Optimization of Process Parameters in Turning Operation of AISI-1016 Alloy Steels with CBN Using Artificial Neural Networks
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2013 by IJETT Journal|
|Year of Publication : 2013|
|Authors : K.Mani lavanya , R.K.Suresh , A.Sushil Kumar Priya , G.Krishnaiah|
K.Mani lavanya , R.K.Suresh , A.Sushil Kumar Priya , G.Krishnaiah. "Optimization of Process Parameters in Turning Operation of AISI-1016 Alloy Steels with CBN Using Artificial Neural Networks". International Journal of Engineering Trends and Technology (IJETT). V5(6):294-297 Nov 2013. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
We report the development of a predictive model based on artificial neural network (ANN) for the estimation of Surface roughness of AISI-1016 during orthogonal turning with CBN insert tool. Turning experiments were conducted at different cutting conditions on a PSG-A141 conventional lathe using CBN uncoated insert as tool with ISO designations SNMG - 120408 and AISI-1016 as work piece using full factorial design. Cutting speed (v), feed rate (f), depth of cut (d), were the input parameters of the machining experiment as well as the ANN prediction model while the Surface roughness (Ra) was the output variable. The neural networks with feed-forward and back-propagation learning algorithms were designed using the MATLAB Neural Network Toolbox. An optimal ANN architecture with the Levenberg-Marquardt training algorithm and a learning rate of 0.1 was obtained using Taguchi method of experimental design. With the optimized ANN architecture, parametric study was conducted to relate the effect of each turning parameters on the surface roughness.The results obtained conclude that ANN is reliable method and it can be readily applied to different metal cutting processes with greater confidence.
 J. Z. Zhang, J. C. Chen, E. D. Kirby, Surface roughness optimization in an end-milling operation using the Taguchi design method, Journal of materials processing technology, Vol. 184, No. 1-3, (2007), pp. 233–239.
 F. Kahraman, A. Sagbas, An investigation of the effect of heat treatment on surface roughness in machining by using statistical analysis, Iranian Journal of Science & Technology, Transaction B: Engineering, Vol. 34, No. B5, (2010), pp. 591-595.
 V. N. Gaitonde, S. R. Karnik, M. Francisco, D. J. Paulo, Taguchi approach for achieving better machinability in unreinforced and reinforced polyamides, Journal of Reinforced Plastics and Composites, Vol. 27, (2008), pp. 909-924
 V. G. Dhokia, S. Kumar, P. Vichare, S. T. Newman, R. D. Allen, Surface roughness prediction model for CNC machining of polypropylene, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture Vol. 222, No. 2, (2008), pp. 137-153.
 V. Loganathan, A new heuristic optimization algorithm: harmony search, Simulation, Vol. 76, No. 2, (2001), pp. 60–68.
 O. Zarei, M. Fesanghary, B. Farshi, R. Jalili Saffar, M. R. Razfar, Optimization of multi-pass face-milling via harmony search algorithm, Journal of Materials Processing Technology, Vol. 209, No. 5, (2009), pp. 2386–2392.
 Adeel H. Suhail, N. Ismail, S.V. Wong and N.A. Abdul Jalil , Optimization of Cutting Parameters Based on Surface Roughness and Assistance of Workpiece Surface Temperature in Turning Process, American J. of Engineering and Applied Sciences 3 (1): 102-108, 2010
 Adesta Erry Yulian T., Riza Muhammad, Hazza Muataz, Agusman Delvis, Rosehan, Tool Wear and Surface Finish Investigation in High Speed Turning Using Cermet Insert by Applying Negative Rake Angles, European Journal of Scientific Research Vol.38 No.2 (2009): pp.188.
Model, ANN, CBN inserts, Taguchi method, AISI-1016 steel, Turning