IJBTT

Comparison of Various Types of Roofs in PEB

	International Journal of Engineering Trends and Technology (IJETT)
	© 2015 by IJETT Journal
	Volume-22 Number-8
	Year of Publication : 2015
	Authors : S.Jagadesh kannan, V.Vanitha
	DOI :  10.14445/22315381/IJETT-V22P272

Citation 

S.Jagadesh kannan, V.Vanitha"Comparison of Various Types of Roofs in PEB", International Journal of Engineering Trends and Technology (IJETT), V22(8),347-351 April 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group

Abstract
Pre Engineered Building systems have become a great alternative to conventional steel buildings due to its advantages like faster construction, easy fabrication and economy. In this contest more researches on pre engineering buildings (PEB) are being done to make it more efficient. In this paper Pre Engineered Buildings (PEB) with different roof shapes such as Curved, Pitched & Mono slope have been compared. The study involves an industrial building of length 77.5m and width 25m, with different shapes of roof system. Analysis and design are done using STAAD PRO V8i and results are compared, to understand the behaviour of different roof shapes of Pre Engineered Building.

 References

[1] IS: 875 (Part 1) – 1987: Code of Practice for Design Loads (Other Than Earthquake) for Buildings and Structures- Dead Loads.
[2]IS: 875 (Part 2) - 1987: Code of Practice for Design Loads (Other Than Earthquake) for Buildings And Structures- Live Loads
[3]IS: 875 (Part 3) - 1987: Code of Practice for Design Loads (Other Than Earthquake) for Buildings and Structures- Wind Loads.
[4] Dr. N. Subramanian, “Design of Steel Structures”.
[5] IS: 800 - 2007:- General Construction In Steel- Code of Practice.
[6] Kanakambara Rao et al. “Design of Pre-Engineered steel structures building and to choose a material which offers low cost, strength, durability, design flexibility and recyclability”, International Journal of Engineering Research and Applications (IJERA), Vol. 2, Issue 2, April 2012, pp: 267-272.
[7] Kulkarni A.V., “Comparative Study of Analysis and Design of Pre-Engineered Buildings and Conventional Frames and various advantages of PEB’s”, IOSR journal of mechanical and civil engineering, Volume 5, Issue 3, Jan. – Feb. 2013, pp: 47-53.
[8] Jatin D.Thakar, P.G. Patel, “Comparative Study of Pre- Engineered Steel Structure by varying width of Structure”, International Journal of Advanced Engineering Technology, Volume IV, Issue III, sept 2013, pp: 56-62.
[9] Pradeep V , Papa Rao G, "Comparative Study of Pre Engineered and Conventional Industrial Building", International Journal of Engineering Trends and Technology, Volume IX, Number 1, Mar 2014, pp: 1-6.

Keywords
Pre Engineered Building, STAAD Pro V8i, Curved roof, Pitched roof, Mono slope roof.