Analysis of Single Point Cutting Tool of a Lathe Machine Using FEA

  IJETT-book-cover  International Journal of Engineering Trends and Technology (IJETT)          
© 2015 by IJETT Journal
Volume-20 Number-5
Year of Publication : 2015
Authors : NBV Lakshmi Kumari , S. Irfan Sadaq , G. Prasana Kumar
DOI :  10.14445/22315381/IJETT-V20P241


NBV Lakshmi Kumari , S. Irfan Sadaq , G. Prasana Kumar "Analysis of Single Point Cutting Tool of a Lathe Machine Using FEA", International Journal of Engineering Trends and Technology (IJETT), V20(5),214-217 Feb 2015. ISSN:2231-5381. published by seventh sense research group


The geometry of cutting tool surfaces is one of the crucial parameters affecting the quality of manufacturing process and has been traditionally defined using the principles of projective geometry. The parameters of geometry defining the various cutting tool angles are described by means of taking appropriate projections of the cutting tool surfaces. Development in the field of computer Aided Geometric Design(CAGD) now provide more elegant approach for specifying the cutting tool surfaces as a set of biparametric surface patches. This study of machining processes involves analyzing the chip formation process. Years of research has conclusively shown that it a process involving plastic deformation in which large strains and strain rates are developed by localized shear deformation of work material immediately ahead of tool. Heat generated during the chip formation process as a result of plastic deformation and friction. The heat influences chip shape, tool wear, surface finish and cutting forces.


[1]. Prasanna P Kulkarni*, Shreelakshmi.C.T., Shruti.V.Harihar, Radha Bai.N. “An Experimental Investigation of Effect of Cutting Fluids on Chip Formation and Cycle Time in Turning of EN-24 and EN-31 Material”, IJSER (ISSN:2277-9655) Nov – 2014, PP: 574-582.
[2]. NPTEL – Mechanics of Machining,
[4]. Lowen E.G. and Shaw M.C, on the analysis of cutting tool temperatures, Transactions of the ASME, 001.76 pp-217-231,(1954)
[5]. D.A. Stephenson, Tool –work thermocouple temperature measurements: theory and implementation issues, Proceedings of winter Annual meeting of ASME, Anaheim CA.November (1992), pp-18-95.,
[6]. EI Wardany, T.I Mohammed, E, Elbestawi, M.A., Cutting temperature of ceramic tools in high speed machining of difficult to cut materials. Int.J.Mech Tools,Manuf. (1996), 36(5), 611-634.
[7]. L.B.ABHANG* and M. HAMEEDULLAHDepartment of Mechanical Engineering, Aligarh Muslim University, Aligarh, India “Chip-Tool Interface Temperature Prediction Model for Turning Process” 2010.
[8]. S.K Choudhary, G.Bartarya, Role of temperature and surface finish in predicting tool wear using neural network and design of experiments.Int. J.of machine tools and manufacture,43, (2003), 747-753.
[9]. Federico M. Aheiro Reginalot, Coelho, Lincdnc, Brandao, Turning hardened steel using coated carbide at high cutting speeds. J.of the Braz.soc.of Mech.sci.and Engg.(2008), 1109
[10]. H.Ay, W.J Yang, Heat transfer and life of metal cutting tools in turning, Int, J. Heat and mass transfer,41,(1998),613-623.

Depth of cut, Rake angle, Nose angle, Back rake angle, feed, relief angle.