CFD Aerodynamic Analysis of Ahmed Body
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2014 by IJETT Journal|
|Year of Publication : 2014|
|Authors : Rehan Salahuddin Khan , Sudhakar Umale
|DOI : 10.14445/22315381/IJETT-V18P262|
Rehan Salahuddin Khan , Sudhakar Umale "CFD Aerodynamic Analysis of Ahmed Body", International Journal of Engineering Trends and Technology (IJETT), V18(7),301-308 Dec 2014. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
The CFD (Computational Fluid Dynamics) analysis is used to find the parameter in the automobile industry. This analysis is used to understand the fuel consumption, stability of the vehicle and passenger comfort. The air flow over ground vehicle is analysed and coefficient of drag is calculated using CFD (Ansys Fluent). For this calculation, Ahmed body (simplified car body) as ground vehicle is considered which is commonly used as test case in industry. The Ahmed body is made up of a round front part, a movable slant plane placed in the rear of the body to study the separation phenomena at 250, 350 angles, and a rectangular box, which connects the front and rear slant plane. The most significant feature of the body is the 250, 350 angle of rear slant. Air is used as a working fluid. The inlet velocity of fluid is 40 m/s. k-? turbulent model used as a standard model. Two separate cases have been solved for two different front radius of Ahmed body R80, R120 and ground clearance at 20mm, 40mm and results are comparing. The results are present in the form of drag coefficient value and flow field which include velocity contour and velocity vector fields. the validation is carried out by simulation around the Ahmed body with the rear slant angle of 250,350 .the actual wind tunnel experimental data are compared with the results.
 Ahmed, S.R. and Ramm G., “Some salient features of the time-averaged ground vehicle wake,” SAE Technical Paper 840300, 1984.
 C. M. E. Robinson, “Advanced CFD modeling of road-vehicle aerodynamics,” Phd. Thesis, University of Manchester Institute of Science and Technology, May 2001.
 R. B. Sharma and R. Bansal, “CFD simulation for flow over passenger car using tail plates for aerodynamic drag reduction,” IOSR-JMCE, vol. 7(5), pp. 28-35, 2013.
 S. Yongling, W. Guangqiang and Xieshuo, “Numerical simulation of the external flow field around a bluff car,” Shanghai Tongji University Shanghai, China.
 C. Rajsinh B. and T. K. Raj R. “Numerical investigation of external flow around the ahmed reference body using computational fluid dynamics,” Research Journal of Recent Sciences, vol. 1(9), pp. 1-5, 2012.
 D. Y Dhande, “Experimental analysis of aerodynamic aspects of sport utility vehicle,” IJEST, vol. 5(7), pp. 1476-1480, 2013.
 M. Desai, S. A. Channiwala and H. J. Nagarsheth, “A Comparative assessment of two experimental methods for aerodynamics performance evaluation of car,” Journal of scientific and industrial Research, vol. 67, pp. 518-522, 2008.
 A. I. Heft, T. Indinger and N. A. Adams, “Introduction of a new realistic generic car model for aerodynamic investigations,” SAE International, 2012.
 W. Meile, G. Brenn, A. Reppenhagen, B. Lechner and A. Fuchs, “Experiments and numerical simulations on the aerodynamics of the Ahmed body,” ISSR, vol. 3(1), pp. 32-39, 2011.
 R. Bansal1 and R. B. Sharma, “Drag reduction of a generic passenger car using vortex generator with different yaw angles,” International Journal of Automobile Engineering Research and Development, vol. 3, pp. 73-80, 2013.
 T. Regert, and Tamas Lajos, “Investigation of simple possibilities for reduction of drag due to the wheels of road vehicles,” EASC, 2009.
 N. E.Ahmed and E.Abo-serie and A.Gaylerd, “Mesh optimization for ground vehicle aerodynamics,” ISSRES, vol. 2(1), pp. 54-65, 2010.
 C. Lai, Y. Kohama, S. Obayashi, S. Jeong, “Experimental and numerical investigation on the influence of vehicle rear diffuser angle on aerodynamics drag and wake structure,” International Journal of Automotive Engg., vol. 2, pp. 47-53, 2011.
 G. Franck and Jorge D’El´?a, “CFD modeling of the flow around the Ahmed vehicle model,” pp. 1-4.
 D. P. Menon, S. Kamat, G. Yangnavalkya, S. Mukkamala and P. S. Kulkarni, “To improve the aerodynamic performance of amodel hatchback car with the addition of a rear roof spoiler,” 16th Annual CFD Symposium, August 2014.
 X. HU, Rui ZHANG, Jian YE, Xu YAN and Zhiming ZHO, “Influence of different diffuser angle on sedan’s aerodynamic characteristics,” vol. 22, pp. 239 – 245, 2011.
 M. Khaled, HichamElHage , FabienHarambat , H. Peerhossaini, “Some innovative concepts for car drag reduction: A parametric analysis of aerodynamic forces on a simplified body,” Elsevier, vol. 107, pp. 36-47, 2012.
 D. K. Kalyan and A.R. Paul, “Computational study of flow around a simplified 2D ahmed body,” IJESIT, vol. 2(3), pp. 148-153, 2013.
 H. Lienhart, C. Stoots and S. Becker, Flow and turbulence structures in the wake of a simplified car model (Ahmed Model).
Aerodynamics, Ahmed body, k-? model, CFD, drag coefficient.