Mechanical and Thermal Properties of Glass/Polyester Composite with Glycerol as Additive
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2014 by IJETT Journal|
|Year of Publication : 2014|
|Authors : K.S.Siddharthan , M.Sasikumar , A.Elayaperumal
K.S.Siddharthan , M.Sasikumar , A.Elayaperumal , Article:Mechanical and Thermal Properties of Glass/Polyester Composite with Glycerol as Additive , International Journal of Engineering Trends and Technology(IJETT), 7(2),61-64, published by seventh sense research group
There has been an increasing interest to improve the mechanical properties of the polymer based laminated composites. In this paper, glycerol is used as a solvent to improve the mechanical properties of glass/polyester laminated composites. Polyester resin is modified with 0, 5 and 10 wt% of glycerol. Glycerol and polyester resin are synthesized by hand stirrer. Hand layup method is used to manufacture the laminate made of bi-directional glass woven roving mat and modified polyester. The effect of glycerol is validated by subjecting all samples to the laminate mechanical testing. Results revealed improvement in the mechanical properties of the composites subjected to direct tension and compression test at ambient temperature (27oC). Impact toughness is evaluated under both ambient and low temperature (-10oC) conditions, as polyester resin is more brittle at low temperatures. Thermo gravimetric analysis results showed minor weight loss due to decrease in the cross-linking density of polyester with the addition of glycerol. It leads to the result that we can use this composite with glycerol as advanced material for wind turbine blade.
 J.M.L. Reis, J.L.V. Coelho, A.H. Monteiro, H.S. da Costa M “Tensile behavior of glass/epoxy laminates at varying strain rates and temperatures”, Composites Part B: Engineering, vol 43, pp. 2041-2046, 2012.
 Icten BM, Atas C, Aktas M, Karakuzu R “Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated plates” Compos Struct, vol 91, pp. 318-23, 2009.
 J.M.L. Reis, F.L. Chaves, H.S. da Costa M “Tensile behaviour of glass fibre reinforced polyurethane at different strain rates”, Materials & Design, vol 49, pp.192-196, 2013.
 Amal A.M. B “Impact behavior of glass fibers reinforced composite laminates at different temperatures”, Ain Shams Engineering J, vol 3, pp. 105-111, 2012.
 Fabio N, Marco Di L, Francisco J. De Caso y B, Andrea P, Antonio N “Tensile behavior of epoxy based FRP composites under extreme service conditions”, Composites Part B: Engineering, vol 43, pp. 1468-1474, 2012.
 Metin S, Numan B. B, Ersin D, Hasan Ç “the effect of temperatures on hybrid composite laminates under impact loading”, Composites Part B: Engineering, vol 43, pp. 2152-2160, 2012.)
 Tian L, Huajun Q, Yi L, Xinhui Z, Yingfeng Y, Angels S “Hyperbranched polyester as additives in filled and unfilled epoxy-novolac systems”, Polymer, vol 53, pp.5864-5872, 2012.
 Fan-Long J, Soo-Jin P “Thermal properties of epoxy resin/filler hybrid composites”, Polymer degradation and stability, vol 97, pp. 2148-2153, 2012.
Polyester resin, Filler, Mechanical testing, Thermal stability