The Mechanical Behaviour of Eggshell and Coconut Coir Reinforced Composites
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2014 by IJETT Journal|
|Year of Publication : 2014|
|Authors : B. Sudharsan, Dr.S.Sunil Kumar Reddy, M.Lava Kumar
|DOI : 10.14445/22315381/IJETT-V18P202|
B. Sudharsan , Dr.S.Sunil Kumar Reddy, M.Lava Kumar "The Mechanical Behaviour of Eggshell and Coconut Coir Reinforced Composites", International Journal of Engineering Trends and Technology (IJETT), V18(1),9-13 Dec 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
In present days, automobile industries are rapidly increased. All the automobile industries are in the process of supplying the vehicles at low cost. The major cost of the automobile components is its body parts. As per the European Union and Asian countries automotive components end life is very important factor in the design of the automotive. So everybody is concentrating on new materials which will be strong enough, less weight, recyclable with reduced cost. Hence all the researchers are concentrated on the composite materials which have all the above properties. Generally the composite materials are synthetic and natural. In that natural fibre is ahead of synthetic with their low cost, low density, stiffness, fairly mechanical properties, high specific strength, non-abrasive, eco-friendly and biodegradable characteristics. In our country much amount of coconut coir fibre is obtainable which have good tensile strength. Similarly large amount of egg shells are also on hand as wastage from food industries which normally produces pollution. But this egg shells are having good compressive strength. Hence the present work is concentrated on coconut coir fibres and egg shell composites. The strength of the composites depends on the compositions of the ingredients. So to obtain new composite materials different proportions of coconut coir and egg shell powder is added and the mechanical properties of all the components are tested and the same is represented.
 Journal of Reinforced Plastics and Composites^2 2010 29: 2387 originally published online 24 May 2010
 Banana Fiber Reinforced Polymer Composites - A Review^1
 P.Shashi Shankar^2, Dr.K.Thirupathi Reddy and V.Chandra Sekhar, Mechanical Performance and Analysis of Banana Fiber Reinforced Epoxy Composites (IJRTME) Vol. 1, issue. 4, Nov. 2013
 K. Van de Velde and P. Kiekens: Thermal degradation of flax: The determination of kinetic parameters with thermogravimetric analysis, Journal of Applied Polymer Science, Vol. 83, No. 12, pp. 2634-2643, 2002
 Avatar singh saroya^4,Study of mechanical properties of hybrid natural fiber composite
 ?Xun Lu?^7 Ming Qiu Zhang2, The Preparation of Self-Reinforced Sisal Fiber Composites
 Mueller D.H and Krobjilowski A, “New Discovery in the Properties of Composites Reinforced with Natural Fibers”, Journal of Industrial Textiles, 33(2), 2003, pp.111-129.
 Brändström J, “Micro and ultrastructural aspects of Norway spruce tracheids: a review”, IAWA Journal, 22 (4), 2001, pp. 333-353.
 Mahzan, S., Zaidi, A.M., Ahmad, Arsat N., Hatta, M.N.M, Ghazali, M.I, Study on sound absorption properties of coconut coir fibre composite with added recycled rubber, Inter. J. of integ. engg., 2(1) (2010) 29-34
 S.C. Mishra, Nadiya Bihari Nayak and Alok Satapathy: Investigation on Bio-waste Reinforced Epoxy Composites , Journal of Reinforced Plastics & Composites, Vol. 29, No. 19, pp. 3016-3020, 1999.
 Jeffrey W. Kock: Physical and Mechanical Properties of Chicken Feather Materials , A thesis presented to the academic faculty Georgia Institute of Technology, 2000.
 N.M. White, M.P. Ansell: Straw reinforced polyester composites , Journal of Materials Science, Vol. 18, No. 5, pp. 1549–1556, 1993.
 W. Wasylciw: The utilization of industrial hemp stalks in composite panels , in: Proceedings of the Meeting of the Eastern Canadian Section of the Forest Products Society ., Winnipeg, Manitoba, 1999, pp. 45-48.
Coconut coir fiber, eggshell powder, epoxy hardener and resin.