A Review: Design and Weight Optimization of YJ3128 Type Dump Truck?s Frame
|International Journal of Engineering Trends and Technology (IJETT)||
|© 2015 by IJETT Journal|
|Year of Publication : 2015|
|Authors : Dharmendrasinh Parmar, Divyesh Morabiya
|DOI : 10.14445/22315381/IJETT-V23P209|
Dharmendrasinh Parmar, Divyesh Morabiya "A Review: Design and Weight Optimization of YJ3128 Type Dump Truck?s Frame", International Journal of Engineering Trends and Technology (IJETT), V23(1),45-47 May 2015. ISSN:2231-5381. www.ijettjournal.org. published by seventh sense research group
To studies the YJ3128-type dump truck’s sub-frames, for the fatigue crack occurred in the Sub frame witch has worked in bad condition for some months, the truck’s working conditions and the load of 16tonne features are researched, and ANSYS is used to analyze the stress of the sub-frame. To reduce weight and cost by changing section of frame and materials and also select best section of frame and material. The reason for the cracking of the frame is found, and the improving method. A theoretical basis is provided for the improvement of the frames’ designing, and an important reference is provided to improve the truck frame’s design methods.
 Hirak Patel, Khushbu C. Panchal, Chetan S. Jadav “Structural Analysis of Truck Chassis Frame and Design Optimization for Weight Reduction” Volume-2, Issue-4, April 2013, Sadvidhyamandal Institute Of Technology,Bharuch, Gujrat.
 Hemant B.Patil1, Sharad D.Kachave, Eknath R.Deore, “Stress Analysis of Automotive Chassis with Various Thicknesses” ISSN: 2278-1684 Volume 6, Issue 1 (Mar. - Apr. 2013), Dhule North Maharashtra University, India.
 Chen Yanhong, Zhu Feng, “The Finite Element Analysis and the Optimization Design of the Yj3128-Type Dump Truck?s Sub-Frames Based On ANSYS “ 2011,Mechanical and Electrical Engineering Institute of Kaifeng University , Kai Feng 475004, China.
 Sandip Godse, Prof. D.A.Patel, “Static Load Analysis Of Tata Ace Ex Chassis And Stress Optimisation Using Reinforcement Technique” Volume4 Issue7- July 2013, Mech. Dept, SPCE, Visnagar, Gujarat.
 Sairam Kotari , V.Gopinath, “Static And Dynamic Analysis On Tatra Chassis” Vol.2, Issue.1 QIS College Of Engineering &Technology Ongole,Andhra Pradesh.
 Tushar M. Patel, Dr. M. G. Bhatt and Harshad K. Patel, “Analysis and validation of Eicher 11.10 chassis frame using ANSYS”, Volume 2, Issue 2, March – April 2013, LDRP-ITR, Gandhinagar, Gujarat, India.
 Mohd Hanif Mat, Amir Radzi Ab. Ghani, “Design and Analysis of Eco Car Chassis”, IRIS 2012, Universiti Teknologi MARA, Shah Alam, Malaysia.
 Mohd Azizi Muhammad Nora, Helmi Rashida, Wan Mohd Faizul, Wan Mahyuddinb, Mohd Azuan, Mohd Azlanc, Jamaluddin Mahmuda, “Stress Analysis of a Low Loader Chassis”, IRIS2012, Universiti Teknologi PETRONAS, Tronoh 31750, Malaysia.
A theoretical basis is provided for the improvement of the frames’ designing, and an important reference is provided to improve the truck frame’s design methods.