A Review Paper on Nano mixed Phase Change Material for Indoor and Outdoor Solar Cooker Application
 |
International Journal of Engineering Trends and Technology (IJETT) |  |
| © 2017 by IJETT Journal | ||
| Volume-43 Number-7 |
||
| Year of Publication : 2017 | ||
| Authors : V.V. Bamane, C.V. Papade |
||
| DOI : 10.14445/22315381/IJETT-V43P266 |
Citation
V.V. Bamane, C.V. Papade " A Review Paper on Nano mixed Phase Change Material for Indoor and Outdoor Solar Cooker Application ", International Journal of Engineering Trends and Technology (IJETT), V43(7),393-397 January 2017. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
In today`s climate of growing energy needs and increasing environmental concern, alternatives to the use of non-renewable and polluting fossil fuels have to be investigated. One such alternative is solar energy. Again there is need to store solar energy because solar energy is not available for whole day and the intensity of solar radiation is not constant throughout the day time. Hence the best option to store solar energy in thermal form is the use of phase change materials (PCM) due to their large heat storing capacity than sensible heat storing material. Again there are some drawbacks of these energy storing materials such as low specific heat, low thermal conductivity, high melting point. So to overcome these drawbacks of energy storing materials such as PCM has to be done. Addition of nano particles into base PCM plays an important role in its thermal performance.
References
[1]G.Kumaresan,V.S.Vigneswarans,S.Esakkimuthu,R.Velraj,2016, “Performance assessment of a solar domestic cooking unit integrated with thermal energy storage system”, Journal of Energy Storage 6, 70-79.
[2] Nayak A.O., Gowtham M., Vinod R., and Ramkumar G.,“Analysis of PCM Material in Thermal Energy Storage System”, International Journal of Environmental Science and Development, Vol. 2, No. 6, 2011.
[3] Hajare V. S, Narode A. R., Gawali B. S., Bamane S. R., “Experimental Investigation of Enhancement In Heat Transfer using Nano - Mixed PCM”, International Journal of Engineering Research & Technology (IJERT), Vol. 3 Issue 11, 2014.
[4] Karunamurthy K., Murugumohan K., Suresh S.,“Use Of Cuo Nano-Material for The Improvement of Thermal Conductivity and Performance of Low Temperature Energy Storage System of Solar Pond”, Digest Journal of Nanomaterials and Biostructures, Vol. 7, No. 4, 2012.
[5] Sharma A., Tyagi V.V., Chen C.R., Buddhi D., “Review on Thermal Energy Storage with Phase Change Materials and Applications”,Renewable and Sustainable Energy Reviews, 13, pp. 318-345, 2007.
[6] Ahmet Sar? , Cemil A. “Synthesis and thermal properties of poly(styrene-co-ally alcohol)-graft-stearic acid copolymers as novel solid–solid PCMs for thermal energy storage”, Solar Energy 86 (2012) 2282–2292.
[7] Prabhu Bose, Amirtham v. “A review on thermal conductivity enhancement of paraffin waxas latent heat energy storage material”, Renewable and Sustainable Energy Reviews 65 (2016) 81–100.
[8] M.M.Valmiki, Peiwen Li, Javier Heyer, Matthew Morgon, Abdulla Albinali, Kamal Alhamidi, 2010, “A novel application of a Fresnel lens for a solar stove and solar heating”, Renewable Energy 36, 1614-1620.
[9] Maxime Mussard, Alexandure Gueneo, Ole Jorgen Nydal, 2013, “Experimental study of solar cooking using heat storage in comparison with direct heating”, Solar Energy 98, 375-383.
[10] S.B.Joshi, A.R.Jani, 2015, “Design, development and testing of a small scale hybrid solar cooker”, Solar Energy 122, 148-155.
[11] Mohit Bansal, R.P.Saini, D.K.Kathod, 2013, “Devolpment of cooking sector in rural areas in India – A review”, Renewable and Sustainable Energy Reviews 17, 44-53.
Keywords
Solar Energy, Solar Cooker, Latent Heat Storage, Pcm, Nanoparticle.