charles J. Corbett, and Robert D. Klassen, “Extending the Horizons: Environmental Excellence as Key to Improving Operations,” Manufacturing & Service Operations Management, vol. 8, no. 1, pp. 5-22, 2006.
[CrossRef] [Google Scholar] [Publisher Link]
[59] Joann F. de Zegher, Dan A. Iancu, and Hau L. Lee, “Designing Contracts and Sourcing Channels to Create Shared Value,” Manufacturing and Service Operations Management, vol. 21, no. 2, pp. 271-289, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[60] Yan Dong et al., “Banking on ‘Mobile Money’: The Implications of Mobile Money Services on the Value Chain,” Manufacturing and Service Operations Management, vol. 21, no. 2, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[61] David F. Drake, and Stefan Spinler, “OM Forum-Sustainable Operations Management: An Enduring Stream or a Passing Fancy?,” Manufacturing and Service Operations Management, vol. 15, no. 4, pp. 689-700, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[62] Shanshan Hu et al., “Capacity Investment in Renewable Energy Technology with Supply Intermittency: Data Granularity Matters!,” Manufacturing and Service Operations Management, vol. 17, no. 4, pp. 480-494, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[63] Chonnikarn (Fern) Jira, and Michael W. Toffel, “Engaging Supply Chains in Climate Change,” Manufacturing and Service Operations Management, vol. 15, no. 4, pp. 559-577, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[64] V. Krishnan, Rahul Singh, and Devanath Tirupati, “A Model-Based Approach for Planning and Developing a Family of Technology-Based Products,” Manufacturing and Service Operations Management, vol. 1, no. 2, pp. 132-156, 1999.
[CrossRef] [Google Scholar] [Publisher Link]
[65] Jorge Luis García Alcaraz et al., “Effect of Green Supply Chain Management Practices on Environmental Performance: Case of Mexican Manufacturing Companies,” Mathematics, vol. 10, no. 11, pp. 1-19, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[66] Mahender Singh Kaswan et al., “Green Lean Six Sigma Sustainability-Oriented Project Selection and Implementation Framework for Manufacturing Industry,” International Journal of Lean Six Sigma, vol. 14, no. 1, pp. 33-71, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[67] Annachiara Longoni, and Raffaella Cagliano, “Environmental and Social Sustainability Priorities: Their Integration in Operations Strategies,” International Journal of Operations & Production Management, vol. 35, no. 2, pp. 216-245, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[68] Marko Milosevic et al., “Sustainability of the Production Process by Applying Lean Manufacturing Through the PDCA Cycle - A Case Study in the Machinery Industry,” Proceedings of the International Conference on Advances in Manufacturing Engineering and Materials II, Nový Smokovec, Slovakia, pp. 199-211, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[69] Sunil Kumar, Ashwani Dhingra, and Bhim Singh, “Lean-Kaizen Implementation: A Roadmap for Identifying Continuous Improvement Opportunities in Indian Small and Medium Sized Enterprise,” Journal of Engineering, Design and Technology, vol. 16, no. 1, pp. 143-160, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[70] Amitkumar Dhanjibhai Makwana, and Gajanan Shankarrao Patange, “Strategic Implementation of 5S and its Effect on Productivity of Plastic Machinery Manufacturing Company,” Australian Journal of Mechanical Engineering, vol. 20, no. 1, pp. 111-120, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[71] M.M. Shahriar et al., “Implementation of 5S in a Plastic Bag Manufacturing Industry: A Case Study,” Cleaner Engineering and Technology, vol. 8, pp. 1-13, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[72] K.M. Senthil Kumar et al., “Implementation of 5S Practices in Small-Scale Manufacturing Industries,” Materials Today: Proceedings, vol. 62, part 4, pp. 1913-1916, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[73] I.M. Ribeiro et al., “Implementing TPM Supported by 5S to Improve the Availability of an Automotive Production Line,” Procedia Manufacturing, vol. 38, pp. 1574-1581, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[74] Muhammad Harith Zainal Abidin et al., “Lean Impact on Manufacturing Productivity: A Case Study of Industrialized Building System (IBS) Manufacturing Factory,” Technology Journal, vol. 84, no. 4, pp. 65-77, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[75] S. Nallusamy et al., “Implementation of Total Productive Maintenance to Enhance the Overall Equipment Effectiveness in Medium-Scale Industries,” International Journal of Mechanical and Production Engineering Research and Development, vol. 8, no. 1, pp. 1027-1037, 2018.
[Google Scholar] [Publisher Link]
[76] J. Lozano et al., “Centerline-SMED Integration for Machine Changeovers Improvement in Food Industry,” Production Planning & Control, vol. 30, no. 9, pp. 764-778, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[77] Sérgio Manuel Oliveira Vieira, and Rui Borges Lopes, “Improving Production Systems with Lean: A Case Study in a Medium-Sized Manufacturer,” International Journal of Industrial and Systems Engineering, vol. 33, no. 2, pp. 162-180, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[78] A.Q. Basri et al., “SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software,” International Journal of Automotive and Mechanical Engineering, vol. 18, no. 3, pp. 8895-8906, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[79] Edwin Lamani et al., “Lean Manufacturing Implementation to Reduce Waste on Weighing Scale Assembly Line,” International Journal of Emerging Trends in Engineering Research, vol. 8, no. 1.2, pp. 40-51, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[80] Viren Parwani and Guiping Hu, “Improving Manufacturing Supply Chain by Integrating SMED and Production Scheduling,” Logistics, vol. 5, no. 1, pp. 1-14, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[81] Israa Abdellatif Mahmoud et al., “Integration of Benchmarking with Overall Equipment Cost Loss for Industrial Process Improvement,” Jordan Journal of Mechanical and Industrial Engineering, vol. 13, no. 1, pp. 49-59, 2019.
[Google Scholar] [Publisher Link]
[82] Seyed Mojib Zahraee et al., “Lean Construction Analysis of Concrete Pouring Process Using Value Stream Mapping and Arena-Based Simulation Model,” Materials Today: Proceedings, vol. 42, part 2, pp. 1279-1286, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[83] J.C. Quiroz-Flores, and M.L. Vega-Alvites, “Review Lean Manufacturing Model of Production Management under the Preventive Maintenance Approach to Improve Efficiency in Plastics Industry Smes: A Case Study,” South African Journal of Industrial Engineering, vol. 33, no. 2, pp. 143-156, 2022.
[Google Scholar] [Publisher Link]
[84] A.N.M. Rose et al., “The Implementation of Lean Manufacturing and Ergonomics in Small Medium Enterprise-Case Study,” IOP Conference Series: Materials Science and Engineering, vol. 702, no. 1, pp. 1-7, 2019.
[CrossRef] [Google Scholar] [Publisher Link]