Parametric Studies of Standard 2-D Roof Truss Configuration
Citation
Hitesh K. Dhameliya , Jaiprakash B. Sharma , Yogendra Tandel. "Parametric Studies of Standard 2-D Roof Truss Configuration", International Journal of Engineering Trends and Technology (IJETT), V11(5),214-218 May 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
Abstract
Now a day, our observation about the steel structures, Industrial trusses form one of the major structural systems, which require accurate and economic design. Their span and corresponding weight plays an important role in planning the industrial area. The shape and configuration is decided upon the span, pitch, spacing of truss, various loads and naturally the weight. In this paper a humble attempt is made to compare various truss configurations with same span, pitch, spacing of truss regarding the weight aspects. All the trusses have been analysed and designed by Staad Pro, software for the span 20 m which are the most common spans used in practices. From the parametric study, the most appropriate span will be formulated considering geometric shape, weight, economy and other criteria.
References
[1] Goldberg, D. E. and Samtani, M. P. (1986) “Engineering optimization via genetic algorithms”, Proceedings of the Ninth Conference on Electronic Computations, ASCE, pp. 471–482.
[2] Gulati, K. D. (n.d.) "Design of Truss-Structures for Minimum Weight using Genetic Algorithms", Kanpur Genetic Algorithms Laboratory (KanGAL) report No.99001.
[3] Hajela, P., Lee, E., and Lin, C. Y. (1993) "Genetic algorithms in structural topology optimization" , Topology Optimization of Structures, pp. 117–133
[4] Kang Seok Lee, S. W. (2011) "Discrete size and discrete-continuous configuration optimization methods for truss structures using the harmony search algorithm", International Journal of Optimization in Civil Engineering, 107-126 .
[5] Karim Hamza, H. M. (2003), "Design optimization of N-shaped roof trusses using", Applied Soft Computing 3, 221–235.
[6] Krish, U. (1989), "Optimal topologies of truss structures", Computer Methods in Applied Mechanics and Engineering, 72, 15–28
[7] Rajeev S, Krishnamoorthy CS "Discrete optimization of structures using genetic algorithms" Journal Of Structural Engineering ASCE 1992; 118(5): 1233-50.
[8] Rajan, S. D. (1995). "Sizing, Shape, and Topology Design Optimization of Trusses Using Genetic Algorithm", Journal Of Structural Engineering, 1480-1487.
[9] Ringertz, U. T. (1985) "On topology optimization of trusses", engineering optimization, 9, 209–218
[10] Topping, U. K. (July, 1992) "Minimum Weight Design of Structusral Topologies"Vol. 118, No. 7.
Keywords
Shape and Configuration, Parametric study, Geometric Shape,